PowerVU issue with Oscam-emu

There are 42 replies in this Thread which was already clicked 12,030 times. The last Post () by achintha.

    This is not ipk-package. This is Oscam binary. You need to put It on /var/bin/ folder and to put Softcam.key file on /var/tuxbox/config/ folder.

    After this You need to enter Oscam app (plugin) on your STB and to choose new Oscam binary with remote control unit on Plugins tab.

    Restart Oscam or STB.

    That's all.

    • Try oscam-svn11398-sh4-emu766 not work MTN Sport24 57e powervu bro
    • 2018/01/22 08:01:29 14C8A2CD c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    • 2018/01/22 08:01:31 14C8A2CD c (ecm) root (0E00@000000/0000/006D/48:6C44EBB1D770754E363CF56D4D9E846A): rejected group (1 ms) - Sports 24 (no matching reader)
    • 2018/01/22 08:01:32 14C8A2CD c (ecm) root (0E00@000000/0000/006D/48:47E65E94BDBD7CEF3AD639D305B12691): rejected group (1 ms) - Sports 24 (no matching reader)
    • 2018/01/22 08:01:32 14C8A2CD c (dvbapi) Demuxer 0 restarting decodingrequests after 2 ms with 1 enabled and 0 disabled ecmpids!
    • 2018/01/22 08:01:32 14C8A2CD c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921

    Edited once, last by meong ().

    Quote from meong
    • Try oscam-svn11398-sh4-emu766 not work MTN Sport24 57e powervu bro
    • 2018/01/22 08:01:29 14C8A2CD c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921
    • 2018/01/22 08:01:31 14C8A2CD c (ecm) root (0E00@000000/0000/006D/48:6C44EBB1D770754E363CF56D4D9E846A): rejected group (1 ms) - Sports 24 (no matching reader)
    • 2018/01/22 08:01:32 14C8A2CD c (ecm) root (0E00@000000/0000/006D/48:47E65E94BDBD7CEF3AD639D305B12691): rejected group (1 ms) - Sports 24 (no matching reader)
    • 2018/01/22 08:01:32 14C8A2CD c (dvbapi) Demuxer 0 restarting decodingrequests after 2 ms with 1 enabled and 0 disabled ecmpids!
    • 2018/01/22 08:01:32 14C8A2CD c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 0E00 PROVID 000000 ECMPID 1779 ANY CHID PMTPID 1920 VPID 1921

    "rejected group (1 ms) - xxxxxxx (no matching reader)"


    is a bit like the "dreaded" BSOD/Blue Screen of Death/STOP ERROR in older versions of Windows...

    ...it doesn't always point you in the right direction


    As I've found in the past, it can mean something as simple as having the the wrong key(s) in the SoftCam.Key file.


    If that's your issue, this should confirm & resolve:


    See the attached file "MTN_22-1-18.txt"

    It contains SoftCam.Key entries for MTN 57°E, 20°W, 34.5°W & 177°W

    [they were working last night; were still OK as of 12:15 UTC 22-1-18, when the drifting/inclined-orbit of NSS7 @20W re-entered the path of my fixed dish; & still OK @22:15, when it moved out of focus]


    Just

    Remove/Delete ALL parts that relate to MTN from the SoftCam.Key file that's on your box.

    Then add the entire contents of the attached "MTN_22-1-18.txt" file onto the end of it.

    Save the changes & Restart OSCam-EMU.


    >>>>>>>>>>>>>>>>>>>>>>

    Step-By-Step for Newbies:

    1.

    Tune your box to an MTN channel

    2.

    Use your FTP Client (I use FileZilla) to backup the full SoftCam.Key file that's on your box, to your PC

    3.

    Right-click on the SoftCam.Key file that's on your box

    & choose view/edit

    4.

    Carefully highlight & Remove/Delete ALL sections of that SoftCam.Key file that relate to MTN 57E & 20W.

    5.

    Now Copy the entire contents of the attached "MTN_22-1-18.txt" file,

    & Paste it onto the end of the open SoftCam.Key file.

    6.

    Save the changes

    7.

    Save again, as requested

    8.

    Restart oscam-emu, by either of these two ways:

    a > Using the RCU

    [the following is correct for my image Wooshbuild/OpenATV6.1, others will differ]

    Press the BLUE Button on the RCU (to open the "Quick Launch" Menu)

    Scroll down to "Softcam" & press OK

    Press OK again, the "Softcam Panel" opens

    Where you see: "Select Cam 1" ensure OSCam EMU is selected

    Click the GREEN Button - OSCam will Restart

    If it restarts you will see "active CAM1:OSCam.EMU xxx" lower down in the Softcam Panel

    Press EXIT a few times


    b > Using OScam WebIf

    Open the Web Interface in your Browser

    [the address looks something like this "http://192.168.xxx.xxx:8888/"]

    Click-on "Restart" in the top right corner

    Click-on the "Restart" button, near the centre of the page

    Click-on the OK button, in the message that pops up


    Important:

    Sometimes/often the EMU will fail to start the first time;

    If that happens you will have to use the RCU method to restart it

    [as the OSCam Web Interface is now OFF at the STB end - so you won't be able to connect]

    The OSCam-EMU usually doesn't fail to start on the second attempt.

    <<<<<<<<<<<<<<<<<<<<<<

    Quote from theGarsun

    Ok..thanks i will try

    There is a strange problem regarding decoding of audio for channels. On few channels there is no audio on first option from the first list of audios avaiable. When I change audio to 2nd selection of audio list than there is the audio. But for channels which broadcasted with single audio source I am not able to receive any audio. Plz help to resolve this.


