#
Hi @marcel45143
I need to download the Dreambox GP4 OE 2.5 Plugin, for the Open Dreambox 2.5 image.
Appreciate.
#
#
Hi @marcel45143
I need to download the Dreambox GP4 OE 2.5 Plugin, for the Open Dreambox 2.5 image.
Appreciate.
#
#
Hi, eye4jaan
Good information, because I'll be more confident.
However, taking advantage of the fact you use this DM900UHD, go to this link, and please inform:
Sorry for the inconvenience.
Thank you.
#
#
Hi, emosim
I apologize for having requested this information on other Forums.
I will install as soon as I receive the DM900UHD 4K.
Thank you very much.
Hugs.
#
#
Hi, emosim
As per the description of the functionalities of this image, it is in fact what I need. But I have to change the box by placing the Chip / Sim.
I understand that this image can not be installed without this original Chip / Sim. Right?
I'll need more information.
Thank you very much.
Hugs.
#
#
Hi, emosim
This DM900UHD 4K is official.
Does it get OpenPLi for DM900UHD by Japhar Team, no problem?
Please confirm.
Send the link to download.
Thank you.
#
#
Hello
I I bought a Dreambox 900UHD 4K. But I have not received it yet.
It replaces my DM8000HD, "old lady" with ten years. But she is in perfect working order, esteemed and as new.
#
I need some information, suggestions and tips.
I come to ask your help to:
- OPenPLi does not provide firmware. Right?
- Operating System / Firmware: 2.5 Enigma2. Right?
- ATV firmware or another with Stream / IPTV capability?
- CCcam + OSCam-emu, must they be ARM?
- Picons (size)?
#
Other information.
Thank you very much.
#
#
Hi momi133
Successfully Installed:
Installing enigma2-plugin-extensions-bissfeed-autokey (20190602-r1.5-By-momi133) on root
Checking for BissFeedAutoKey in the system ...
BissFeedAutoKey was not found in the system
Proceeding to installation ...
Checking for TypeLabel.py in the system ...
TypeLabel.py was not found in the system
Proceeding to installation ...
Checking for piconuni.py in the system ...
ProgressPixmap.py was not found in the system
Proceeding to installation ...
Checking for piconuni.py in the system ...
ServiceName2.py was not found in the system
Proceeding to installation ...
Checking for piconuni.py in the system ...
ServiceInfo2.py was not found in the system
Proceeding to installation ...
Checking for piconuni.py in the system ...
CaidInfo2.py was not found in the system
Proceeding to installation ...
Configuring enigma2-plugin-extensions-bissfeed-autokey.
************************************************** (I.e.
* BissFeed AutoKey successfully installed *
* Writed by << momi133 >> Start @ Jan 2019 *
* *
* USE OK OR GREEN KEY to Apply changes to Softcam.key *
* *
* .. :: USE BLUE KEY to Set Softcam.key Directory :: .. *
* >>>>>>>>>>>>>>>>>>> USE BLUE KEY <<<<<<<<<<<<<<<<<<<<<<< *
* *
* |||||||||| .. :: SET WEBIF PORT TO 8888 :: .. |||||||||||| *
* *
************************************************** (I.e.
* Restart the Engima2 GUI to use the plugin *
************************************************** (I.e.
Thank you.
#
#
Hi momi133
We have a problem here.
I uninstalled the plugin. Now I tried to reinstall, but it did not succeed.
See attached images.
I await correction.
thank you
#
#
Hi @
There is no "plugin" for the BISS Channels in Hispasat (30.0W).
They are satellite reception channels.
#
There are two BISS Channels, in addition to others:
RTP 3.30.0 W, 10730H 27500 3/4, 0003.0, TV
TVI International, 30.0 W, 10770H 30000 5/6, TSA, 07D0.0, TV
#
Keys are in the file I sent you.
See also this image.
#
Hug.
#
#
Hi momi133
No error is displayed on the screen to record.
