yes, it do not decode, but in debug level2 it will show us a few more info about the error (what it is searching for, and not find...)
PowerVU config files for oscam-emu
-
- OSCam-EMU Configs
- .:T3O:.
- Thread is marked as Resolved.
-
-
Do not understand why in mohamed's oscam.server, emmcache = 2,2,2,0 is set like this !!!!
it doesn't work, but audi's file is set to 2,1,2,1, and works.
here it is:
[reader]
label = emulator
enable = 1
protocol = emu
device = emulator
device = https://raw.githubusercontent.com/MOHAMED19OS/SoftCam_Emu/main/Enigma2/SoftCam.Key
caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1
detect = cd
ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE
group = 5
emmcache = 2,2,2,0
emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE
-
For me with this simple reader, AU runs fine with me;
The Config is only for PowerVu Channels Not included other systems:
you should to set the correct value for the parameter: " pmt_mode = x " In oscam.conf ;
x = 1,2,3,4,5 or 6 ;
;
-
Display More
For me with this simple reader, AU runs fine with me;
The Config is only for PowerVu Channels Not included other systems:
you should to set the correct value for the parameter: " pmt_mode = x " In oscam.conf ;
x = 1,2,3,4,5 or 6 ;
;
yours is even more confusing: emmcache = 2,2,0,0 !!!!!
-
I apologize but anybody can tell me why I can't open sky German with oscam 11517??? Should I use another emu or sky has changed anything???
-
The AU takes 5 minutes to get the new keys with my confusing :emmcache = 2,2,0,0 ;
;
-
Display More
The AU takes 5 minutes to get the new keys with my confusing :emmcache = 2,2,0,0 ;
;
my emmcache = 2,1,2,1 takes seconds to clear a pv channel !!!
..and as per last config files posted, this is the oscam.server:
"
OSCam Emu Config files
Update: 06/03/2021
-
Hello. I use an SF4008 with openatv 6.5 and I would like to be able to have the chains in powervu (discovery). Currently I have a tivusat card in the reader (gold) and also captures the abertis channels. I would like not to lose anything. Can you send me the correct oscam files or explain the procedure to me? Thank you.
-
I have tried to do copy and paste about oscam config. To open powerwu but I could not to. By chance anybody of you knows how it opens sky German also??? Nowadays I think is down...or I am wrong???
-
I am trying to get OS mio 4K+ running OpenViX with oscam-emu to clear PVu channels but black screen. The oscam-emu version is 1.20_svn build r11572-798, I think I downloaded it from the OpenViX online feed then used the "Atari simple" config files from this forum?
Can anyone please send me a set of config files that will work for PVu and biss for my setup?
I have E2 softcam file and think the PVu are OK in the file but probably some type of config issue giving the black screen for PVu, biss works OK though.
Thx
-
are sonypack asiasat 7 powervu channels open on above config
-
I was shown AFN working yesterday. All channels working. Keys changing approx. every 30 minutes. It works and it's hacked. How is less important. However, I'd like to have it on my E2 box, preferably using OSCam EMU. Is it non public or only available the way I saw it? The photo below shows "The Great Unwashed" that was running on AFN Movie today at 22:17 CET today (at least if I'm to trust the EPG). It's a photo taken off the screen to show it works, not HOW it works. My question is, can it be run on E2 using OSCam EMU, or am I too early asking?
PS! If you don't believe me I can take more photos, but believe this one shold prove it. Just go to the channel or to the AFN Europe website.
-
I was shown AFN working yesterday. All channels working. Keys changing approx. every 30 minutes. It works and it's hacked. How is less important. However, I'd like to have it on my E2 box, preferably using OSCam EMU. Is it non public or only available the way I saw it? The photo below shows "The Great Unwashed" that was running on AFN Movie today at 22:17 CET today (at least if I'm to trust the EPG). It's a photo taken off the screen to show it works, not HOW it works. My question is, can it be run on E2 using OSCam EMU, or am I too early asking?
PS! If you don't believe me I can take more photos, but believe this one shold prove it. Just go to the channel or to the AFN Europe website.
your box is running iks keys from a server via internet. disconnect your box from internet & you'll have black screen on afn.
you can run it on an e2 type box the same way. there is no oscam fix for afn.
-
-
Best regards All,
Anyone with a working pv conf. for Discovery network @68east?
Hello all
It's someone having pv conf. Files for Discovery network Astra 4.8e and 0.8w Thor Working on Octagon SF8008 MINi 4K?
Image OpenATv
Thanks
-
Using oscam emu with softcam update you can watch discovery on 4.8 east. With the same emu you will need something else...
-
About Thor I mean..
-
Using oscam emu with softcam update you can watch discovery on 4.8 east. With the same emu you will need something else...
Hello
please I have the same Oscam-emu configuration files working with Dreambox 900 4k but not working on Octagon SF8008 MINi 4K?
Thanks
-
The one explanation I can tell U is you could using two different oscam but you don't know it...I can't tell you more.
Sorry.
-
If you have the rotor try positioning on 1.9 eat and try watching arena sport with both decoders...if you watch it then it's the right oscam. Otherwise one of two is another one. Good luck!
OSCam-EMU Support Forum
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!
