saveemm parameter doesn`t help update entitlements, all it does is save any EMM`s received to a log file..
well, then I dont know. I have installed the oscam + mgcam and no EMMs were received on the card, I changed to oscam + cccam and I could see them and accepted.
The only problem is that oscam + cccam works for my VIACCESS 4.0 but nothing for the VIACCESS 5.0.
I got 430 ECM not ok so this system doesnt work with the version 5
wow! I have installed mgcam but nothing worked, so I decided to go back to oscam + cccam with your saveemm and after 2-5 minutes the version 4 got valid!
Now I am trying to validate the card version 5 with the same method.
You can also add that saveemm config to oscam.server for oscam+mgcamd configs..
Yes this is was my question, sorry :)
I have installed oscam + mgcam with these parameters to save EMM but I was wondering if you wanted me to try with oscam + cccam instead.
I will keep running my oscam + mgcam, and as soon as I get some EMM packages, I will update the topic.
Thank you anyway, you are very helpful :)
now I have removed oscam + cccam and installed oscam + mgcam, should I come back to oscam + cccm and add these "saveemm" or should I keep oscam + mgcam with these "saveemm"?
More updates about oscam: http://pastebin.com/cQ26Gp5j
and in the reader page:
I get OK: 0% and NOK: 100% ( 195 )
I will try with oscam and mgcam
I will keep running the OSCAM for few hours.. but if nothing goes well... I will think that my card is fucked
Ok sorry.
This is the output with oscam + cccam and with your srg config: http://pastebin.com/9SYuN82J
This is viaccess card v4, I have a v5 as well...
Ok I got nothing...
I checked this thread as well : http://linuxsat-support.com/showthread.php?t=51166
I got a V4 and V5 viaccess and both of them are not updating.....
I have put back CCCAM & OScam
[oscam.conf]
##########################
###LINUXSAT-SUPPORT.COM###
##########################
[global]
nice = -1
logfile = /var/log/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
resolvedelay = 30
serialreadertimeout = 1500
maxlogsize = 10
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
keepalive = 1
[newcamd]
port = 10001@09cd:000000
key = 0102030405060708091011121314
mgclient = 1
keepalive = 1
[webif]
httpport = 8888
httpuser = linuxsat
httppwd = linuxsat
httprefresh = 15
httpshowpicons = 1
httpallowed = 192.168.0.0-255.255.255.255
[cccam]
port = 12000
version = 2.1.3
build = 3165
reshare = 1
[oscam.user]
[account]
description = CCcam
user = linuxsat
pwd = support
group = 1
au = ***it
caid = 09cd
keepalive = 1
[account]
description = srg
user = srg
pwd = support
group = 2
au = SRG
caid = 0963
keepalive = 1
[oscam.server]
[reader]
label = SRG
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
group = 2
emmcache = 1,3,2
It works with my C LINE, but nothing about the Card.... I contacted my supplier to "fake" that my card is broken, I might get a new one :)
Tell me if there is something wrong on the config and if I need to fill up the oscam.services with my SRG channels
Ok... I think there is something wrong on my OSCAM, because I just started Cccam with the card and I got already this:
handled 6(0) ecms and 4(1) emms
I might keep on Cccam if it works
Manager of Cline ?' What is that buddy?? YOU mean your peer ...well if he has issues there´s not a lot you can do except choose not to continue ...
To recieve emms the card needs to be left on a subscribed channel,,
if it´s not then it won´t recieve through sat unless you have your configuration setup to receive from another peer(s)
I got some frozen picture from his line, so I was wondering if it was something with VU+ but I contacted him.. so its his fault :) That problem will be solved.
Now I want the EMM for my SRG card. Trying any possible combinations :(
Ok thank man!
I will keep the decoder running for a few hours on the channel...
What I see is: 2014/07/12 15:13:25 xxxxx r SRG [viaccess] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
and I checked the number 2 means CARD OK.
I wonder if my dreambox fucked up the card or no...
Later I will try with oscam and mgcamd
Right I contacted the manager of the cline, he said that he has issues....
I will keep running your config and hopefully I will get the new EMM.
Do I need to keep the decoder on the channel of the card or I can just watch other channels in the mean time?
Thank you anyway for you help :)
13:00:23.051 CCcam: remote ecm <- xxxxxxx error (took -nan seconds)
Then for 10 seconds it frozen then get more ECM
Ping from the machine I get 30ms , is that the server issue?
Also I have updated the card setting for my SRG, how long will it take to get the new EMM?
I have installed Blackhole and everything worked!
I have installed enigma2-plugin-cams-oscam-v9567_cccam213_bh_all.ipk and put my C line and it started to decode my channels.
After 1 minute it freezes and I have to wait a while before it get unfrozen. Then it happens again....
Also I am trying to get a EMM code for my SRG viaacess, but I dont get anything :D
So I will setup my config OSCAM to read the VIACCESS and to connect to my C LINE?
SRG suisse
Sorry to be very silly but I need a good advice from a great community like this.
I was using a dreambox 500 and 800hd but I wasnt happy so I bought a VU+ solo2 and I will soon install black hole.
I have a viacess card and a cccam line to watch tv, on my current setup I had cccam client and thats it
I know that cccam is not very good, even because I couldnt get EMM package anymore and not very stable decoding.
I have been suggested to use OSCAM or SCAM, what would work best for my current needed?
Thank in advance :)
I tried oscam but it gives me this:
2014/04/20 10:46:00 31825B50 r Setting T=0 fs=4 mhz ETU=372 WWT=9600 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=5 I=25 U=0
2014/04/20 10:46:00 31825B50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 4.80 Mhz
2014/04/20 10:46:00 31825B50 r IFD: Card in reader srg succesfully activated
2014/04/20 10:46:01 31825B50 r [***********-reader] failed history check
2014/04/20 10:46:01 31825B50 r [**********12-reader] failed history check
2014/04/20 10:46:01 31825B50 r card system not supported
2014/04/20 10:46:01 31825B50 r card initializing error
2014/04/20 10:46:01 30016280 s init for all local cards done
2014/04/20 10:46:01 30016280 s anti cascading disabled
I have to try with scam ...
Its a SRG suisse card
I got a Viaccess card and the "validation" expired 2 days ago and it wont get a new validation via EMM.
I have
SMARTCARD CLOCK FREQUENCY : /dev/sci0 3570000
DISABLE EMM : no
EXTRA EMM LEVEL : yes
EMM THREADS : 1
But what I see from the web interface is:
card reader /dev/sci0
handled 3(0) ecms and 0(0) emms
Viaccess card
Caid 500
Cardserial c41f30
ident fff430 - c41f30
ident 50800 - c41f30
ident 50810 - c41f30
ident 50820 - c41f30
ident 50830 - c41f30
ident 50840 - c41f30
valid from 5-3-2014 untill 4-4-2014
valid from 4-3-2014 untill 17-4-2014
Any help? Pls!
