How to flash a Mutant HD60 4K Android Enigma2 Receiver

Flashing a new Enigma2 image onto your Mutant HD60 4K from a USB stick is quick — the whole process takes about 1.5 minutes.

📥 Images: Support & Enigma2 image downloads

Flashing the receiver

1. Power off the receiver.
2. Insert the USB stick with the image files into one of the receiver's USB ports.
3. Press and hold the small button next to the TF card slot on the left side of the box.
4. Power the receiver on.
5. After a short while the red power LED on the front starts to blink — you can now release the button.
6. On success, the receiver reboots itself once flashing completes.
7. During setup you'll be offered the chance to restore a previous backup, if you've made one on your USB stick.

⚠️ Don't interrupt the flash. While the receiver is flashing, do not power it down for any reason — doing so can cause serious or permanent damage.