Posts by mrbirdseye

  • fast forward

    i get x128 on the openatv 5.3 image on my solo2 ive tried every image and i think this is the best for the box also with a sly skin that works great but we all have our own favs

  • oscam emu help please

    [global]
    logfile = /tmp/oscam.log
    clienttimeout = 7000
    fallbacktimeout = 1750
    clientmaxidle = 0
    netprio = 1
    nice = -1
    maxlogsize = 300
    waitforcards = 0


    [dvbapi]
    enabled = 1
    pmt_mode = 0
    user = dvbapi
    boxtype = dreambox


    [webif]
    httpport = 8888
    httpuser = oscam
    httppwd = oscam
    httprefresh = 3
    httpshowuserinfo = 1
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
    http_status_log = 1


    - - - Updated - - -


    this config clears it but not my virmin share ?

  • oscam emu help please

    i have a 23.5 east card share but cant get it to clear with this config can anyone help
    [global]
    logfile = /dev/tty
    nice = -1
    preferlocalcards = 1


    [cache]


    [streamrelay]
    stream_relay_enabled = 0


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 1
    request_mode = 1
    delayer = 70
    ecminfo_type = 4
    user = enigma
    read_sdt = 1
    write_sdt_prov = 1
    extended_cw_api = 2
    boxtype = dreambox


    [webif]
    httpport = 8888
    httpuser =
    httppwd =
    httptpl = /etc/tuxbox/config/
    httprefresh = 30
    httpshowmeminfo = 1
    httpshowuserinfo = 1
    httpshowcacheexinfo = 1
    httpshowecminfo = 1
    httpshowloadinfo = 1
    httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
    http_status_log = 1

  • mgcamd problem running sat and cable

    then it should be fine then it worked for me ?


    - - - Updated - - -


    are you putting your lines in a newcamd.list file ?


    - - - Updated - - -


    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }


    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 01 }


    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 02 }


    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid
    U: { 01 } 0x12c0


    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }


    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    # 32 cccamd netclient, card list saved as /tmp/cccamd.info
    # (ECM only, supported server version up to 2.1.1, later not work)
    G: { 33 }


    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30


    # network ecm timeout in seconds
    K: { 10 }


    # newcamd dead routes connect retry, sec
    Q: { 600 }


    # network shares priority
    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)
    # 01 camd3, radegast, cccamd, gbox, newcamd
    # 02 cccamd, newcamd, camd3, gbox, radegast
    P: { 00 }


    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password


    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80


    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log


    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }


    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }


    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 00 }


    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }


    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    # 06 dreambox/mips
    # 08 stapi/kathrein
    # 09 stapi/ipbox
    # 11 stapi/openbox
    B: { 06 }


    # map all 180x nagra caids to 1801
    # default is 01
    F: { 00 }





    try this config in your cf_cfg

  • oscam emu help please

    hi can anyone help im using the latest oscam emu 11289 i have sly share with no problems i also have virmin share but im getting alot of glitching it works fine in mgcamd but not with the oscam the card seems to time out for a few seconds now and again please help

  • add old bouquets ?

    can anyone help i have virgin + sky + euro shares i have the sat from vhannibel but well out of date ive got a virmin bouquet but dont want to lose it if i update the channel list is there anyway i can save it and add it to the updated channel list ?

  • oscam help please

    can anyone help ive installed oscam on my vu solo 2 to open shared cards all is fine using ccamd but getting alot of freezing on oscam i have sly and vermin shares im only trying oscam for better ecm time for euro channels

  • What's my dish options?

    im pretty sure you can upto a 1m dish without any problems like i have ive never heard of this before i would see if this was in the deeds or in writing somewhere is the an option to ground mount it low down bottom of the garden ect ive done that in the past with no problems

  • dm800hd hdd problem

    after all the trouble with the image freezing ect ive flashed the box back to bh but having the same problem the hdd is not showing up in device manager i get the message when i try to mount it
    root@dm800:~# mount /dev/sda1
    NTFS signature is missing.
    Failed to mount '/dev/sda1': Invalid argument
    The device '/dev/sda1' doesn't seem to have a valid NTFS.
    Maybe the wrong device is used? Or the whole disk instead of a
    partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
    mount: mounting /dev/sda1 on /media/hdd failed: Invalid argument
    root@dm800:~#

  • dm800hd hdd problem

    ive tried both fixes with no look this is the log from the second
    root@dm800se:~# umount /dev/sda1
    umount: can't umount /dev/sda1: Invalid argument
    root@dm800se:~# mkfs.ext3 /dev/sda1
    -sh: mkfs.ext3: not found
    root@dm800se:~# mount /dev/sda1 /media/hdd
    NTFS signature is missing.
    Failed to mount '/dev/sda1': Invalid argument
    The device '/dev/sda1' doesn't seem to have a valid NTFS.
    Maybe the wrong device is used? Or the whole disk instead of a
    partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
    NTFS signature is missing.
    Failed to mount '/dev/sda1': Invalid argument
    The device '/dev/sda1' doesn't seem to have a valid NTFS.
    Maybe the wrong device is used? Or the whole disk instead of a
    partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
    mount: mounting /dev/sda1 on /media/hdd failed: No such file or directory
    root@dm800se:~# mkdir /media/hdd/movie
    mkdir: can't create directory '/media/hdd/movie': No such file or directory
    root@dm800se:~# chmod 777 /media/hdd/movie
    chmod: /media/hdd/movie: No such file or directory
    root@dm800se:~# chmod 777 /media/hdd/movie

  • dm800hd hdd problem

    can anyone please help im going around in circles trying to get the hdd to work on open pli image when i check the file system and try initialization i get
    (mkfs.ext3) was not found im ripping my hair out with it ive tried all-sorts for 2 days now hope someone can help ? thanks

  • oscam help please

    can anyone help please i have a euro sub with alot of cards but ccam doesnt seem to open them all came someone please help me to settup oscam to solve the problem ? thanks

  • audio options

    hi ive installed the plugin from two different sources but rebooted but cant find it anywhere ?


    - - - Updated - - -


    its ok its all done thank you for your help