Unicable tuner configuration for Non-FBC tuners

Here's roughly how to configure a tuner for a Unicable LNB on non-FBC tuners.

Tuner settings

• Type of LNB/device: SCR (Unicable/Jess)
• SCR (Unicable/Jess) type: LNB — unless you're using a Unicable/Jess switch.
• Manufacturer: self-explanatory.
• Model: self-explanatory.
• Position: leave as 1 (some LNBs can be programmed and used in combination).

Repeat for every tuner, and make sure you never re-use the same user-band channel — this applies to all tuners accessing the LNB, even ones on a different receiver.

You can use a Unicable LNB on one tuner and normal LNBs on a DiSEqC switch on another physical tuner of the same receiver.

Some Unicable LNBs also have legacy ports — for example the GT-Sat GT-S3DCSS24. A possible setup is shown here (thanks to willo3092 for the picture).