Cheers for the reply, It didn't fall on deaf ears... I'm having problems with my dish at the moment. I'm sure it's my amature mistake.
Can't get anything below 19E or above 28E... I need to get up the ladder and have a tweek using the guides on here.
Will keep this updated as and when.
Hi all...
Is it possible to install Sat keys into Mgcamd to view channels at the same time of using Mgcamd from another server?
Basically, I'm using Mgcamd already with a C: line... I now want to play with Keys to view Greek channels on 3*E (If I can get 3*E, I've not tried yet.)
I don't want it to interfear (sp?) with my existing C:line or my life won't be worth living!!! :39_002:
I'm using my system as a test bed before I look like the golden boy to my Mother-in-law!! :58_002:
Incase anyone asks... I've looked through 8odd pages on here and havn't found anything out on it. Just remember please I'm one man trying to learn this with the help of this forum! I have no friends that can come to my rescue... In other words, Put it in laymans terms... lol I'm not tech savvy!
I can FTP ect... so not too stupid!
Thanks.
Hi, I'm looking for both FTA channels (greek) and getting a sub...
I have only found RikSat on 13E... Non of my greek family know much about it so can't help me...
I'd like to find more FTA channels and the Sat they are on... Also I'd like to pay for a sub and share it with the family. I know **** can't (or so I believe) be shared due to the card having to be paired with the box...
However If anybody has any information on a sub I can buy and use in my Duo2 I'd be really grateful.
Thanks in advance.
I really thought this post was a wind up till I clicked onto it!!!!
I mean 8ft? Unless you are directing aeroplaines I have no friends that would believer this!! lol
:77:
Good call, I'm going to back it all up (pretty sure it's all backed up anyway...)
If I flash a new image to it will I need to set all the channels up again and addons?
Cheers...
This might have been covered before but I'll try to kick it off again if it has...
I use OpenPLi 4.0 on the Duo2 and OpenPLi 3.0 on the 800se...
Reason being is the Dreambox was delivered with it....
As for the Duo2.... I first put on Blackhole and needed help on the forum they all use (mods for Blackhole)..
I asked a question that wasn't allowed (my mistake) and got banned for a day. I didn't know I was banned but couldn't log in.... Tried on another computer without logging in and saw he'd banned me. When ban lifted I posted that the mod should explain why I was banned..blah blah blah. The mod permanently kicked me for multiple ids..! I only had the one!
So I got rid of Blackhole ... Lol..
I'd like to play with some other images but first I'd like to hear why you use them before I go reflashing my box!
Thanks for moving the post and answering those questions...
And Thanks Nano... A lot of that went over my head, however I'll be using what you said for homework! Nothing like a bit of research to kick start tomorrow ;)
She currently just watches fta channels but if I can fix it for her I'll do my best to as she's a great mother-in-law...
She's after Cypriot channels but also welcomes the Greek ones. I'm not sure how to find people that will share the channel info but hopefully over time I'll build some allies on her.
Knowledge is power! :)
The mother-in-law wants her Greek TV in her bedroom...
So got her a new TV, Just got her an F5s for the bedroom and also bought an Inverto ultra quad for the dish...
She's got a crappy horrible unuser friendly STB in the front room that is only ever on RIK sat (I really can't be assed to do anything to it)!
So, I've just sussed out (I think) that the F5s is also referred to as an Openbox?
I'm assuming there isn't as many images avalble for this STB?
All I want to do on it is be able to move the dish and get her Greek TV (Hotbird I think...) What is the best image to use on it for user friendlyness?
Cheers...
P.s......... Did I make a bad choice with the F5s??? I know it's dirty cheap... £45 delivered from Ebay...
My Vu Duo2 is a better picture than my Sly HD Box... Even my Dreambox 800se HD Clone was a better picture...
And I thought my *** had a good picture. Thats on a 46" Sony Bravia (5 years old)
I see... Ok, thanks for the help. I kinda expected that reply from what I had been reading... If I go into TSpanel and unmount then remount all is good.... Just a pain to do it and the Mrs I dont trust trying!!!
OK, I used TSpanel to unmount then remount... It's back.
Would like to know what is causing it though..
Just to add, I was previously browsing TSpanel before I noticed this happen.
Not the previous times though..
Hi, this is the third time now...
I notice it by losing all my EPG... I look at my CoolEPG setup and see it's set for Flash write... I can't select HDD...
I check my recorded programs... Bam, all gone. If I go to settings and try to remount it I'll lose everything on the Hdd..
Is there another way? Why the bloody hell is it doing this. :(
It worked!!
Thanks for the help.. Really appreciate it.
Yes I can pause live tv.
I'm just about to try the above...
Cheers.
EDIT, Just noticed a stupid mistake on my behalf... I posted this in the wrong section as It's the Duo2 that It's playing up on. Still give it a go anyway...
So I downloaded the plugin CoolEPG downloader and it updates fine..
However it saves to flash... Under the setting I can change it to my other storage devices. Except the plugin can't see the HDD...
I have it formatted and mounted. I use it for recording and FTP'ing downloaded movies ect to it and play back is not a problem!
Any ideas what I can do? I'd rather not keep using the flash for it....
I know I should'nt post up thanks here but I wanted to say this has sorted everything out...
I'm about to copy this to my Dreambox now and fix that.... I can then give it to my Mother-in-law.
A good bit of help for any noob having the same problems...
This will just be a basic mgcamd cfg problem...post it here so we can see what the problem is.
MK
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 00 }
# map all 180x nagra caids to 1801
# default is 01
F: { 01 }
That's what it says (copy and paste) Is that what you ment? Sorry if not.. lol, I'm new at this!!
So I have a Dreambox 800se HD, Every now and again I have to reset the cam to get certain channels (not all)... I've put up with it for a little while..
Tonight I thought I'd try to switch everything over to my new Duo2... (for me that is not easy!) lol.
Got everything running on the Duo but I have to keep bloody resetting the cam on that as well... But even more so than on the dreambox.
Is there something that I'm missing here? Any help would be greatly received!
By the way, I love the forum. Great place. :)
I'm using Mgcamd? As that is what was set up on the dreambox when I bought it as a ready to roll package... I didn't always have this problem either.