What happens when the "BissFeedAutoKey Plugin" runs:
The keys, some, are changed to the old keys.
Like, for example, the key of "TVI International" in 30.0W (Hispasat).
See the file I'm sending. This file has the keys updated. Do the experiment.
Thank you.
#
#
Hi momi133
I installed the "BissFeedAutoKey Plugin" on my DM8000HD, with OpenPLi 7.0 installed.
Channels RTP-3 and TVI International, in 30.0W (Hispasat), are no longer seen. The keys are changed, but they are not the correct ones.
You should correct this problem.
Thank you.
#
#
Hi
I have DreamBox DM8000HD, with OPenPLi 7 installed.
I also installed the OSCam EMU 11518 r796.
#
ABERTIS channels are in the box bouquet.
The file "lamedb" was edited and the transponders included.
#
I have the Softcam in / usr / keys, with the ABERTIS codes (I think they are updated).
#
I tried opening the channels one by one.
So I noticed that there are only two that open:
"RTP-3" + "TVI International".
Because they are BISS channels.
#
All channels have the following information:
"TP INFO IS NOT DETECTED"
"SERVICE THE STREAMING (IPTV)"
"TUNER NOT DETECTED"
"EXTENDED EPG NOT AVAILABLE"
NOTE: The EPG appears on some (many) channels that do not open.
#
In the installation:
I installed "astra-sm" with telnet: opkg install astra-sm.
In the /etc/ folder I have the "astra" folder, with:
"astra.conf" + "scripts" + "abertis".
#
Among the files collected on the Net, I have an "Abertis IDs" file, but I did not install it. I do not know where to put this file. And I do not know if it's necessary either.
Within this file there are lines like this:
"0BD11FFF; ABERTIS 2025 (30W)".
#
What am I doing wrong?
What should I do?
I look forward to your help.
Thank you.
#
#
Hi ahmed gazye
I humbly tell you that I am a newbie.
I have Oscam-emu 11518-r796 installed in DM8000HD with OPenPLi 7.
Question:
Should I copy all these files to my "config" folder in / etc / tuxbox / config?
Thank you for your information.
Thank you very much.
#
#
Hi, chrismalta
For those who have difficulty converting ccam data to oscam, then CCcam to Oscam Converter is what they need.
cccam_converter_oscam:
If you find it difficult to convert data from a CCcam line to OScam with the CCcam Converter for windows you will be able to convert with ease, the program supports C Lines, F Lines, and N.
Just open your CCcam.cfg in the program and then click on "Convert to Oscam" that the oscam.server file and oscam.user will be generated.
You can also do it manually by copying the lines to the program and clicking on "Convert to Oscam" it generates the format converted to oscam.
#
#
Hi ZYGA
I have DM8000HD with OPenPLi 7 installed.
Does this Plugin work in my Box?
Does this plugin delete CLines in CCcam.cfg and put new ones?
Does this plugin, by deleting the CLines in CCcam.cfg, back them up?
I await your information.
Thank you.
#
#
Hi, hinoxe
I have DM8000HD with OPenPLi 7 installed.
I installed this Plugin:
enigma2-plugin-extensions-cccam-finder_06-04-19_all.ipk
#
Does not install properly.
Accessing Menu - Plugins
ERROR:
#
Warning
Some Plugins are not available:
Extensions / CCcamFinder (no module named requests).
#
I await correction.
Thank you.
#
#
Hi, W@Rp
Excellent job.
I have DM8000HD with OPenPLi 7 installed.
It's perfect with the SKY Germany Channels.
And it can be installed next to OSCam 11518-Emu-796.
Thank you very much.
#
#
Hello Nino.73
I stopped using CCcam.
I am using only OSCam 11517 r795.
Please tell me:
I also have to use the CCcam.prio + CCcam.channelinfo + CCcam.providers?
Thanks for the information.
Thank you.
#