Search Results

…Depending on which bootloader currently installed on the box, the folder name must be adjusted accordingly. If there is still an old booltloader of the 1st generation on the box (boot display ET9000), then the folder must be called et9000. If a bootloader of the 2nd generation is already installed (recognizable by the boot display ET9X00), then the folder must be named accordingly et9x00. This has nothing to do with the version of the boot loader included in the installation folder! A second gen…

…lity. Adding new shortlink Firmware docs This shortlink launches my website at STB.You can download it from Downloads subpage on my website and flash by Bootloader / System Recovery Utility menu. As I've said, unfortunately this must be done by Bootloaders (USB method preferred), but any next upgrades should be available through STB settings. This image is available for all STBs expect MAG 420/424. Support for those STBs is planned soon. The second great news is that I've done a better and more …

Διαφορικό SW γιατί έχει και διαφορετικο επεξεργαστής άρα και bootloader

For AX/Mutant HD51 gives a new Linuxroot Layout for Restore to the first Partition, you must need a new bootloader V107r27 hd51-bolt-v107r27.zip

SSL89J exists for Japhar and SSL89 for Original boxes... Sim2 is just old and unsupported since years... they stopped at the SS88A. Attached you will have the Secondstage 89 bin and NFI (Original), the Secondstage 88A bin and NFI (Sim), and the Secondstage 89J bin and NFI (Japhar). Emo linuxsat-support.com/filebase/…r-japhar-ssl88a-for-sim2/

…layer3 as it works correctly with subtitles etc.). 4) For CS and Streaming/IPTV Player I tested with and without VPN (SufShark) and it was all fine! 5) Playback from NAS or PC/laptop is OK... 6) Last but by no means least, I wrote a careful, detailed "How to": -recovery image which partitions the eMMC flash and/or flashes the bootloader…

… /media/hdd (for EPG, backups, etc) so no more need for USB sticks. For the new system to work properly, one has to have the latest sf8008/viper4k bootloader --> install the pure2 image via USB rescue mode. Otherwise, it is very likely that the bootloader will NOT recognize GPT partitions on the micro SD card The procedure is basically like this: Setup-->MultiBoot Maintenace-->InitSD card reboot From here on you could do FlashOn Line (change STARTUP to STARTUP_2 or _3) to flash another image to …

(Quote from panorama) ξαναδοκιμασες να περασεις 4.0 ? το 6.0 πιθανων να εχει θεμα με τον χωρο του δεκτη (αν και σε 5000 το περασα, απλα χωρις αλλα προσθετα,η flash ειναι 99% ) το original πιθανων να μην το παιρνει,λογω παλαιοτερου bootloader (4000 αντι για 4Χ00) με τα στικ... πονεμενη ιστορια αυτοι οι δεκτες. οσο πιο μικρο βρεις τοσο καλυτερα (και επισης αφου δοκιμασες ενα με επιτυχια, ξαναδοκιμασε με εκεινο)

…tory, on a FAT32 USB stick and copy the latest PurE2 *.zip image as well (do not unzip the image file, only recovery). Flash the recovery image as needed per box (HD60 side button, H9combo front button) and try to have fun. Once the new x stage bootloader/recovery is flashed, you can flash the image. 2) USB reflash (not online) is needed as well to install new recovery. 6) There is a new mode to show a Zap History, now preset. As epg.dat can be quite large for some users (10-40MB), standard Hist…

…Well I'm learning fast but admittedly still a newbie. I'm not sure what to call my IP, they are a very obscure/small outfit (conway.tv) that seem to have had a bit of a monopoly in some apartment developments. Being a newbie I don't know if I have a special bootloader…

In short (and perhaps of not much good), I'm surprised that a legit IE IP did provide SH4 boxes by default. Nice:) If they do not have special bootloader, you should be fine with reflashing with any image. Try too google 'how to flash sab triple' and amiko alien2. Front panel buttons are not the same but the principle is.

Hi you might want to try reloading your previous image again , sounds like a bootloader problem that I had before. And also check the voltage on your power supply that plugs into the wall , make sure its supplying the proper voltage. :fingers crossed:

Nope, you should be ok with flashing the bootloader, but life would be very simple if this will solve the problem :) I hope it does.

Hi tromo, thanks for your reply. Capacitors seems to be good by visual inspection. I dont have equip to test them. So i will try to see if i can flash the bootloader. Is there a possibility of worsening the situation in this way? For now the front panel still works.

Which image and bootloader had before in receiver, and why you try to install so old and outdated SSL? I think for your sim 2.0.1, you have to find ssl 84b or ssl 84D, if I do not mistake.

hi all I need help I expose my problem I have a 800 hd clone sim 2.0.1 receiver by mistake I sent it in error again with blackhole secondstage 69 very dated now I can't bring it up with a recent image I did so many tests but nothing surely I'm wrong if you can help me please:plannedsomethingevil:

If I recall correctly, there are at least two possible reasons for this kind of error: - corrupt u-boot environment - bad capacitors (the ones under the card reader seem the 1st to go, but changing other big ones cannot hurt) - less likely: bad security chip, bad NOR chip In a case you can access the box via ttl/rs232 here is 8900 bootloader. u-boot-8900.zip

…i.e. "h9combo.zip". One will also see an Android partition - but we are still waiting for that OS to be published... Thanx to delfi for the procedure info!!! P.S. This recovery procedure is to be done only once, in order to install the secondary bootloader…

Oh thank you for the awesome information here! As you said there is a RS232 indeed on the back and as you have mentioned it seems that I require the RS232 cable for sure to get it fixed. I did just check if my motherboard did have the RS232 but it seems like this is the only options I have (sorry for the big picture) So this is not looking very good on that side and also Idid check the USB-to-RS232 and here in Sweden they do take around 40-60$ for a converter like that, is that a normal price? I…

…ection method if you want to flash something into the box. Through the RS232 interface, it should be possible to load a new bootloader. You could do this with the "Dreambox NO CA FOUND Repair Tool NCF SIM2 v2.1" tool. Since I haven't done it yet, I won't tell you the exact procedure. Unfortunately, you have to search the internet. But be careful, it's no fun. On Google you will find many tutorials, as well as how to upload the bootloader…