cayoenrique here is TVHeadend bro, thanks,... trust me I´m not mad at you, I´m mad to the manufacture who left us alone in the dark and never gave us a proper solution.
this was the rigth command to get the tvheadend:
#tar cvpfz /storage/sdcard/tvheadend.tgz /system/tvheadend
Display MoreHEHEHE Listen, I had build many many programs in my life including kernels. But the truth is that I am no expert and always learning but very slow.
In this project I done all sort of weird experiments. In fact as I all ready told DANNYPS4 that my builds will not be doing TV as I had disabled most of the stuff. Why?, because I only intended to see if my builds at least do start running in his device, So I only wanted to see if webif got up and running. Why again? Because I do not have the Real TV Box so I only can emulate and hope for the best.
What are for?
CFLAGS="-fPIE"
LDFLAGS="-fPIE -pie"
I am not upset nor trying to upset you. I will help you as best as I can as long I have time at home. I guess I am some how free at the moment do not know in the future.
I hope fegol new oscam do work for you.
I still here learning a lot at home. See let me be honest. In my own project I want my PCSAT USB card to bee hook to an old Android phone, instead of my PC as the phone Power load is minimal compare to the PC!!!
So All I am doing with you is just a pre-learning experience against my own project.
Ok you told me you had found where we think the program binaries are at:
root@u5pvr-debian:~# ls -la /system
drwxr-xr-x 2 root root 4096 Jan 1 1970 oscam <----- oscam is here
drwxr-xr-x 5 root root 4096 Jan 1 1970 tvheadend <------tvheaded is here
Thanks, that info is good to know also. But the important is where the configs are located and if you can zipped them and send them to me by PM. You can delete all private info like keys I do not need them. But oscam hts configs in general.
Normally android store app data in /data/data. You can do ls -ls /data/data and you will see what is in there. But I mention that tvheadend like to store its data in ".hts" folder
we are looking for a folder called: tvheadend ot tvh ot hts or ".hts" with the dot. I did show you other possibilities where it can be located:
#ls -la /data
#ls -la /data/data
But from the image you just posted about oscam I can also figure that you had oscan config in /storage/sdcard/OSEbuild/OSCam. So more possibilities like
#ls -la /storage/sdcard/
#ls -la /storage/sdcard/OSEbuild/
#ls -la /storage/sdcard/OSEbuild/OSCam
So do me a favor do
#su
#tar cvpfz /storage/sdcard/OSEbuild.tgz /storage/sdcard/OSEbuild
#tar cvpfz /storage/sdcard/hts.tgz s/data/data/.hts
where "/data/data/.hts" is our asume location the data files of tvheadend files. Adjust as necesarry.
Then send me the file via PM. You can always passwrd the file using zip and upload them to an place you like like tinnyupload.
uploading my OSCAM confi files, the TVHeadend is a bit heavy and is taking a while to complete.
once done I will also posted.
Display MoreHEHEHE Listen, I had build many many programs in my life including kernels. But the truth is that I am no expert and always learning but very slow.
In this project I done all sort of weird experiments. In fact as I all ready told DANNYPS4 that my builds will not be doing TV as I had disabled most of the stuff. Why?, because I only intended to see if my builds at least do start running in his device, So I only wanted to see if webif got up and running. Why again? Because I do not have the Real TV Box so I only can emulate and hope for the best.
What are for?
CFLAGS="-fPIE"
LDFLAGS="-fPIE -pie"
I am not upset nor trying to upset you. I will help you as best as I can as long I have time at home. I guess I am some how free at the moment do not know in the future.
I hope fegol new oscam do work for you.
I still here learning a lot at home. See let me be honest. In my own project I want my PCSAT USB card to bee hook to an old Android phone, instead of my PC as the phone Power load is minimal compare to the PC!!!
So All I am doing with you is just a pre-learning experience against my own project.
Ok you told me you had found where we think the program binaries are at:
root@u5pvr-debian:~# ls -la /system
drwxr-xr-x 2 root root 4096 Jan 1 1970 oscam <----- oscam is here
drwxr-xr-x 5 root root 4096 Jan 1 1970 tvheadend <------tvheaded is here
Thanks, that info is good to know also. But the important is where the configs are located and if you can zipped them and send them to me by PM. You can delete all private info like keys I do not need them. But oscam hts configs in general.
