some fixes:
> Improvement of ICAM-StreamRelay for almost all devices.
(Icam is running better, most time with zapping there is a picture immediately.)
> freezing image on some channels like: Sky Sport F1 HD (19°E).
> phenomenon crashes of oscam with IPv6.
> Fixed bug with 64 bits Devices like: DM ONE/TWO/SEVEN, Ubuntu/Debian X86_64,...etc
###
> Add "Russkiy Mir" Emu Support 56°E.
[reader]
label = softcam
protocol = emu
device = emulator
caid = 0D00,0D02,0500,0E00,090F,1801,0604,2600,FFFF,4AE1,1010,44A0
detect = cd
group = 1
emmcache = 2,2,0,0
emu_auproviders = 0E00:000000;2600:000000;44A0:000000
Notes:
making your smartcard working you will need k1 key like with Sky DE.
########################################
## reader configuration
########################################
label = Sky_xx
protocol = smargo
device = /dev/ttyUSB1
caid = xxxx
boxid = xxxxxxxx
ins7e = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ins7e11 = 15
k1_unique = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
detect = cd
mhz = 600
cardmhz = 369
ident = xxxx:xxxxxx
group = 1
emmcache = 2,2,0,0
blockemm-unknown = 1
ndsversion = 2
If using radegast change:
- Include ECM in HTTP streams - YES
- Descramble HTTP streams - NO
- Descramble received HTTP streams - NO
- Load unlinked userbouquets - YES
If using dvbapi change:
- Include ECM in HTTP streams - NO
- Descramble HTTP streams - YES
- Descramble received HTTP streams - NO
- Load unlinked userbouquets - YES
To get things working with icam
1. You need a valid card or a card share, for either sly DE, sly UK or Sly IT. If you want all 3 you need all 3 cards/ shares.
2. Oscam emu bin with icam patch for the required package,
the one in the first post is patched for all 3. Rename the bin your replacing correctly and give it 755 Permissions.
3. The corrrect oscam configs. Attached to the first post is some basic configs, with example readers.
4. An icam channel list for each package you require. ciefp setting has all 3 https://www.linuxsat-support.com/filebase/file/290-enigma2-ciefpsettings/#versions UK users can use ABM and custom mix, thx dsayers or KiddaC list attached.
5. the correct STB settings as posted above.
OR:
Below is an IPK that should work on all STB's. VIX users should use the script method for softcams.
As always backup your image before trying any changes.
The IPK contains the patched bin for ARM and MIPS STB's and the basic configs.
############################################
IPK for installation on Enigma2 receivers attached here
#enigma2-plugin-softcams-oscam_11718-emu-icam_all.ipk#
############################################
Stream relay bouquet files on line below
userbouquet.sky-de-it-uk-icam-01-10-23
Please, don't send me PM because i will not responds.
Thanks,
;
For most people, the ipk above will suffice and is easiest to use. However, for those wanting the binary files, they are are attached below.
To use the binary, firstly, install an oscam from your image's plugins server. Download the binary relevant for you receiver. Rename the binary to match the one that is installed in your receiver . Ensure it has 755 properties.
mipsel libusb binary
OSCam-11718-798 (mipsel libusb).zip
arm7ve binary
arm7ve libusb binary
OSCam-11718-798 (armv7ve libusb aio ipv6).zip
arm7ve libusb pcsc binary
OSCam-11718-798 (armv7ve libusb pcsc).zip
ubuntu i686
OSCam-11718-798 (Ubuntu i686).zip
ubuntu 64bit
OSCam-11718-798 (Ubuntu x86_64).zip
aarch64
qnap arm libusb
OSCam-11718-798 (qnap arm libusb).zip
mipsel libusb aio ipv6
OSCam-11718-798 (mipsel libusb aio ipv6).zip
arch64 libusb ipv6
OSCam-11718-798 (aarch64 libusb aio ipv6).zip
sh4 binary