On some images its the buttons next to 0 eg < > (volume)
To change go settings Keybinding,
Keybindings then set key according to your needs,
on some setup you have to delete the binding before you set a new one
its all in Keybindings LOL!!
Posts by annie12
-
-
Just a drop cline in radar.cfg, mate
-
It would be very handy if we knew what kind of a setup you have eg.dreambox ???
or what kind you intend getting.. ps..do a bit of reading -
Same problem here with comedy,ect... added to the whitelist
5f,62 my answer came from oscam reporting no reader for this service -
Do a bit of research, use oscam to read the card and ccam to share
May be the easiest way LOL -
Hi l fellow commando followers here is one the latest images
with auto bouquets working. vol +/- sorted different skin ect..
all its short is a cline
image backup-ed using telnet,
To flash ftp to \tmp.... copy and paste below to telnet
cd /tmp && eraseall /dev/mtd/3 && cp backup.img /dev/mtd/3 && reboot
ps..make sure the dhcp is on in network settings!!!!
Passwd = commando -
-
to clear the air on my side, i am not cutting down clones as i have went through enough
of them, just having repaired several (maybe hundreds ) psu's in my time
on sats,tv,video and so on.
i never heard of of a house fire especially when your dealing with low voltage LOL!!!.. -
Is it possible he connected the bridge to 12volts and then used the usb
during setup, when the 12v meets the 5v supply you will
damage the usb port ect (maybe back to the psu and
blow that as well then you will get smoke ect..) -
HI tv ad,, i got the same problem on my duo somtime back using an older version 2.2.1
of the vix image as the new 1 gave me a pain in the butt
some people might not call these 3 files a codec /addon, whatever
and it solved my problem i think cazuela posted them...
let me know how you on
best of luck...gst-plugin-avi_0.10.30-r0.1_mipsel.ipk
gst-plugin-flv_0.10.30-r0.1_mipsel.ipk
gst-plugin-rtsp_0.10.30-r0.1_mipsel.ipk -
If you dont mind me asking why have you 2 identical (same caid:ident) cards.
would one not suffice/do..?? -
you never replied nor thanked to say you got it going LOL
-
You might try this m8 happened to me
Go to example.. http://192.168.1.xx:8888/config.html, oscam config
read down a few line and you will see unlock parental make sure its
says yes -
Is the dm500 C (for terrestrial/cable)
The 500 S version is for satellite -
Maybe it could be the fact that the omnikey can do a lot then just
sat card readers, maybe the market is flooded? that would keep the price down lol -
Why don't you use a backup already made from the lads from this site as they are excellent ,
and modify if needed eg listen port passwords ect
LOOK HERE Forum Gateway - Powered by DnP Firewall
then if you have problems ask??
best of luck LOL -
omnikey 3121 best all rounder with good ecm times ck sponsor about £10 a pop
-
hi this is all you should need after sudo apt-get install opensc pcscd
no need to go through ,,,opensc-tool ?list-readers ect if all is being recognised.
[reader]
label = your card
protocol = pcsc
device = 0
caid = 09xx
detect= cd
group = 1
caid = 0xxx
i found this normally is all you need for 1 omnikey -
you need to flash the image to the dm using rs232 lead and dreamup. (had this a few times)
look here http://linuxsat-support.com/en…ked-up-image-dreamup.html -
Update twimc....the problem was in the oscam config menu http://192.168.1.xx:8888/config.html
parental unlock=1, it automatically changed my oscam config to suit on reboot...
