Latest NCam Emu for ALL IPK & sh4 spark v14.9 compiled and patched by RAED 31/03/2024

Thanks fairbird & Linuxsat - support .com Team & Admin oktus

Ncam V14.9 compiled and patched READ as at 31/03/2024

Update ...

Ncam V14.9

- More Fix for Streamrelay

Note the following

Installing the emu in the old way by uploading it to the Extension / var supply and running it by plugin alternative softcam manager Suitable for old versions only

But modern versions must Installing through ipk extension

IPK   Valid for devices spark SH4 for enigma2

In ncam.conf

pmt_mode = 0 #[ Use 6 the Best value for (opensource) images only ]

extended_cw_api = 1 #[ (1) = OE2.2/2.5 AND (2) = OE2.0 ] boxtype

= dreambox #[ For enigma2 use (dreambox) And spark and neutrino use (duckbox) ]

config_ SH4-Only for spark and neutrino

 Ncam-config-OE2.0 for enigma2

222338324.gif

Telnet link Thanks to MOHAMED_OS

python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Enigma2_Store/main/Cam_Emulator/installer.py -qO -)"

Thanks fairbird For all your wonderful work

Enjoy & Good luck

261538088.gif

NCam 8.4-sh4 Emu -r786 for sh4 spark

Ncam V 8.4

01-02-2019
-Improvements emu
-extended fix for orf global emm
-dont disable global emms or set in config blockemm-g = 0
-caid 0x0D96 & 0x0D98

ncam-8.4.sh4.zip

NCam 8.5-sh4 Emu -r787for sh4 spark

Ncam V 8.5
06-02-2019
-Improvements emu
-enhance function anticascading or SIDs count
-[streamserver] Re-zero variable for every ts packet
-[streamserver] Add missing Rosscrypt1 caid to cdata
-[nemu] New config option to control SoftCam.Key linking in binary
-Try to support SH4 device with ipk install file (With Only open source images none neutrino)

ncam.sh4.zip

NCam 8.6-sh4 Emu -r788for sh4 spark

ncam-8.6.sh4.zip

NCam 8.7-sh4 Emu -r788for sh4 spark

NCam 8.7

-New patch
-Improvements emu
-Fix Auto Update Keys
-Fix some bugs
-Update a lot of files

From this version all Config and Softcams files will be in one path and the default is etc/tuxbox/config/

ncam.sh4.zip

Dear friends, take care of the next

From this version all Config and Softcams files will be in one path and the default is etc/tuxbox/config/

NCam 8.8-sh4 Emu -for sh4 spark

NCam 8.8

-Improvements emu
-clean implementation of the card list
-(rarely used modules are set from default on to default off (no codechange just setup switch))
-fix reset to wrong defaults
-[nemu] Changed function declaration to a more clean way
-[streamserver] Improved Compel algorithm
(Picture is more stable now with minimum glitches only at key change (every ~53 seconds). The teletext pid is also descrambled now)

ncam.sh4.zip

NCam 8.9-sh4 Emu -for sh4 spark

NCam 8.9

-New patched
-Fixes some powerVU bugs
-insert hd03 and hd04 atr

ncam-8.9.sh4.rar

The best of ncam-config

ncam-config Files - 22-02-2019.rar

NCam 9.0-sh4 Emu -for sh4 spark

NCam 9.0

-[powervu] Added support for hash mode 30
-insert hd03 and hd04 atr
-[dvbapi + powervu] Properly set the descrambler mode for CSA
(When watching a DES powervu channel, switching back to CSA channels required a reboot on some receivers. Other more resilient receivers just threw an error(ioctl(CA_SET_DESCR_MODE): Invalid argument), but continued to work. This was described as a bug of these receivers, but in fact it was a bug of oscam-emu. The correct mode for the CSA algorithm is CBC and not ECB! Thanks to all who helped

ncam-9.0.sh4.rar

The best of ncam-config

ncam-config Files - 22-02-2019.rar

NCam 9.1-sh4 Emu -for sh4 spark

NCam 9.1

Improvement the emu

-[nemu] Fixed potential deadlock in powervu emm handling

(When the key DB contains no powervu keys, the powervu_get_hexserials() retuns 0 and the mutex in emu_get_pvu_emm_filter() is not released)

61d46accb4ee8.png

ncam-9.1.sh4.zip

18d82a5fb.png

NCam 9.2-sh4 Emu -for sh4 spark

Ncam V 9.2
05-03-2019
-Improvement the emu
-Fixes detecte reader and file-keys of constant.cw
-[powervu] Added support for various hash modes (This includes hash modes 0, 0x0B, 0x0C, 0x0D, 0x0E and greater than 0x27)

9.2 ncam.sh4.zip

NCam 9.3-sh4 Emu -for sh4 spark

Ncam V 9.3
09-03-2019

-[powervu] Added support for hash mode 31

9.3 Ncam.sh4.zip

Ncam config Files _ SH4.zip

NCam 9.4-sh4 Emu -for sh4 spark

Ncam V 9.4
21-03-2019

-[ncam] Better solution for setting CBC mode for CSA
(Instead of hard coding the algo mode in the dvbapi_write_cw(), we now initialize the er->cw_ex variable with the proper value)
-Simpler code for the EXTENDED_CW struct
-[ncam] Renamed caid_is_biss_static() to caid_is_biss_fixed()

ncam.sh4-9.rar

NCam 9.5-sh4 Emu -for sh4 spark

Ncam V 9.5
2-04-2019

-[powervu] Added support for hash mode 32
-[director] Fixed cw checksum bytes for nano EE
-[DVBAPI] 128 bit keys

ncam.sh4-9.5.zip

NCam 9.6-sh4 Emu -for sh4 spark

Ncam V 9.6
5-04-2019

-[powervu] Added support for modeCW 4 and modeUnmask 4

ncam-9.6.sh4.rar

NCam 9.7-sh4 Emu -for sh4 spark

Ncam V 9.7
7-04-2019

-Rework on dvbapi to incrase the amount of descramblers
-Support for DVB-CISSA scrambling algorithm and 16 byte CWs

Get available descramblers in box and BISS2 related changes

* Instead of using a predefined number of descramblers (16 until now), oscam now gets the exact number of available descramblers in box.
* Skip cw checks for BISS2, similar to what is done for BISS1. BISS2 uses 16 byte cw, so some checks need to be skipped.
* Cosmetic changes including code refactoring, variable renaming and comment addition to several places.

ncam-9.7.sh4.rar