Search Results

AMIKO HD265 Edision new softer 1451 HD+ CARD (HD01,02,03,04,05), PowerVU, HOTKEY setting, Digea, MEGA, ERT, BBC, Ant1 Europe... NETMEDIA: PAOK TV App, WEB TV LIST, Stalker IPTV, Youtube, Youporn, Weather, RSS, EZ IPTV, Xtream Codes ! 1.Softer all+bootloader 2. Miscellaneous Settings: important for remote put Standby Mode to FAKE !!

…E new softer Edision Piccollino Led v.2486 HD+ CARD (HD01,02,03,04,05), PowerVU, HOTKEY setting, Digea, MEGA, ERT, BBC, Ant1 Europe... NETMEDIA: WEB TV LIST, Stalker IPTV, Youtube, Youporn, Weather forecast, RSS, EZ IPTV, Global IPTV, Yellow IPTV, Xtream Codes !!! Softer 2486 test: OK You tube,Stalker,Xtream Codes,You porn,Web tv..this is good only fabric Webtv list not work(not good)! 1.softer download all+bootloader…

Hello, I bought a new h7s and I have a problem with box sometimes does not want to start( stays on boot) as soon as I can run it after a while freezes. I uploaded various images and still have the same problem. What could I do with this? New bootloader where to get it. can anyone help me? Thank you

(Quote from Pablo2020) If it was a cloned box you will see a sim card mounted on the mainboard. (Quote from Pablo2020) You have an ancient bootloader. First upgrade the bootloader (install both files linked below), then try flashing the image. Latest Secondstage Bootloader For DM800 opendreambox-2.0.0

Working well, installed on DM520 HD Mini Original box (Bootloader #103). But, sometime distorted picture on BBC One, BBC Two channels (Astra 28.2E). Frequency: 10847 MHz SNR: 15.2 dB Astra 28.2E Astra 19.2E Eutelsat 16.0E Hotbird 13.0E This is not the case on Pure 6.3, ATV 6.4 images. Thanks.........

yes, this mini usb port, is the serial port for this receiver. you can flash through serial, a correct one image for your receiver, and recover it. also,there was a recovery tool by yassinov, which had the bootloader for most dmm models (original and clone).

…se any release version of WLED in the plugin. An update check is built in, so that you will be informed when there are new ones. Save 'Custom Builds' in / media / hdd / WLED, these are then offered for flashing in the plugin. Flash ESP8266, and bootloader for ESP32 Flash the xxx_ESP32xxx.bin to ESP32. With 'RED' (reset) you can delete the flash. If you experience problems, run this command before trying "write_flash" again. (Note: This will delete all settings saved on the ESP!) You can flash an…

CLOUD-IBOX III-SE-bootloader-cloud-ibox-3-751mhz_piterfree cloudix (Openatv-6.4-mbmini-20200527) Vhannibal E2 Dual Feeds Dtt Milano Plugins: EPGImport .... 2020 ok DreamExplorer tvPanel SatVenusPanel emu: oscam-stable ok TvSat SD + HD NB: of all those images that I have tested the best stable is this openatv-6.4 (Code, 1 line)

OPENVISION 10.1r155 FOR DM800 sev2 ssl88a for externel flash only GStreamer: 1.17.0.1 version python :2.7.18 ">"> ">"> original ssl 89 - https://images.openvision.dedy…ision/Dreambox/dm800sev2/ after installation, without overloading the receiver, install the bootloader for the clone ssl88a , and only then click on the reboot Secondstage-dm800sev2 : SSL89 for Original, SSL89J for Japhar, SSL88A for Sim2

Working good, installed on DM525HD Original box (Bootloader #103), File : openpli-enigma2-7.2Star-dm520_Original_GStreamer_1.17.0.1_20200526.tar.xz Emo

1 + 2 Cypress procedures 1 * sent via Cypress cfe.bin..this for SE bootloader-cloud-ibox-3-751mhz 2 * via usb put the soft cloudix (OpenPli image) but the 2 decoders I have are CLOUD-IBOX III-SE I'm going to do the working backup to send once with Cypress. the file .... Cloud my backup ... it's complete. -------------------------------------------------- ------------------------------ 3 * Cloud III-SE OpenPli 4.bin image (with full Cypress) (Code, 1 line)

Boite clone tuee !... remplacement du chip flash et programation du bootloader CFE avec Jtag... Emo

:wtf1: I ma really bored with my sf8008 Octagon is playing all the time with the drivers and bootloader which leads to complete reprograming of the box. It is surprising that the best quality of tuner signal reception is from openblackhole image from friend EDNAZ, I ma thinking to sell this box. It not support starting all over every month,. I will shift for sure on ather linux brands, It is more important to have a good and stabele image rather then 4 useless...... Goodbye OCTAHON:shocking:

Hi Need bootloader for Xtrend ET8500. The links shown on support are no longer there, can anyone steer me in right direction please? Much appreciated

…tion file that you're missing? Can you show a partition file for other models, so I can take a look? Again, might not do much good without serial communications working and you don't want to go the JTAG/physical chip removal way. Note: I wouldn't even go the HiTool way to start with, as if the bootloader…

…://www.zgemma.org/download…gs-3798mv200-20190531.zip or http://www.zgemma.org/download…ot-3798mv200-20190531.zip (gleaned from your github repository), right? At least the bootargs_h9.txt file gives an idea of the flash map, devices, the presumed presence of a serial console, etc... And the fastboot_h9.bin gives an idea of the bootloader…

…ver from it without flashing everything else. @jeneverest might be on to something regarding flashing a single slot, but I've never seen it explained anywhere, although I'm planning some tests on the weekend as this seems to be possible from what I gleaned from the bootloader…

Hi i have a cloud ibox 2 plus se bootloader 751 mhz i think that is a original so i want to flash a blackhole image and i heard that is no longer supported ( only 2.1.7) and heard that he has a clone box So please wich other clone box image can i install it on my box ??? I’m on openatv 6.3 it’s a beautiful image but it’s a very slow 😐😐😩😩😩

(Quote from Snoopy8) power the box wait till you see portal loading screen hit manu button it will take you in to inner portal go to /syston setting/servers/portals / edit portal url (Quote from Snoopy8)

…sue and have tried to USB and multicast flash with 'Noblock' firmware. All to no avail with error message 'awaiting operator key':not happy:. I have also connected the Mag to my laptop using a USB to TTL adapter FT232 to access the bootloader menu. I know which operator key parameter to change but the problem is that I cannot stop the bootloader…