Posts by asaphus1

Did you add ignore.list, priority.list and replace.list files to the folder?
The following mg_cfg file works for me in my solo2 with all images.

##########################
###LINUXSAT-SUPPORT.COM###
##########################

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

You can change the option B: according to your device.

Quote from smokoe1

Hi, Iv had my Vu+Duo now for a few years, i have always ran VIX backup images (as anytime i try to set a fresh one up it doesn't work) I have always noticed my boy is rather slow and very temperamental i.e if something is recording and i try and play a recording at the same time the box will freeze, if i have to restart the box i have to unplug it for over 10 min or it wont boot up. i may be wrong but I'm putting this down to a slow cpu and low flash memory?

This being the case i would like a fast reliable box, Twin tuner, good RAM/flash. I use it as S*y box only, i did use 1channel etc a lot when i first got it but i cant get anything like that to work any more.

Which Box would fit the bill?

Thanks.

P.S there will be a Vu+Duo up for sale soon............Providing the issues i am having are user error/software rather than hardware issue.

Display More

Hi buddy. You should NOT have those problems. Just fresh install another image and see how it goes. I have a vu uno and it does all of those things with ease.

Glad its sorted buddy. ALWAYS flash an image through usb drive and avoid vucc!

Have you tried one of those ORIGINAL IMAGES?

Hi buddy. I think your solution is "Recover at CFE multiboot". Unfortunately I cannot post the link to other forum but you may find it if you googl "Recover bei CFE Multiboot vu plus". The site is in German.
Good luck

There is only one mg.cfg for all boxes, but sometimes you need to modify it a bit according to your personal needs, such as box type and so on.

Mate, my advice is to flash open blackhole then install as many images as you want in the multiboot, done.

Do you have the priority, ignore, and replace files in there as well? chmod 755? have you set the box type, B, in mg_cfg to {06}?

Quote from kari

Realy ?
I then appologize as i did not know they have come with that now lateøly
Would you please lett me know what image has support for Kodi as you say Real Kodi, not addon. I would love to try that out on an Vu+ box
The addon we are taloking about was first introduced to Xtrend :-)

If Vu+ have the real Kodi then plz just lett me know what image has that so i can test out thanks.

Blackhole, openblackhole, VTI, openATV, openVIX, etc.. all have the (almost) proper XBMC/KODI as plugins and it works great. Realy mate, I do not want to make your mind for you, but I remember that I was in the same situation as you are right now and I totaly get you buddy:).
I 've never owned a xtrem box, but I am realy happy with my solo2 as it does what I need it to do.

Good luck

Quote from kari

asaphus1 Kodi / xbmc was first introduced on Xtrend, the Vu+ Copy that :-) ask and loo

The kodi/xbmc which you get with vu+ is almost the real kodi/xbmc experience (it lacks the pvr addon function), not the kodi direct addon in xtrend boxes.

Also, remember that VU+ has the capability of running XBMC.

Forget crossepg. Use XMLTV Import instead buddy.

SOLO 2 would me my choice too. Its a powerfull beast.

There is not such an app in google play nor anywhere else buddy!