Normally android store app data in /data/data. You can do ls -ls /data/data and you will see what is in there. But I mention that tvheadend like to store its data in ".hts" folder
we are looking for a folder called: tvheadend ot tvh ot hts or ".hts" with the dot. I did show you other possibilities where it can be located:
#ls -la /data
#ls -la /data/data
But from the image you just posted about oscam I can also figure that you had oscan config in /storage/sdcard/OSEbuild/OSCam. So more possibilities like
#ls -la /storage/sdcard/
#ls -la /storage/sdcard/OSEbuild/
#ls -la /storage/sdcard/OSEbuild/OSCam
So do me a favor do
#su
#tar cvpfz /storage/sdcard/OSEbuild.tgz /storage/sdcard/OSEbuild
#tar cvpfz /storage/sdcard/hts.tgz s/data/data/.hts
where "/data/data/.hts" is our asume location the data files of tvheadend files. Adjust as necesarry.
Then send me the file via PM. You can always passwrd the file using zip and upload them to an place you like like tinnyupload.
Display MoreDisplay Moreanswering one question at the time, this OSCAM build is what we need, however doesn´t have the EMU reader for powervu...
OSCAM log:
- 2018/08/24 22:29:44 37A861D6 c (client) plain dvbapi-client granted (anonymous, au=off)
- 2018/08/24 22:29:44 37A861D6 c (dvbapi) dvbapi channelcache loaded from /storage/sdcard/OSEbuild/OSCam/conf/oscam.ccache
- 2018/08/24 22:29:44 37A861D6 c (dvbapi) Detected Hisilicon{1}. <-- this is a good sign
This is another one, is working and DVBAPI also is found....
this is the list of commands I use to compile for android OSCAM but does not work for my box:
fegol can you share your method?? so we wont bother you in the future... Thanks
sudo apt-get update
sudo apt-get install subversion
API="21"
TOOLCHAIN=`pwd`/arm-linux-androideabi
wget https://dl.google.com/android/repository/android-ndk-r17b-linux-x86_64.zip
unzip android-ndk-r17b-linux-x86_64.zip
./android-ndk-r17b/build/tools/make_standalone_toolchain.py --arch arm --api ${API} --install-dir ${TOOLCHAIN}
export PATH=${TOOLCHAIN}/bin:$PATH
export CROSS_SYSROOT=${TOOLCHAIN}/sysroot
CROSS=${TOOLCHAIN}/bin/arm-linux-androideabi-
export PKG_CONFIG_PATH=${CROSS_SYSROOT}/usr/lib/pkgconfig
export CFLAGS="-Os -D__ANDROID_API__=${API} -march=armv7l -mfloat-abi=softfp -mfpu=vfpv3-d16 -fPIE"
export LDFLAGS="-march=armv7l -Wl,--fix-cortex-a8 -fPIE -pie"
wget http://www.openssl.org/source/openssl-1.0.1h.tar.gz
tar -xf openssl-1.0.1h.tar.gz
cd openssl-1.0.1h
CC=${CROSS}gcc LD=${CROSS}ld AR=${CROSS}ar STRIP=${CROSS}strip RANLIB=${CROSS}ranlib ./Configure android -march=armv7l --prefix=${CROSS_SYSROOT}/usr -D__ANDROID_API__=${API}
make install
cd ../
svn checkout http://www.streamboard.tv/svn/oscam/trunk oscam-svn
#wget https://raw.githubusercontent.com/oscam-emu/oscam-emu/master/oscam-emu.patch
cd oscam-svn
#patch -p0 < ../oscam-emu.patch
#make config
./config.sh --disable WITH_SSL CARDREADER_DB2COM
make android-arm CROSS=${CROSS} USE_LIBCRYPTO=12 years ago I bought the original Wetek Play as the idea to combine Android and E2 really attracted me. I ended up abandoning the box as it was too slow and too buggy compared to my e2 boxes. It seems the new gen combo boxes are now very interesting. I was looking this afternoon at the A5 combo as well as the Gemma H9S. The H9S seems to support multistream (interesting for me as I use it to watch French tv channels on 5W sat). On the other hand i read marvels about the A5 combo, that almost gives you an e2 experience on the android. Anyone compared the two boxes?
Dinobot 4k plus is the one I would suggest, because of the 2gb of DDR4, make it faster than any of the competitors
Display MoreOnce I see a zipped files of both your oscam and tvheadend i will be able to have a better Idea. But I was reading again the forum and I realize that in
CodeDisplay More[dvbapi] enabled = 1 au = 1 pmt_mode = 4 listen_port = 2000 delayer = 60 ecminfo_type = 1 user = pvu read_sdt = 1 write_sdt_prov = 1 extended_cw_api = 1 boxtype = pc
See you can see
Codeextended_cw_api = 1
That can give us an Idea if your old tvheadend do in fact have extended_cw_api
answering this question:
– TVHeadend Server # 1 (ver 3.2 custom) and if I access it thru the web interface there is no option to enable or disable extended_cw_api like with the other tvheadend which is 4.1, but this one doesn´t manage the tuners.
Display MoreFego oscam file. do not work for me as ot is not static compilation. It depends in libraries I do not have. Well maybe if I copy the libraries from sdk who knows.
