Search Results

i have written the bootloader to the original chip from box and the one i intended to replace it with, i verified both as well with the same program i used to write them, i thought i would read both chips and save the files and use a comparison tool against the bootloader i wrote to them, the program comes back to say the files are different on both chips. do i have the right bootloader, i cant register on the zgemma site to get it from there

(Quote from loady) The make of chip should not matter, but you do need to triple check the pin outs are the same, and voltages....check the specs of both to compare....normally you can find sites that will compare the makes for you.... the mb size of chip i am not sure if that will make a difference or not ?? Bigger should be okay?? Not tried myself... The heatsink should free up easier with some heat from your work station... carefull as you do not want the chip it is protecting to come up with…

…ing i can possibly write the bootloader to this and solder it in, you think it will do the same job, i think its just a different brand chip as they are both serial eeprom i think the sapnsion one though is 16mb. I have just written the z gemma bootloader to the spansion S25FL0168*SOIC8 and it has taken it ok, as i have to desolder the WINBOND chip out of the zgemma i think i might just solder in the spansion and see if it has worked, would i expect to see the LCD back up and ruinning, ie saying…

(Quote from satmario) Its the second stage bootloader 87F for dreambox 500hd and 800se. If you are worried about using it try the attached version.

(Quote from satmario) Its the second stage bootloader 87F for dreambox 500hd and 800se. If you are worried about using it try the attached version.

Can you confirm I located the correct chip..I might take this one out and see what's on it as you said then erase it and reflash. I had managed to get it back to boot but was still looping so I flashed the bootloader from zgemma site and after that I was left with red light and blank LCD. The wimdbond chip is very close to that heatsink which is in the way a bit, the heatsink seems to be glued on pretty hard.

(Quote from loady) That is exactly right, i have done this for several boxes, the bootloader is stored there...so simply flash with the boot.bin file (aka bootloader) Before you throw away or erase the old chip see if there is anything on it. ? How did the box get bricked in the first place, try as i may.... i am yet to brick a zgemma myself but did recover a couple for a mate a while ago.... good luck

(Quote from alimac) Can i get a link to this image?

Hi... Disconnect power, keep on / off switch in front while reconnecting power. Hold on / off switch until the display comes up with an ip address. Release the switch This ip address DM has been assigned. Open your browser, enter the IP in address field, enter, and you will then get in touch with DM to upgrade Second Tage Bootloader and to enter new image.

The image must match the second stage bootloader. If the image flashed has a different bootloader than #76, you also need to flash the bootloader. For example you flashed this image -> OpenTSimage-2.4_DM800_Sim2-SSl84D-20170715.zip then you also need the ssl84d bootloader. Latest Secondstage Bootloader For DM800 Clone Sim 2.01 Put the receiver in flash mode, open a browser window and flash the bootloader, don`t reboot, open another browser window and flash the image, now reboot.

(Quote from alimac) please can i get a link to this image? I have sim 2 ssld4d. i want to know, how different is sim 2 and sim 2.10. and sim is located on dm800se mobo right

find whatever simcard & bootloader you have a good starting point example sim 2.10 bootloader 84 pli 6.0 gistroom image works fine latest bootloader for image important

Follow this guide -> DM800 Flashing firmware by Browser DM800 & 800 se are flashed the same way. Flash the bootloader first, don`t reboot, open another browser window and flash the image, now reboot.

The image used is ancient, so you might not have a compatible bootloader.. Flash the bootloader first, don`t reboot yet, then flash the image. DM800se sim2 84d bootloader Try flashing with this -> Dreambox OptiFlasher Pro Ultimate EDition v2.0.0.9

I had a similar experience with a HD combo version a good while back. I had to write an old sw/bootloader to it first, then write the new sw in order to get rid of bootloader mismatch. I can't remember which sw it was though, if I come across it later, I'll post it up.

hi guys i have an amiko micro hd se box i accidentally updated my box with just sw and not sw+bootloader when trying to add xtream tv to it. now every time i try to update it i get the error bootloader mismatch. any ideas on how to fix this issue so i can load xtream iptv on to my box. or shall i just get a new box. cheers

unfortunately not yet i am still in need of a little help for this last bit. come on guys we only need someone who has knowledge of basic firmware and bootloader methods. im sure the guys who make firmwares for the zgemma and vu series mainly would have enough knowledge.

…is is a call for help if anything. Basically im calling on anyone that has created custom firmwares for vu boxes, zgemma boxes etc or even anyone that knows about compiling custom firmwares to help get this last piece to fit. we need to get the bootloader modified or a bin file created from the actual sky open source firmware to put this final nail in the coffin. If you can help at all or think you know anyone that can help please inbox me as soon as possible. the end is very near now and once w…

mostly if do a install with 0 modemkabel i do the bootloader first , then the needed software, then again the bootloader, this image is real good , dis miss only the ccam. thanks . I tell it cos see so manny times NO CA FOUND, when like this i avoid it , just be sure to use the right image, reak good site here. greetings Schapi

have your tried turning it off at the wall for 30 minutes before you start faffing. Then try flashing a new image or bootloader. It works sometimes, especially as some of these have dodgy power packs.