Enigma2 Boot Video Tutorial

vidim da u zadnje vrijeme ima dovoljno upita kako instalirati bootvideo u resiver.

Evo tutorijal.

za početak treba vam bootvideo-sphere-sgs_all.ipk( datoteka priložena )

ili ako koristite satvenus panel, od tamo možete skinuti direktno u resiver.

pripremite bootvideo i 3 mvi datoteke koje želite koristiti.

sada kreće pravi tutorijal!

Nakon instalacije bootvideo-sphere-sgs_all datoteke napravite reboot resivera

(kod ponovnog pokretana resivera vidjet ćete promjenu ).

sada idemo zamijeniti bootvideo i mvi datoteke koje ste odabrali.

1.pokrenuti DCC (ili što već koristite ).

2 putanja usr/share/vuplus-bootlogo

3.otvoriti vuplus-bootlogo folder i samo zamijeniti bootvideo i 3 mvi datoteke

sada ide drugi dio poslića koji je bitan da se vidi vaš bootvideo i bootlogo (slika )

- usr/share ( tu se nalaze 3 mvi datoteke ) koje morate obrisati i samo ubaciti vaš

backdrop.mvi.

nakon svega ovoga ponovno napravite reboot resivera i to je to.

kod pokretanja resivera vidjet ćete svoj odabrani bootvideo i bootlogo.

nadam se da sam vam ovim tutorijalom dovoljno pomogao.

ovo vrijedi za sve enigma2 resivere ( ne samo za vu+).

evo i priložene slike za bolje snalaženje.

-----------------------------------------------------------------------------------------

I see that lately there is enough query to install the bootvideo in the enigma2 receiver.

Here's the tutorial.

To get started you need bootvideo-sphere-sgs_all.ipk

https://www.linuxsat-support.c…video-sphere-sgs-all-ipk/

or if you use a satvenus panel, from there you can download directly to the resiver.

Prepare the bootvideo and the 3 mvi files you want to use.

now the real tutorial is moving!

After installing the bootvideo-sphere-sgs_all file, make the reboot of the rescue

(you'll see a change for a resetable resiver).

now we are going to replace the bootvideo and mvi files you have selected.

1. Turn DCC (or whatever you are using).

2 paths usr / share / vuplus-bootlogo

3. open the vuplus-bootlogo folder and just replace the bootvideo and 3 mvi files

Now, another part of the job is going, which is important to see your bootvideo and bootlogo (image)

- usr / share (there are 3 mvi files) that you need to delete and just insert your

backdrop.mvi.

after all this, re-create the reboot reboot, and that's it.

When starting rescue, you will see your selected bootvideo and bootlogo.

I hope that I have helped you with this tutorial enough.

This applies to all enigma2 receivers (not just for woo +).

Here are the attached images for better use: