I confirm that works 100% on sunray vu+ solo2 followed the tutorial replaced files and manually installed ipk from vu control center
Posts by tekkken1979
-
-
I was given a dm800 to have a look at and see if I can get it working.
It was flashed with a gen image instead of clone image. The box said no ca found so I have put dreamup patched version and now the box says in serial mode.
Where do I go from here IE : DO I NEED BOOT LOADEDR /OR FLASH WITH A IMAGE WHICH ONE. How do I find what sim it is etc.i also have done exactly like u how i fixed ?
--- what u need---..
1. dreamup patched software
2. bootloader and exactly image for the box mine was ssl84b sim201
3. nullmodem cable search on google null modem for dreambox first scheme on google image is good
4. the box connected with rj45 cable and a computer with rs232 port ... usb2seriall is not always good for this operations
5. box and pc connected with network cable must be on ip like this ... 192.168.1.67 this is an example
7. open dreamup patched press connect insert power cable if u see the bootloader is uploadin ur on the wright track
8. press flash u will be asked to search ur .nfi image....
9. even if u get an error crc check error box will be unusable that's ok
10. remove and reinsert power cable pressing power button from the front of the box until stop appear
11. write the ip adress that box has shouw on the box display, on a web browser
12. flash again the image i do this steb because the boot image, that picture was black after i flashed again from browser the box WAS UNBRICKED -
cd /var
ls #this command shows all folder check if u have www folder then
chmod 755 www
then transfer over ftp -
Hi, I am trying to get multics to work, I have it connected to oscam and detecting my local card but when I connect to multics I get ECM nok for some reason.
Here is my config which I am sure it has something to do with that.
################################################## ########
## Files
################################################## ########FILE CHANNELINFO: "/var/etc/Cccam.channelinfo" ## default is disabled
FILE PROVIDERINFO: "/var/etc/CCcam.providers" ## default is disabled
FILE IP2COUNTRY: "/var/etc/ip2country.csv" ## default is disabled
FILE STYLESHEET: "/var/etc/multi.css" ## default is the built-in stylesheet file.
INCLUDE: "/var/etc/baddcw.cfg"
INCLUDE: "/var/etc/cache.cfg"
#INCLUDE: "/var/etc/multics.cfg"
TESTCHANNEL: 0500:032830:2206
################################################## ########
## WEB INTERFACE
################################################## ########HTTP PORT: xxxx
#web user/pass protection
HTTP USER: xxxxx
HTTP PASS: xxxxx
HTTP TITLE: "MCSSERVER"
HTTP EDITOR: ON ## Show editor page (default: ON)
HTTP RESTART: ON ## Show restart button/page (default: ON)
HTTP AUTOREFRESH: 5000 ## Default autorefresh for webpages in milliseconds (default: 10000 ~ 10s)################################################## ########
## CLUSTERED CACHE (Compatible with CSP cache)
################################################## ########CACHE PORT: 1234 # cache listen port(udp)
CACHE TIMEOUT: 100 # timeout to wait dcw from cache servers if a cacherequest was received.
ACCEPT NULL ONID: 0 # accept/block cache requests with networkid=0 (by default = 1)
CACHE TRACKER: 0
CACHE AUTOADD: no
CACHE ALIVETIME: 8
################################################## ########
## SERVERS CONNECTIONS (CCCAM+NEWCAMD+MGCAMD)
################################################## ########
## CCcam Client version
CCCAM VERSION: 2.1.1 # Select cccam client version "2.0.11", "2.1.1", "2.1.2", "2.1.3" (default: 2.0.11)## Change you clientid (in hex) by default it is Generic
NEWCAMD CLIENTID: 4343 # Mgcamd(6D67).newcs(6E73).Evocamd(6576).CCcam(4343) ...N: mydns.dyndns.tv port user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#C: localhost 23000 user pass 2
################################################## ########
## USR
################################################## ########
## Default des-key for all profiles
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14## Global Users, must be defined before the first profile
USER: test test { checkdcw=yes } # for all profiles################################################## ########
## PROFILES DEFAULT VALUES
################################################## ########## BAD DCW
## default profile options
DEFAULT KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
DEFAULT DCW TIME: 0
DEFAULT DCW TIMEOUT: 3500
DEFAULT SERVER MAX: 0
DEFAULT SERVER FIRST: 2
DEFAULT SERVER INTERVAL: 100
DEFAULT SERVER TIMEOUT: 4500
DEFAULT RETRY NEWCAMD: 3
DEFAULT RETRY CCCAM: 10
DEFAULT CACHE TIMEOUT: 100
DEFAULT DCW CHECK: 1
DEFAULT DISABLE CCCAM: NO
DEFAULT DISABLE NEWCAMD: NO
DEFAULT DISABLE RADEGAST: YES
DEFAULT DISABLE CACHE: NO
DEFAULT DISABLE CACHEEX: YES
DEFAULT CCCAM CHECKDCW: YES
DEFAULT MGCAMD CHECKDCW: YES
DEFAULT NEWCAMD CHECKDCW: YES########################################
[*** UK ] By Tiesto.multics.info
########################################
PORT: 8000
CAID: 0963
PROVIDERS: 000000
ONID: 2
DCW TIMEOUT: 550
SERVER TIMEOUT: 280
SERVER VALIDECMTIME: 500
RETRY NEWCAMD: 3
RETRY CCCAM: 3
ACCEPT NULL SID: 0
ACCEPT NULL PROVIDER: 1
CACHE TIMEOUT: 100
DCW SWAP: YES
DCW HALFNULLED: YES
#USER: test testHope someone can help me out with this one.
and where is the sid deny list ? profile is wrong
-
use addon for firefox it gives u unlimied lives and much more and our game stats it's working on facebook :D
-
just blind scan the satellite mate easyest way or u can add few tp manually and scan with nit activated
-
can someone tell me how to install openelec on vigica some info tutorial pls ???
-
chmod 777 multics.x32 or 64