Not necessarily ATV and bh. I want it to work mgcamd. How images upload?
Mgcamd For arm based receivers
-
- ARM
- levi45
- Thread is marked as Resolved.
-
-
PurE2 has everything in the feeds...
-
I do not know purE2.
-
But you could...
-
On purE2 mgcamd works without a problem? The channels are loaded. You can provide a link to purE2 image under vu + uno 4k se and immediately after mgcamd plugin?
-
Search a bit, even on this forum, it's all here, just waiting to be discovered... ;)
-
Ok thx friend
-
Work work : czas na imprezę:: czas na imprezę:: czas na imprezę:: czas na imprezę: thx. Only no full polish Language image.
-
If you have the time you could improve on that, m8... :)
-
is it possible to get mgcam to run on openatv 6.3 arm processor
-
is it possible to get mgcam to run on openatv 6.3 arm processor
i have mgcamd running on zgemma h7c openvix so it should work on openatv
-
i have mgcamd running on zgemma h7c openvix so it should work on openatv
Do you have the mgcamd file from vix /usr/bin
-
i have mgcamd running on zgemma h7c openvix so it should work on openatv
Do you have the mgcamd file from vix /usr/bin
enigma2-plugin-cams-mgcamd.1.35a_1.0-r3_cortexa15hf-neon-vfpv4.ipk
is the one im using on openvix im sure its on here somewhere..
-
enigma2-plugin-cams-mgcamd.1.35a_1.0-r3_cortexa15hf-neon-vfpv4.ipk
works ok on openvix latest for me
-
found this on a german forum
got it working on openATV zero4k
i did not install with the ipk
i unpacked the ipk with 7zip
sent the bin to /usr/bin
the config files to /usr/keys
and just used telnet with this command
ln -s /lib/ld-linux-armhf.so.3 /lib/ld-linux.so.3
and the openATV start script in etc
mgcamd_135a.emu
with this inside
emuname = mgcamd_1.35a
binname = mgcamd_1.35a
startcam = /usr/bin/mgcamd_1.35a
stopcam = killall -9 mgcamd_1.35a
if you follow what is is said above you will get it working on
openATV VU+ Zero4K
nothing more to be said
-
and the openATV start script in etc
mgcamd_135a.emu
with this inside
emuname = mgcamd_1.35abinname = mgcamd_1.35a
startcam = /usr/bin/mgcamd_1.35a
stopcam = killall -9 mgcamd_1.35a
this is the part i don't get... can you shed a light on this please? thanks
-
-
Thanks mate i will try it and get back to you
-
Has anyone managed to get mgcamd working on Zgemma H9T Pure2? I have installed the plugin and copied the newcamd.list file to usr\keys and tried to start the mgcamd_135 but nothing happens.
-
What for? You have CS for terrestrial TV? Where? (Just curious...)
I pulled the MGcamD.arm from our feed, the config files come with it to /usr/keys (for those who do not know this...)
cccamd.list (one must rename the file and delete .example, of course) > put your C lines in there and restart E2, then start MGcamD from pManager and it works with DVB-S2, on H9.2H - just tested.
newcamd.list wouldn't work, for some reason, sorry, must investigate...
MGCamd Support Forum
Configs, discussion, downloads and guides for MGCamd Softcam.
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!