01 67A501D52D79AB
Posts by reza_
-
-
NEXT : 00 4E810FC8CD6CF1
-
00 3CA47506282D11
01 55DB91D6BA3188
-
00 6D082F59B1F799
01 B9FBF0F134B877
-
01 025D1D339979A8
-
01 786896362B0908
-
next : 01 A32E2BB5527920
-
next : 01 414DC33494DA86
-
-DM800se -SIM2.10 clone & original
-GCC 11.3.0
-Glibc 2.35
-GStreamer 1.20.5
-Python 2.7.18
-OpenSSL 3.0.7
-Busybox 1.35.0
-Linux kernel 3.2
-OSCAM-EMU 11717-798
-Feeds server is working
-Full-HD Teletext
-Front LED blink speed Setup
-ZapMode (black and hold)
-new AudioSelection
-Build date: 2023-01-11
hello, but the feed servers aren't working, and neither is the wireless network...
i installed original version, my dm800se has A8P sim. it's right?
I install it by multiboot on original DM and every things is alright.
Thanks to @mrlu
-
He creado una usb con BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img, pero no se donde se coloca la imagen para instalarla ni como funciona. Soy nuevo en estas imágenes pesadas, y realmente agradecería si pudiera ayudarme a instalarlo.
Tengo un disco duro interno, que es donde coloco las imágenes abiertas de arranque múltiple.En primer lugar, extraiga openatv 7.2 mediante la imagen de agujero negro 0.6 de BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img , cree el nombre de la carpeta openatv 7.2 en la carpeta open-multiboot (debe crear la carpeta mutliboot en usb) luego apague la caja y elimine el usb y abra el usb con un sistema linux como ubuntu / mint / opensuse / ... luego elimine la imagen del agujero negro 0.6 en la partición sda2 o sdb2 y copie openatv 7.2 en lugar de en sda2 luego copie el vmlinux- 3.2-dm800se.gz desde el arranque de la imagen openatv 7.2 hasta la partición sad1 o sdb1 ( BOOT ), eso es todo.
para más información:
[publicación='525427'][/publicación]Lo siento, estoy totalmente perdido.
No entiendo como extraer openatv 7.2 por black hole image 0.6 de BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img.
Serias tan amable de explicármelo paso a paso?
imagen de agujero negro 0.6 es la imagen que tengo que poner en el flash?
si es asi no lo encuentro
1- Crear una usb con BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img,
2- multiboot openatv 7.2 por imagen de agujero negro
3- conectar el usb al sistema linux
4- eliminar la imagen del agujero negro (en la partición sda2)
5- copie openatv 7.2 que crea en la carpeta de arranque múltiple a sda2
6- copie vmlinux-3.2-dm800se.gz desde la carpeta de inicio de openatv 7.2 a BOOT de BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img en sda1.
Step 2 I don't understand what to do.
Is it to pass the openatv 7.2 image to open_multiboot-upload and install it?
step 2: Boot from black hole image then try to run multiboot plugin and install openatv 7.2 ( like another images that you can install by multiboot )
then go to step 3 ...
-
I have created a usb with BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img, but I don't know where the image is placed to install it or how it works. I am new to these heavy images, and I would really appreciate it if you could help me install it.
I have an internal hard drive, which is where I put the open multiboot images.First of all extract openatv 7.2 by black hole image 0.6 of BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img it create folder name openatv 7.2 at open-multiboot folder ( you must create mutliboot folder on usb ) then shutdown the box & remove usb & open the usb by a linux system like ubuntu / mint / opensuse /... then delete the black hole 0.6 image in sda2 or sdb2 partition & copy openatv 7.2 instead of it in sda2 then copy the vmlinux-3.2-dm800se.gz from boot of openatv 7.2 image to sad1 or sdb1 ( BOOT ) partition, that's it.
for more information:
Sorry, I'm totally lost.
I don't understand how to extract openatv 7.2 by black hole image 0.6 of BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img.
Would you be so kind to explain it to me step by step?
black hole image 0.6 is the image that I have to put in the flash?
If so, I can't find it
1- Create a usb with BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img,
2- multiboot openatv 7.2 by black hole image
3- connect the usb to linux system
4- delete black hole image ( in sda2 partition )
5- copy openatv 7.2 that you create in multiboot-folder to sda2
6- copy vmlinux-3.2-dm800se.gz from boot folder of openatv 7.2 to BOOT of BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img at sda1.
-
I have created a usb with BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img, but I don't know where the image is placed to install it or how it works. I am new to these heavy images, and I would really appreciate it if you could help me install it.
