ncam is same as oscam but maybe for u card is good
meo 30w oscam config
- hs5424
- Thread is marked as Resolved.
-
-
caid = 1814,0100
detect = cd
mhz = 534
cardmhz = 369
ident = 0100:005211,005221,005225;1814:005211,005221,005225,000001,000002,000003,000004,000005,000006,000007,000008,000009
group = 3
emmcache = 1,3,2,0
lb_weight = 500
dropbadcws = 1
For card meo this config is ok
I: 1814 ;
P: 0100:005221 ; MEO PT DHT (30W)
P: 0100:005225 ; MEO RFU
P: 0100:005211 ; MEO (30W)
and this in oscam.dvbapi
-
Thanks jafosses,
I am using a debian pc as my server. My oscam configs look similar to yours, however I was advised that I don't need oscam.dvbapi on my server.
Also don't know what P: xxxx, is.
-
-
HI P :
Priority ,this config is from my raspberry
Ok. So do you think I need it on my debian.
-
[reader]
label = MIAU
protocol = smargo
device = /dev/ttyUSB0
fallback = 1
services = (os teus)
lb_whitelist_services = (os teus)
caid = 0100,1814
detect = cd
mhz = 540
cardmhz = 2700
ident = 0100:005221,005211,005225;1814:005211,005221,00522 5,000000,000007
group = 1
emmcache = 1,3,2,0
ecmwhitelist = 0100@005221:64,69
lb_weight = 300And this on oscam.dvbapi ,and work
#M: 1814 0100:005221
#------------------------------------------------------------------------------#
#
I: 1814 ;
P: 0100:005221 ; MEO PT DHT (30W)
P: 0100:005225 ; MEO RFU
P: 0100:005211 ; MEO (30W)
P: 1802 ;
P: 1802:004801 ;
P: 1802:004901 ; ZonTV/Cabo (30.0W)
M: 1814 0100:005221,000007,000000
#
#------------------------------------------------------------------------------#
-
Hi All,
I decided to return to this problem as I have some spare time at the moment and would like to know the reason why I cannot run the 1814 meo in oscam and share in cccam. My new approach is as follows.
I setup oscam in a linux satellite stb and played around with the configs and managed to get it working with all channels opening on my pack. I now know that the oscam is running the card ok. I then transferred the configs to my Ubuntu server and put the card in my omnikey , set the protocol for pcsc etc and the reader is seeing the card and entitlements etc ok. I setup an N line in my cccam,cfg and a user for this in my oscam. I can see using the oscam web IF that the cccam is connected to oscam but that as far as it goes. No pics. I think that my problem is the transfer between oscam and cccam although they show as connected.
Any ideas.
-
hi if is the same house
n: ip the umbutu server port user pass .......
in oscam cfg open the port with the caid
-
Hi Jokosat,
If it's in a remote house ???.
Forgot to mention , this id what the live oscam log says when I am trying to access a meo channel,#
cccam (1814&000100/0000/057A/69:00000000000000000000000000000000): rejected group (0 ms) (invalid user group cccam)
-
check the group in oscan cfg and oscam user if is the same ??invalid user group cccam)
-
same group. Group 1.
different configs and now am getting,
c cccam (0100&005211/0000/0579/69:00000000000000000000000000000000): rejected user ident (0 ms) (no card support 0100:005211)
Just a thought,
Do I need the option ' reshare = 1' in my config's.
-
Now have the card working ok in alien box with the following reader and user configs. I send an N line to my cccam which appears as connected to oscam and displays the channel name that my client box is trying to view but I only get sport tv 1 HD for example using cccam which is very hit and miss. Maybe there is something in my cccam.cfg that I need to change. I no longer am running a local card in my cccam so I have ## out the card boxkey and pin. I feel like I am very close.
[reader]
label = MeoP
description = meo
protocol = internal
device = /dev/sci0
caid = 0100,1814
detect = cd
nagra_read = 1
mhz = 500
ident = 0100:005211,005221,005225,000000,000001,000002,000003,000004,000005,000006,000007,000008,000009;1814:025211,025221,025225,000000,000001,000002,000003,000004,000005,000006,000007,000008,000009
group = 1
emmcache = 1,3,2,0
[account]
user = meo
pwd = meo
caid = 1814:0100
uniq = 3
group = 1
ident = 1814:005211,005221,005225,000000,000007;0100:005211,005221,005225,000000
keepalive = 1
-
if u need help not prob
-
Thanks bud.
What do you thing of my configs. Do you need to see my cccam.cfg.
-
i think is ok but i play with amiko alien this morning with my card fransat and i get only one channel in same ip ??? with my other box not prob ???
-
That's interesting. Maybe I have two problems. The alien could be leading me down the wrong path.
-
i send u message at w......
-
-
Hi All,
UPDATE.
I installed Ncam 1.1 in the alien which runs the card perfectly. I now am trying to share Meo 1814 from the alien to my bedroom using oscam, however I get pictures for about 20 seconds or so and then zero. This is when I run Mgcam in the bedroom, oscam on client box gives no picture at all. Almost there.
-
hi if u want i can try to help u via team vieuwer ????so i can see wat is wrong ??
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!