CodeDisplay Moreuser@debian-armel:~$ ./oscamfegol.sh Starting Oscam... ./oscamfegol.sh: 8: ./oscamfegol.sh: /home/user/oscam/oscamfegol: not found user@debian-armel:~$ user@debian-armel:~$ file /home/user/oscam/oscamfegol /home/user/oscam/oscamfegol: ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked (uses shared libs), stripped user@debian-armel:~$ objdump -x /home/user/oscam/oscamfegol | grep NEEDED NEEDED libhi_msp.so NEEDED libhi_common.so NEEDED libm.so NEEDED libdl.so NEEDED libc.so
Here is my latest. Test it. But report in steps.
Tell me if execute.
Any errors.
is the webif running
finally if it connects to tvheadend.
Please also tell me what program you use to watch tv?
How is the Play list composed?
Do you have VLC install?
ok, this oscam bin doesn´t work, is not like the first one you shared, my box doesn´t recognize it and it wont start...
this box has an apk built by the manufature, is called eON tv, this app connects to the TVheadend #1, and yes I do have VLC installed but for my other videos and stuff...
if path to oscam is located at /system the you can try to locate tvheadend at
- #ls -la /system
Hope you can find the configs.
answering this question, here is the tvheadend...
root@u5pvr-debian:~# ls -la /system
total 100
drwxr-xr-x 20 root root 4096 Jan 1 1970 .
drwxr-xr-x 24 root root 4096 Aug 23 2017 ..
drwxr-xr-x 61 root root 4096 Jul 13 2017 app
drwxr-xr-x 2 root root 4096 Jan 1 1970 backuprestore
drwxr-xr-x 4 root aid_shell 4096 Aug 24 00:53 bin
-rw-r--r-- 1 root root 4240 Aug 1 2008 build.prop
drwxr-xr-x 11 root aid_shell 4096 Aug 24 00:53 etc
drwxr-xr-x 2 root root 4096 Jan 1 1970 fonts
drwxr-xr-x 2 root root 4096 Jan 1 1970 framework
drwxr-xr-x 8 root root 12288 Jul 28 2017 lib
drwx------ 2 root root 4096 Jan 1 1970 lost+found
drwxr-xr-x 4 root root 4096 Jan 1 1970 media
drwxr-xr-x 2 root root 4096 Jan 1 1970 oscam <----- oscam is here
drwxr-xr-x 42 root root 4096 Jan 1 1970 priv-app
drwxr-xr-x 3 root root 4096 Jan 1 1970 samba
drwxr-xr-x 3 root root 4096 Jan 1 1970 tts
drwxr-xr-x 2 root root 4096 Jan 1 1970 ttx
drwxr-xr-x 5 root root 4096 Jan 1 1970 tvheadend <------tvheaded is here
drwxr-xr-x 7 root root 4096 Jan 1 1970 usr
drwxr-xr-x 3 root root 4096 Jan 1 1970 vendor
drwxr-xr-x 2 root aid_shell 8192 Aug 24 00:53 xbin
answering one question at the time, this OSCAM build is what we need, however doesn´t have the EMU reader for powervu...
OSCAM log:
sorry to both of you, I am working rigth now and I will be home like in 2 or 3 hours to give you all an update...
both of you have done an awesome job.
bear with me a bit,
answering your questions:
- From post (#23):
What I need then(post (#24):
Your oscam config folder and its location. ----> /data/oscam
Your tvheadend location and a copy of your config. Go to webif by: ---> pending I will answer once I get home.
Display More
If the SD card is inserted ... and is an Enigma2 image ... this menu appear
and user can choose the system he want to boot !
Amiko A5 OpenATV Enigma2 demo movie :
I hope to see better performance, because this zapping seems very slow for a 2gb of ram...
Display MoreOK.
Please get out of the easy people way of speak normally they ONLY say "...but it doe not work."
I think I need more info to understand the problem. I need you to be more expressive in your answer. Treat me like a child. One thing is Logs reports. Another thing oscam build do not execute. Lets keep the issues apart.
A)Lets start from explaining the original situation without any update.
My recolation is
Lets start from explaining the original situation without any of my files suggestion.
what everybody I know with this box needs is the hability to be capable to build our own OSCAM bin without depending from the manufacturer, because they have turn the wheel to another direction, they moved from Android to Enigma2 now...
so, the current OSCAM, the one we are using, they that comes with the box is old, it does have PowerVU support and other things, but for example, power is getting patch every once in a while, we have not been able to keep the same rythim as everybody with other boxes, currently OSCAM is getting patch for nagra CAK7, we are not going to be able to get that patch, because as of today, there is no way possible to create our own OSCAM.
so, you build, the box was capable to see, but if I tune a channel, your OSCAM bin won't do anything, because there is no comunication with your bin and the tuner, the DVBAPI is the link, is the bridge between both, the tuner and the software portion which is the bin.
so if I get DVBAPI not dectected the bin wont work at all, there is no log, there is nothing more, that's is the log, the DVBAPI i not connecting.