I have an internal hard drive, which is where I put the open multiboot images.First of all extract openatv 7.2 by black hole image 0.6 of BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img it create folder name openatv 7.2 at open-multiboot folder ( you must create mutliboot folder on usb ) then shutdown the box & remove usb & open the usb by a linux system like ubuntu / mint / opensuse /... then delete the black hole 0.6 image in sda2 or sdb2 partition & copy openatv 7.2 instead of it in sda2 then copy the vmlinux-3.2-dm800se.gz from boot of openatv 7.2 image to sad1 or sdb1 ( BOOT ) partition, that's it.
for more information:
-
Hello, I take this opportunity to greet you all, and say that it is a pleasure to belong to this forum.
I have been looking around the forum a lot, especially this section of dm800se clone that is my deco, well, the sunray sr4 and
It had been a long time since I had the same image and I started to look and there is still a lot of information here, I have installed multiboot and everything is fine, but when I go to load this image it stays with the bar in the middle and it doesn't do anything else .
Do you know what could be due?
Sorry if there are spelling mistakes, I have translated it with the google translator
Hi
you can install the latest oozoon image in internal flash and multiboot it (openatv 7.2) by BarryAllen or use BOOT-FLASH-USB-E2-SIM2-DM800SE-23122019-Pgs.img and then put the extract image of openatv 7.2 on root ( instead of blackhole image) by using any linux system.
-
mkfs
so here we go:
As usual - if you chose to do it - do it at your own risk :smile:
NOTE - content of HDD/USB/CF will be erased and internal flash overwritten
what's needed:
1) a storage device
2) Telnet & FTP client's
3) nfidump
-----------------------------------------------------------------------------------------------------------------------------------
1) boot your dreambox and connect via telnet
2) check if storage is mounted and umount it (USB, MC, HDD)a) print mount table: mount
b) umount storage (anuthing pointing to your device /dev/sda* /dev/sdb* /dev/disk/...*):umount /mnt/HDD /mnt/usb ...
3) create Linux partition via telnet:
a) fdisk /dev/sda
b) print ( p ) partition table and clear it ( d )
c) create partitions (as many as you like) 1 needs to be LINUX EXT3 or 4 (this post is based on 2 partition example)
d) write config ( w )
e) format partitions: mkfs.ext3 /dev/sda1 ( and 2)4) mount formatted partitions:
a) create mount points (if not exist) mkdir /mnt/sda1 (and 2)
b) mount /dev/sda1 (and 2) /mnt/sda1 (and 2)5) copy your .nfi image to storage device (found copying to 2nd partition best) -- OpenATV 5.1 not working (/usr/bin/enigma2.sh: line 104: 2240 Segmentation fault) newnigma2 works perfectly
6) extract .nfi:
a) nfidump --overwrite /mnt/sda2/image.nfi /mnt/sda1
7) update boot directory
a) mount -o remount,rw /boot
b) make a copy of boot directory (in case of rollback) cp -r /boot /mnt/sda2
c) copy and overwrite the kernel cp /mnt/boot/vmlinux.gz /boot (or you can do it with FTP)
d) update both autoexec*.bat to:only line with root=/dev/ needs updating:
/boot/bootlogo-dm800se.elf.gz filename=/boot/bootlogo-dm800se.jpg
/boot/vmlinux-3.2-dm800se.gz root=/dev/sda1 rootdelay=10 rw console=ttyS0,115200NOTE: root=/dev/sda1 - change this to: root=/dev/whatever is your device where you extracted image...
8) reboot
9) the result:
769c08969dd97.jpgLet me know if I missed anything...
Cheers
Hi
can you tell me please which image you use for settings and in special for dm800se sim a8p which I must to use?
cheers
- - - Updated - - -
Hi,
I solve the problem. Finally my dm is booting from ssd. Thanks for your post kallisti .
all the best.
Hi
I divided SSD 120gig to 3 partitions, sda1(ext4)( for main image)-sda2(swap)-sda3(ext4)(extra capacity) & then copy extract nfi file of openATV 7.2 in sda1 partition & edit autoexe*.bat in boot folder to boot from sda1 finally I install SSD to internal dm800se but my dm could not boot from SSD, although I boot my dm by external USB by this way ( of course by adding a partition for boot image in fat 16 format ) , flash image is openatv 6.4 , how could you boot from internal SSD? Any help is greatly appreciated.
-
-DM800se -SIM2.10 clone & original
-GCC 11.3.0
-Glibc 2.35
-GStreamer 1.20.4
-Python 2.7.18
-OpenSSL 3.0.5
-Busybox 1.35.0
-Linux kernel 3.2
-OSCAM-EMU 11715-798
-Feeds server is working
-Full-HD Teletext
-Front LED blink speed Setup
-ZapMode (black and hold)
-new AudioSelection
-Build date: 2022-12-07
Hi
Could you please modify this image by PYTHON 3 for internal flash of original DM800se?
-
Hello!
You could modify the above image for the original DM800SE (external flash)?Thanks!
It's also suitable for original DM800SE and works fine.
Thanks to parageria.
-
Hi
Who can tell me briefly how can I patch the dumbo plugin with image?
thanks