Mgcamd help me please

There are 9 replies in this Thread which was already clicked 590 times. The last Post () by pinokio0.

    Help me please!

    Note: The data in the lines are not real, just to give an example?


    i have this lines Newcamd, but I would like convert these lines to the mgcamd protocol

    I would like to a test (as a customer only)



    N: mycccamtestoo.com 12159 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    N: mycccamtestoo.com 12160 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    N: mycccamtestoo.com 12161 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    N: mycccamtestoo.com 12162 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    N: mycccamtestoo.com 12156 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    N: mycccamtestoo.com 12154 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14



    After reading some posts I made these changes:


    CWS = mycccamtestoo.com 12159 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    CWS = mycccamtestoo.com 12160 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    CWS = mycccamtestoo.com 12161 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    CWS = mycccamtestoo.com 12162 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    CWS = mycccamtestoo.com 12156 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    CWS = mycccamtestoo.com 12154 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1


    Then I went to /user/keys ans in mg_cfg I put these lines there and saved.

    In the box I activated the softcam mgcamd-1.46, but no line appears.

    But I know these lines are ok.

    Can anyone explain to me what I'm doing wrong?

    What structure should the mgcamd lines have and how should they be ordered in mg-cfg?

    Is this configuration wrong?

    If it's wrong, how should it be?


    CWS = mycccamtestoo.com 12159 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    CWS = mycccamtestoo.com 12160 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    CWS = mycccamtestoo.com 12161 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 server1

    ........


    Thanks for the help!

    Quote from master G
    Quote from corpina

    Then I went to /user/keys ans in mg_cfg I put these lines there and saved.

    Those lines should go in newcamd.list, not mg_cfg.

    Use these configs ~ Working MGCamd Configs For Latest Enigma2 Images & Receivers

    Thanks for the Help but I can't do it!

    I did the follonwing:

    With DCC I put these files in user/keysWorking MGCamd Configs For Latest Enigma2 Images & Receivers


    Then I placed my lines with this configuration in the following newcamd.list


    CWS = mycccamtestoo.com 12159 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    CWS = mycccamtestoo.com 12160 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    CWS = mycccamtestoo.com 12161 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan


    Bu not work.

    I dont Understand how to configure my lines like this:


    CWS_KEEPALIVE = 300

    CWS_INCOMING_PORT = 21000

    CWS = 127.0.0.1 10001 linuxsat1 support1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan


    Please explain to me how these 3 lines should be inside t the following newcamd.list?

    CWS = mycccamtestoo.com 12159 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    CWS = mycccamtestoo.com 12160 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    CWS = mycccamtestoo.com 12161 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    Quote from pinokio0

    .You open the newcamd list and copy what you need and insert it into your newcamd list and that's it, and you start your mgcamd.

    They dont understand me!

    Inside the folder newcamd list, this is my list?

    But I dont Understand how to configure my lines


    Like this?

    CWS = mycccamtestoo.com 12159 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    CWS = mycccamtestoo.com 12160 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan

    CWS = mycccamtestoo.com 12161 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan


    or


    Like this:

    N: mycccamtestoo.com 12159 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    N: mycccamtestoo.com 12160 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14

    N: mycccamtestoo.com 12161 pvr6 mycccamtestoo.com 01 02 03 04 05 06 07 08 09 10 11 12 13 14



    This is my doubt because Ive tried this 2 forms and it doesn't work.

    .You have to explain better. Do you want to open your local card from the newcamd list that is in your receiver or did someone give you via the server to test the newcamd list and see if it works for you?

    Quote from pinokio0

    .You have to explain better. Do you want to open your local card from the newcamd list that is in your receiver or did someone give you via the server to test the newcamd list and see if it works for you?

    I have lines that were offered to me (free), now I want to put them in my box and use them (only custom)

    So, if you get that line as you say for free from someone, you have to ask him which mgcamd 1.46, or some other one you have to install in your receiver and then insert that line of newcamd list into your receiver. You can't just insert newcamd list into the receiver. it works. You have to have Mgcamd or Oscam, maybe who shares that newcamd list, in order for it to work properly. I think you should first ask the person who gave it to you what you need to install in the receiver for it to work.

MGCamd Support Forum

Configs, discussion, downloads and guides for MGCamd Softcam.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login