Display MoreThanks for busybox. That was to have a REAL Statically build program that I can use to test my emulation. So we now my emulation works. But I do not need that any more, I am pretty sure I did a OSCAM that can run in your device.
But that why have not you report the result!!! That is the main Objective of this thread. To have a recent oscam that can play in your device.
Common download home.tar.xz from post 15 and tell me if it work!!!!!
https://linuxsat-support.com/cms/attachment/103455-home-tar-xz/
I am waiting...... still waiting.... hehehehe I am joking.
I will definitely will wait your response.
yes I was able to make the box initiate the OSCAM however I get this:
(dvbapi) dvbapi channelcache loaded from /storage/sdcard/OSEbuild/OSCam/conf/oscam.ccache
(dvbapi) ERROR: Could not detect DVBAPI version.
as you may know already, without DVBAPI the oscam is usesless
I had to manually grap it from system/xbin
I can´t move forward from here, the box is rooted, but doesn´t have busybox, I just install it from the playstore and still no go
probably I miss typed something, I just tried again and I´m getting this:
root@gbquad:~# busybox --help
BusyBox v1.27.2 (2018-05-01 10:05:01 CEST) multi-call binary.
BusyBox is copyrighted by many authors between 1998-2015.
Licensed under GPLv2. See source distribution for detailed
copyright notices.
Usage: busybox [function [arguments]...]
or: busybox --list
or: function [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as.
Currently defined functions:
[, [[, addgroup, adduser, ar, arp, arping, ash, awk, base64, basename, blkid, bunzip2, bzcat, cat, chattr, chgrp, chmod,
chown, chroot, chrt, clear, cmp, cp, cttyhack, cut, date, dc, dd, delgroup, deluser, devmem, df, diff, dirname, dmesg,
dnsdomainname, dos2unix, du, echo, egrep, eject, env, ether-wake, expr, factor, fatattr, fbset, fgrep, find, fsck,
fstrim, fuser, getopt, getty, grep, groups, gunzip, gzip, hdparm, head, hostname, i2cdetect, i2cdump, i2cget, i2cset,
id, ifconfig, ifdown, ifplugd, ifup, inetd, inotifyd, ionice, ip, ipneigh, kill, killall, killall5, klogd, less, link,
ln, loadkmap, logger, logname, logread, losetup, ls, lsattr, lsof, lspci, lsusb, lzcat, md5sum, mdev, mkdir, mkfifo,
mknod, mkswap, mktemp, more, mount, mpstat, mv, nc, netstat, nice, nl, nohup, nproc, nslookup, ntpd, od, partprobe,
paste, patch, printf, pwd, rdev, readlink, readprofile, realpath, renice, reset, resize, rfkill, rm, rmdir, route,
run-parts, sed, seq, setconsole, setlogcons, setserial, setsid, sh, sha1sum, sha256sum, sha3sum, sha512sum, shred, shuf,
sleep, sort, start-stop-daemon, stat, strings, stty, sulogin, swapoff, swapon, switch_root, sync, sysctl, syslogd, tail,
tar, taskset, tee, telnet, telnetd, test, tftp, tftpd, time, timeout, top, touch, tr, truncate, tty, tunctl, udhcpc,
uevent, umount, uname, uniq, unix2dos, unlink, unxz, unzip, uptime, users, usleep, vi, volname, w, watch, wc, which,
who, whoami, whois, xargs, xxd, xzcat, yes, zcat
Display MoreYou said that the device was rooted. Normally when a device is rooted, the program used will install busybox. So If you are rooted it will be there.
Now did you try
whereis busybox
In any case me find another static linked program.
I get this:
root@gbquad:~# whereis busybox
busybox: /bin/busybox.suid /bin/busybox.nosuid /bin/busybox
Display MoreNONO I want busybox binary. do:
Irst chech that you have it
#busybox --help
then
#whereis busybox
The location should display. Please copy it zip it and post here.
this is what I get:
root@u5pvr-debian:~# busybox --help
-bash: busybox: command not found
here, the config directory is /data/oscam
Thanks for the effort.
to give more tips about this box, under the hood of it you have running at the same time debian linux, tvheadend#1 for your normal tv decoding and TVheadend #2 which is usesless, it doesn do anything, and if you reboot the box and have an sdcard with E2 in it, you will be able to boot into E2, but if I wanted to use E2, I would have kept my Gigablue or any Dreambox
