thanks bro...
i use your tvheadend on my wetek play 2 and bbc earth channel on measat 3 finally have a sound...
good job..:thumbup::thumbup:
thanks bro...
i use your tvheadend on my wetek play 2 and bbc earth channel on measat 3 finally have a sound...
good job..:thumbup::thumbup:
Second Way .
Please Only tvheadend Excute File to Overwrite
(Base - Last 90117)
So you only attach execute file
Yes .. Only tvheadend Excute File .
but the new tvheadend can not mapping encrypted channels...;(;(;(;(
First Time - Old Tvheadend Run by Channel to Mapping
and after Only New 90118 Tvheadend Excute File to Overwrite..
"My /storage/.kodi/userdata/addon-data/service.tvheadend42 form Old Tvheadend Ver 90113"
tvheadend new Version is Automatically Recognized to User Channel Data from Old Version
so,can you explain how to do maping on encrypted channel successfully by using your tvheadend????
First - i overwrite tvheadend excute file with your tvheadend 90118 and when i enable, tvheadend running normally
Second - i change back to my old tvheadend version excute file so i can mapping encrypted channels
Third - when i enable, tvheadend not running again
any solution???
Now I am test 90118
Map encrypted services is OK
What is Your Box ??
and check to "Map encrypted services:"
Old My Story ( I Was Speak)
1. Tvheadend 90113 Normal Install and Run Satellite data Setup and Channel Scan(Complete)
2. Back up Userdata only
3. Tvheadend Disable
4. Tvheadend 90116 addon copy to box
5. Tvheadend enable
6. after 90117,90118 Excute Copy to Box
That's all
Display MoreNow I am test 90118
Map encrypted services is OK
What is Your Box ??
and check to "Map encrypted services:"
Old My Story ( I Was Speak)
1. Tvheadend 90113 Normal Install and Run Satellite data Setup and Channel Scan(Complete)
2. Back up Userdata only
3. Tvheadend Disable
4. Tvheadend 90116 addon copy to box
5. Tvheadend enable
6. after 90117,90118 Excute Copy to Box
That's all
i use Wetek Play 2 and HTS Tvheadend 4.2.4-23 ~ LibreELEC Tvh-addon v9.0.5.113
OS LibreELEC rb-leia21 9.0
when mapping i always check "Map encrypted service"
can you test map 3760 V 29700 on measat 3 (91.5°E)??
when i map this Frequency i got ignore status and i use your tvheadend.
with my tvheadend no problem and success mapping..
thanks for your information..
same problem :
Today Tvheadend 90118 Test to Measat-3 3760 TP
Map service is Normal-No Error
I have Same error from Intelsat-20(68.5E) 3740 TP
and Now Fix with Change to Character Set ISO 8859-1 from auto
Libreelec - Settings - Interface - Regional
Language - English
Different Interface Language setting is Not Goodway ..
Please Select to another Character Set and ReRun Again ..(Network/Mux)
Many Map error form Different Language and Character Set
Goodday !!!
how can i change 'Now Fix with Change to Character Set ISO 8859-1 from auto'
please help
i try set following your instruction (sreenshot) and muxes and then go to services tab but on services tab channels not showing.. Except i change hide to none.. when hide set to parent disabled (default) channels not showing.. and finally map got ignored status all channels 3760 V 29700 measat 3.
Hi You Going to Tvheadend Menu
Configuration - Channel /EPG
Click to Add - Add Channel Box
Manual Input to 3760 tp Channel One by One
after Find to Channel List
and Click It One or One and Tell me ..
*** 3760 Channel is Already on List
Just Check It(Enable Section) and Save ***
i try with your instruction.. map not prosess
Not to run Mapping
Just Find to Channel List
Like Pic
Your Channel on Channel/EPG List .. Don't Need Mapping
Just Find to Channel List(Like Pic)
yes you're right.. CI HD channel now on the list of my Wetek Play 2 box.. but when i select CI HD nothing happened.. channel not working or responsed.. If i change to BBC EARTH channel it is OK..
CI HD Channel on Libreelec
"No any Error Massage by No Responsed"
You Need Oscam.server file with Cacheex=1
But Another Normal Channel is some Error form Cacheex=1 Line
Please Make Different Reader to Oscam.server Line
and Control by Sid on Oscam.services File
Couple of Channel by Measat-3/3A
Need to Oscam.server with Cacheex=1
"Dm-800HD on No Audio Error"
"Libreelec on No PIC/Audio Error"
Please Make Different Reader on Oscam.server Like This
My Oscam.server
[reader]
label = AFN
protocol = emu
device = emulator
caid = 0E00
detect = cd
group = 1
emmcache = 2,2,2,0
emu_auproviders = 0E00:000000
auprovid = 000E00
cacheex = 1
cacheex_maxhop = 1
cacheex_allow_request = 1
services = afn
and Oscam.services
[afn]
caid = 0E00
provid = 000000
srvid = 0194
Oscar.services File Edit to oscam webinfo
Insert new SID and Save / No Need Restart
or Delete old Sid and save
woww... many thanks bro...
i really appreciate your help :):):):thumbup::thumbup::thumbup:
. Attachments file = ncam4.1 arm Rename to oscam.
can u upload ncam 4.2 latest version here plz
Display MoreHi You Going to Tvheadend Menu
Configuration - Channel /EPG
Click to Add - Add Channel Box
Manual Input to 3760 tp Channel One by One
after Find to Channel List
and Click It One or One and Tell me ..
*** 3760 Channel is Already on List
Just Check It(Enable Section) and Save ***
Hi hisakatano, can you backup your Tvheadend setting and share it for me? Which like this https://freetoairamerica.wordp…om-one-system-to-another/
Thank you.
Don’t have an account yet? Register yourself now and be a part of our community!