    Oscam Server conf is as following


    [reader]

    label = oscam.constant.cw

    protocol = constcw

    device = /etc/tuxbox/config/oscam.constant.cw

    caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1

    ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000

    group = 1


    [reader]

    label = emulator

    protocol = emu

    device = emulator

    cacheex_maxhop = 1

    cacheex_allow_request = 1

    caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010,0D00,0D02

    detect = cd

    ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

    group = 1

    emmcache = 2,2,2,0

    emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000

    Quote from asimaslam

    There is a strange problem regarding decoding of audio for channels. On few channels there is no audio on first option from the first list of audios avaiable. When I change audio to 2nd selection of audio list than there is the audio. But for channels which broadcasted with single audio source I am not able to receive any audio. Plz help to resolve this.

    It's possible that the Audio related Defaults in your image are set to choose options that your set up cannot handle or handle correctly?


    Though that wouldn't explain:

    "for channels which broadcasted with single audio source I am not able to receive any audio"


    Anyhow

    Try making adjustments in "Auto language selection";

    changes will be implemented globally.


    The most direct way to get to these settings on my Zgemma with Wooshbuild/OpenATV_v6.1 is:


    Press the AUDIO button on the RCU - a menu opens entitled "Select audio track"

    Press the MENU button on the RCU - a menu opens entitled "Auto language selection"


    [The longer way: Press MENU button, then choose: Setup > Audio > Auto language selection]


    +++++++++++++++++++++++++++++++++++++++++++++++

    Initially try this:

    Set Both "Prefer AC3 track" & "Prefer AC3+ track" to > NO <

    Then press the GREEN button - to save changes.

    This may restore audio to most channels?

    Flick to a few channels and see.

    +++++++++++++++++++++++++++++++++++++++++++++++


    I prefer to leave both set to > YES <


    1.

    Whatever happens, I would advise you to make this important change:

    Look for "Prefer audio track stored by service"; & change it/set it to > YES <

    That will ensure any audio track selection changes you make on individual channels in the future will be remembered (not lost on a reboot)


    2.

    I leave "Prefer AC3" set to YES [because AC3 (essentially Dolby Digital) Audio is preferable to MPEG, even if you don't have a surround-sound system]

    > BBC & ITV @28E use it.

    Some channels/providers implement it in a way that my STB cannot handle correctly;

    SIS Live @4.8E for instance.

    Initially I had no audio on SIS channels. To fix this, I chose to manually change them one-by-one to MPEG.

    If I had set "Prefer AC3" to NO, I would have sound back on SIS chans, without having to make individual adjustments; BUT this would force ALL channels on the STB to use an MPEG Codec, ignoring the better quality AC3.


    3.

    I also set "Prefer AC3+ track"; to > YES < [AC3+ is essentially Dolby Digital Plus]

    Some channels only offer either MPEG or AC3+ (i.e. no AC3)

    Hi theGarsun

    Thanks for your effort and simplified guidance on powervu MTN. I have done everything as guided copying and pasting after deleting old keys in the softcam.key on my uno4kse with OBH image but blank screen no show. Oscam.emu gives or shows this message

    Caid: 0x0E00

    PID:0X1779

    PRO:0X000000

    CHID:0X0000

    Reader: emulator

    FromLlocal

    Protocol:emu

    Hops:0

    Ecm time:1


    what could be the problem? it shows that the keys are not working. Where is the configuration problem???

    I tired all this but nothing has been changed. I am using open blackhole 4.1 on duo2. The server config I shared earlier if I add AFN setting by adding these

    "

    [reader]

    label = AFN

    description = AFN-EMU

    protocol = emu

    device = Emulator

    caid = 0E00

    detect = cd

    group = 1

    emmcache = 1,5,31,1

    emu_auproviders = 0E00:000000

    auprovid = 000E00

    cacheex = 1

    cacheex_maxhop = 1

    cacheex_allow_request = 1

    services = afn"


    I got the audio and AFN video but than there is no audio & video for MTN package. In oscam log file I see that it has picked the key for MTN and it has been decoded.


    Than I done another experiment to the obove highlighed cacheex = 0 than AFN video will turn black & audio problem also starts but now I can watch MTN package. I am unable to uderstand what is happening. If some how cacheex work for both values 0 & 1 this problem could be resolved. I tried by putting the values as

    cacheex = 0,1

    or

    cacheex = 1,0

    it picks first value.


    Now if you can help me. Thanks,


    My oscam config is as following & it worked for autoroll:


    [global]

    logfile = /tmp/oscam.log

    clienttimeout = 3500

    nice = -1

    preferlocalcards = 1

    block_same_ip = 0

    block_same_name = 0


    [cache]


    [streamrelay]

    stream_relay_enabled = 0


    [dvbapi]

    enabled = 1

    au = 1

    pmt_mode = 0

    delayer = 60

    ecminfo_type = 1

    user = linuxsatsupport

    read_sdt = 1

    write_sdt_prov = 1

    extended_cw_api = 1

    boxtype = dreambox


    [webif]

    httpport = 8888

    httptpl = /etc/tuxbox/config/tpl/

    httprefresh = 30

    httpshowmeminfo = 1

    httpshowuserinfo = 1

    httpshowcacheexinfo = 1

    httpshowecminfo = 1

    httpshowloadinfo = 1

    httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1

    http_status_log = 1

OSCam-EMU Support Forum

Configs, discussion, downloads and guides for OSCam-EMU Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login