thanks for that info, but i am still having problems. Most channels default to audio description I have done what you said master g, but still get no joy
many thanks
daz
thanks for that info, but i am still having problems. Most channels default to audio description I have done what you said master g, but still get no joy
many thanks
daz
hi, when i change channel the default audio is the audio description, can I set my box to just ac3 audio.
On the vix image
daz
nice one pal, thats really help. Many thanks. i just wish the seller on ebay could of told me all of this
is there a series link option on the box?
many thanks again
daz
Display MoreDaz,
check what Setup Mode you're in....
menu --> setup --> system --> Customize --> Setup mode (change to 'Expert' if you're not already in it)
Then check to see if the recording paths have appeared...
yup now done that, still says every time i switch off the box no hdd found or hdd not initiazed, even after setting paths.
recording paths - menu --> setup --> system --> recording paths
As long as you save your settings the HDD should work next time you reboot!
Set your recording path, save and reboot....have you lost the HDD settings?
hi sandman. to be honest the hdd never worked right since I have had the box. I have reflashed the box today with latest blackhole, set up hdd. there is no recording paths in blackhole.
menu --> setup --> system --> there is no recording paths there
daz
I have Vu+ Duo Black Hole Enigma 1.6.6
I installed a used 500 Gb Hard disk.
Then Vu+ Duo found disk and I could initializing and check file system.
When I go to Hard Disk, I see Detected HDD: ATA(ST3500641AS)
I'm able to record but If I however switch Vu+ Duo completely off (remove plug from socket) and then switch back on later, it seems that Hard Disk has lost initialization because when I press record, I get error message that HDD is not initialized. I still find Hard Disk in menu and can re-initialize it. Then it works again.
So basically every time I switch on I need to initialize Hard Disk again.
have read about checking recording paths but i can`t find the on the menu
thanks for help, but still can`t get the card to update. I`ve not had any ecm entitlements and my card runs out soon.
daz
updated last night, many thanks for help
hi there i`m hoping some one here can help me. I am using Oscam5985/ccam213 and I am not getting any Updates Entitlements I am using Vu due as my reader with blackhole image and have a dm800 and a couple of dm500 using ccam
oscam.conf
[global]
nice = -1
WaitForCards = 1
logfile = stdout
preferlocalcards = 1
saveinithistory = 1
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.2-192.168.0.100,192.168.1.2-192.168.1.100,192.168.2.2-192.168.2.100
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:000000
oscam.user
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 1
group = 1,2
au = 1
caid = 0963:000000
oscam.server
[reader]
label = slyuk
protocol = internal
device = /dev/sci0
enable = 1
caid = 0963
ident = 0963:000000
boxid = xxxxxx
detect = cd
reconnecttimeout = 5
ecmcache = 1
emmcache = 1,3,2
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
group = 1
CCcam.cfg
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
F: dj dream 1 0 0 {0:0:2}
F: gem gem 1 0 0 {0:0:2}
F: daz1 daz1 1 0 0 {0:0:2}
Any Ideas whatI Am doing Wrong
many thanks
daz