Search Results

Καλησπερα. εχω ενα Dreambox 800 original και οταν παω να περασω image μεσω broswer κολλαει στο 1%. Δοκιμασα και κατεβηκα στο bootloader 72 και ξανα στο 84 και παλι κολλαει στο 1% οταν παω να το περασω λογισμικο.ξερει καποιος πως να λυσω αυτο το προβλημα? ευχαριστω.

…d am stuck with how to mod it. It seems to be running something non-standard, but i dont know what, all menus have been disabled and it totally locked down. I want to install something else on it and use it with 28e and 19e. when plugged in the box first displays "test", followed by "nbox" then nand. holding the up button while powering the box on gives me the following: nfs, pktn, hdd1 hdd2 hdd3 usba usbb. im trying to figure what bootloader…

(Quote from bibic) Now just updated image online everything good now

On jb8a8f8 I write my problems with dm900 sim 2.30. Now I have original bootloader (zImage-rescue-3.14-r0-dm900-20170801.bin) from dreamboxupdate. You can try, but your risk. If your receiver work leave him alone.

(Quote from bibic)

I not find bootloader for clone yet. But your receiver work? Running ok?

(Quote from bibic) Clone and I'm talking about CA error and how to update rescue bootloader

Original or clone? Update your rescue bootloader.

how to change bootloader now my box showing loader 102 How install new bootloader my box is original dm520

(Quote from master G) I get "ERR01: NO CA FOUND" message if I do that?

Put the box into flash mode. Flash the bootloader via a browser -> Latest Secondstage Bootloader For DM800 Clone Sim 2.01 Don`t reboot yet. Open another browser and flash an image from here -> DM800 Sim 2.01 SSL 84 Images Reboot.

…stroom. I was stupid enough to flash the original openpli image: openpli-2.1-beta-dm800-20140510. Result was that I had a "ERR01: NO CA FOUND" message. Bought a serial cable and fixed it with JapharFlasherv1.1 (patched DreamUp version) and used bootloader secondstage-dm800-84_allsim.nfi from Japhar. I tried a lot of images and get everytime that the tuner A <empty> and tuner B <empty> and I have only one tuner?? Besides that everything works fine. After many tries, my tuner is only detected with…

…you have nothing to loose some things work for others some do not but if we do get our issues fixed then at the end of the day we have a working box again the things above are what i tried and it worked ,now maybe it was because i reflashed the bootloader or maybe it was the way i set up the flash to usb sorry but at the end of the day all i know is my box does work step 1 format usb to fat 32 step 2 send the extracted zgemma folder to usb do not drag step 3 make new folder on desktop then send …

I have flash the bootloader then the image, but without any result.

(Quote from takada) yes, it is worth a try. Flash the bootloader (it only takes about 10 seconds to flash) turn off power, then flash an image right after (please make sure when you are flashing the box, you have disconnected all other items... HDMI, ethernet cable, hard drive, satellite feeds etc etc)

So, I've tried all usb flash that I have. All were low-level formatted with that tool. Something interesting that I've observe: When it is on, red light is on with boot and very very quick it is green. On another good zgemma that I have, the red light is longer up with boot, than it is green and there are numbers of loading. The bad stb red light is very shortly... Maybe I have to try flash bootloader?

(Quote from master G) There are 3 of them, which are correct to use? dreambox-secondstage-dbg_3-dm520-r0.1_mipsel.deb dreambox-secondstage-dev_3-dm520-r0.1_mipsel.deb dreambox-secondstage_3-dm520-r0.1_mipsel.deb Latest SSL Secondstage Bootloader for DM520

(Quote from kazuya1) This is normal. Which way were you flashing images before ? Try the PurE2 image again -> PurE2 6.2 for DM520/525 HD Once the image loads install the latest bootloader in telnet: FTP bootloader.deb to /tmp folder then run this command in telnet then reboot dpkg -i /tmp/*deb

(Quote from master G) on sim card wrote dreambox security sim a8p i download the Latest SSL Secondstage Bootloader for DM520. but its show in valid type file . :( when rescue mode i got an ip address. that ip put in my browser... its show tree option there device information online recovery firmware upload.

(Quote from master G) I also try to patch my DM800 HD like this, is it normal that I do not see any progress while flashing? It looks like nothing is happening. Wait a few minutes, that is the only thing that's commented before I patch.