Phoenix Smartmouse card reader error

thanks a lot, i got it working ,

that exclamation point is magic

thanks again

the system that is working on is a raspberry pi 1B with raspbian lite legacy Buster headless installed on a 4gb card

oscam is installed with simplebuild 3 by Gorgone

and i do not know if is mentioned , the switches on the reader must be set to phoenix and 5.0v

and here is my working basic config for caid 1880:

[reader]

label = Digi

protocol = mouse

device = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_your serial-if00-port0 ##mine serial is AL016WGU, look at my scan usb##

detect = !cd

mhz = 368

group = 1

boxkey = your boxkey

rsakey = your rsakey

On raspi or armbian enter ls /dev/serial/*/* and you will get a list with your device identification.

root@zero:~# ls /dev/serial/*/*

/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A100N0DB-if00-port0

/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A105BTTA-if00-port0

/dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A7031XJZ-if00-port0

/dev/serial/by-path/platform-sunxi-ohci.2-usb-0:1:1.0-port0

/dev/serial/by-path/platform-sunxi-ohci.3-usb-0:1:1.0-port0

/dev/serial/by-path/platform-sunxi-ohci.4-usb-0:1.4:1.0-port0

root@zero:~#

You can use any of these results and it will never change.