Search Results

(Quote from Hannibal_Lecter) Hi. Can you help me please. It must install this plugin" enigma2-plugin-settings-icam-sky-hd+-orf_07.10_all.ipk" in the first. Or just put Icam settings in the box. And where i should put the oscam server(etc/tuxbox/config/oscam emu) or in other folder?

iCam uses streamrelay (it takes control of Tuner), so the protocol icam is normally blocking the tuner... if you don't want it to happen, don't use iCam channels. You need to understand that any provider you watch that is going thru iCam, will give you the same behavior, and any SoftCam that emulates iCam as well. TS

(Quote from toysoft) Hey, just tried NCAM and still the same shows, but it shows the image right after, but the message still appears?

(Quote from johnvucz) It's normal behavior if you use iCam, if you don't want to see this, don't use iCam, TS

hi, DE works with icam streamrelay and I don't know if this software supports it... find out how and what the software needs, it should be updated. post SKY DE ICam - ORF - HD+ Enigma2 Settings by Lippei

(Quote from Hans66) wieso braucht man bei einem OpenATV7.3 eine extra icam Senderliste - mach einfach einen Sendersuchlauf leg dir deine Bouquets mit den Sendern die du brauchst an unnd nutze die Funnktion über die Menü Taste wenn du in deiner Bouquet Übersicht bist unnd füge das Bouquet den sogenannten Streamrelay zu MfG

(Quote from kitte888) Beide getestet openatv 7.4 ja deine Beides icam und whitlist rtl und so ein mist schaue ich nicht

…m-git11763-801@e1d2fb78-openpli40-webif-dvbapi-ssl-libdvbcsa-emu801-icam = PY3.10 oscam-git11763-801@e1d2fb78-osmio4k-webif-dvbapi-ssl-libdvbcsa-emu801-icam = PY3.10 oscam-git11763-801@e1d2fb78-sh4_generic-webif-dvbapi-ssl-libdvbcsa-emu801-icam = PY3.21 oscam-git11763-801@e1d2fb78-sh4-webif-dvbapi-ssl-libdvbcsa-emu801-icam = PY3.9 oscam-git11763-801@e1d2fb78-sh_4-webif-dvbapi-ssl-libdvbcsa-emu801-icam = PY2 oscam-git11763-801@e1d2fb78-vuplus4k_arm-webif-dvbapi-ssl-libdvbcsa-emu801-icam…

(Quote from jenseneverest) Yes, I think this is the first one that works on icam 28.2 other than samur's. Great work, thanks. Only Bulcrypt on 39E doesn't work, but it didn't work with previous version (11759) either since a few days - I think they changed system, there's ecm but doesn't clear.

(Quote from Warder) I would just like to write that streamrelay works great with your configuration. No picture freezes and all channels in Skyde work.Installed version 11748 by samur, Openatv 7.3 DM800SE. Thank you. (Code, 4 lines)

Hi Samur, I've been using your oscam build for a while from icam thread - r11718-798 and Sky De works OK. - OSCam-ICam For SKY IT, UK, DE Switched to your build of OSCam-11759-801 this morning and Sky De does not work. -Samur - OSCam For sf8008 and others [ boxes_Arch:arm ] Am I missing something? Running latest Vix on Vu Solo 4k. Oscam.JPG Thanks,

(Quote from Chris230291) With Stream Relay, there is NO other option with Enigma2 as the box drivers do not support icam.

…e from jenseneverest) It's about time. These closed-source-special builds need to die! I don't see any reason not to use NCAM if you can. It's OSCAM with extra emu features, which will never make their way into OSCAM because they don't want to support emu. It does everything OSCAM + emu does and more. Fairbird has done a fantastic job. EDIT: TVH was updated to support iCAM, so patching is no longer required. It automatically detects iCAM support in libdvbcsa and enables iCAM…

Guten Morgen, Bin neu hier und ich hoffe es kann mir jemand helfen, ich finde im moment nichts ich suche eine neue Sky-De icam und eine Sky-IT icam Senderliste für mein VU+ Zero 4K - OTV 7.3 vieleicht kann einer mir helfen würde mich freuen?????? Viele Grüße

…B is single sat tuner - Gigiblue Trio 4k - with Open Pli 9.0 Also got same problem on VU+ Zero 4k with Open Pli 9.0 2. Am not sure where is that option. I can enable/disable stream relay from the Oscam web interface 3. Sat channels are scanned manually. Icam bouquet is provided from the service provider. But Problem is on the sat channels not the Icam…

(Quote from moonwalker) You have something wrong there. So we are on the same page..... 1. is you STB a single tuner - what STB ? 2. Are you using the latest images that have the options to enable / disable stream relay channels ? 3. How are you making your TV bouquets ?

I have a problem while Stream relay is enabled for 0960 that I cant watch the channels directly (not through Icam list). For example Discovery channel (sd) still works directly on sat but if stream relay is enabled it decodes but no picture. Discovery channel icam then works ok. Is there a setting to get both channels working ?

(Quote from gigamini) These are not encrypted... just FTA... so something like... #SERVICE 5002:0:0:0:0:0:0:0:0:0:https%3a//domain.cdn.site.com/link/index.mpd&0=5&1=1&5=kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk:ShowMeTV #DESCRIPTION ShowMeTV and about streamrelay/iCam I am talking about not the nasty way with http lines in the channellist (that get a lot of greenscreens to users), and libdvbcsa built-in the oscam, but into the image. We are talking about an image here, not plugins. TS

(Quote from toysoft) icam streamrelay libdvbcsa cak7 ... all in oscam / oscam-emu https://repo.or.cz/oscam.git/c…057d52bdd4462dad041a181ed - Menu - Setup - Softcam / CI - Stream Relay Settings - Open ch.list - Menu button - Play service with Stream Relay GStreamer DASH FFmpeg DASH Streamlink DASH

Two options you can download a icam channel list, I use vhannable rotating icam list found it the levi45 addon or try going into the channel list highlight the channel you want to watch, press menu and go to extras and select play with steam relay. Wait a few seconds and see if it clears. I have found its hit and miss dependent of each image. It will also depend on your server.