the signal on 19.2e is fluctuating 71%-72% and ecm time -nan.
Posts by andrewg1
-
-
my broadband speed is around 10-12mb. is this the reason some 19.2e channels keeps freezing for few seconds and if not is that speed good enough for the vu+ solo 2 box?? any suggestions will be more than welcome.thanks
-
im now getting 99% on 28.2e and 73% on 19.2e and the rest 0% after changing the long/lat.
-
hi I talked to my eng about re-aligning but all he is saying is that the box setting may not be right. I doubt its the box but I would like to know wat must I tell him to do. I was thinking of telling him to align the sat to thor and then I can lock it thru the box and do the same for all the other sats. is that ok or is there a better way to tell him. thanks a lot and hope im not boring anyone with all these.
-
thanks but i will leave it to the engineer to sort it out as the dish is about 10m high and dont want to kill myself.lol. will let u know if any more help is required. thanks a lot everyone trying to help.
-
getting signal on 28.2e and 19.2e only. please help.//
-
thanks but tried all these. im getting 48% signal on astra 28.2 and nothing on the others?
-
which one is correct? im confused now.
tuner A is configured on advance and tuner B is not configured. is it ok?
-
thanks for ur reply but I set the longitude and lattidue to these figures but still no signals available. can someone please go thru it with me step by step?
-
wat longitude and latitude should I enter if my location is 51.361965,-0.089503.
-
What way was your tuner config setup originally for 28 & 19e???
Also have you tried using satfinder in the Blackhole image?? menu/setup/service searching/satfinder
it was set by the engineer and tried satfinder so many times but nothing seems to work except for 28.2 and 19.2e
-
to find out if your on the arc try and lock onto 1 west Thor satellite _ use aged care channel or BBC world news ¬
my suggestions would be to drive motor to 0 (zero) or goto 0 through tuner setup then manually move dish until you get a lock on one of the channels i already mentioned. Once dish is at 0 you should only need to nudge west 1 degree so go slowly and see what you can do.
If you cant lock onto 1 west you will not be on the arc _will try this and let u know. thanks a lot
-
hi pal. ive got a dark motor with gold lnb n dish size 97cm. any help will be much appreciated. thanks
-
Set Configuration Mode: simple > Mode: Positioner > Go to DishPointer and get your Lat/Long > Add Your Location
just tried it a few minutes ago and unfortunately the problem remains the same with no signal on other sats other than 19.2 east and 28.east. tried setting the motor to 0 and moved it manually but again nothing happening.
-
thanks will try it and get back to you asap.
-
thanks again for ur quick reply. im using usals then tried to tune it to get better signal and stored the postions thereafter with configuration on advanced and long/atti set to my area.
-
thanks a lot for your quick reply but im already using that channel list. the problem im having is the dish is moving onto 28.2 and 19.2 with all channels working with 87% and 70% signal respectively. if I go onto any other satellite none is getting any signal. please help
-
hi, im using a vu solo 2 with blackhole image 2.10. all im receiving is astra 28.2e and 19.2e. I talked to the sat eng and he said that I need to change the motor settings on the box to be able to configure the other satellites. please advise what to do as im struggling badly to get other channels. I tried to manually move the dish with the stb but no signal was received. thanks
-
Hi Guys
Just a quick advice with the new blackhole image on my vu+duo . Basically every 10-15 mins the information bar keeps popping up and it can be quite annoying when you watching something interesting. I was wondering if there is a setting that allows to stop itthank you guys in advance
regards
Andrew
-
Thank you again Master G for you quick response. I am very grateful for all the support I received from you since I joined here.