error while loading shared libraries: libcrypto.so.0.9.8
opkg update && opkg list | grep libssl
opkg install libssl0.9.8
Works for me ;)
error while loading shared libraries: libcrypto.so.0.9.8
opkg update && opkg list | grep libssl
opkg install libssl0.9.8
Works for me ;)
I have a few questions for my Vu duo2 4k reciever
- Is it posseble to watch t2-mi streams with tuner dvbs nm 45308x fbc dvbs2
Earlier i have try opkg install astra-sm but no luck..
- Looking for driver tbs box 5520SE to use with vu
- Tbs 5520SE box have a cable with y 2 usb connectors
- From the y cable i use 1 connector or both and why ?
- Have try to install dvb-usb-tbs from driver menu but
my reciever don`t see the tbs 5520SE box
- Can you help me to make it work ?
Thx for advice..
Hi all,
I have a problem with multistream Yamai 55 east with Vuduo2 and satdream image,
Need help from the config files to make it work, pls
Thanks..
Its better to use cccam file for ccam and switch cccam to oscam with the ipkg installer for enigma 2
First try to connect Oscam or Socam-emu with webinterface lanadres:8888 or 8081 to connect with webinterfaces
Then save the rights to 755 chmod 755 /etc/tuxbox/config.*
Start the Oscam wizzart to make emu if you want Status -> Reader add reader protocol Emu with config files (look at the forum for example)
Also when you finish Add reader protocol cccam thats the protocol to read c lines
Example Add Protocol cccamreader discr cccam adres , divice cccam adres group 1 lb 100 save emm unique share global , block unknown
Inactivity,reconnect,request timeout 40 sec maxhop 3, reshare -1 want emu 0 , keepalive 1 Read tiny.cc/v1ppfz
Download, rename then new version as oscam and restart emu with menu in /usr/bin/ file
Then you could see the new verion in the webinterface..
Oscam 11517 emu also works for openpli 7 vusolo duo 4k ;)
Afn works also with the keyupdater ;)
Aanpassing Oscam configuratie Opendroide Vu image
Op de download site voor de cam`s (blauwe knop vu) zag ik dat de site was verdwenen..
Op linuxsat had ik een oscam ipk geprobeerd maar verschillende versies werkte niet op mijn vu duo.
Cccam werkte wel in de cammanager vanwege het config bestand in de cammanager en heb dit aangepast
voor de oscam keuze met de volgende stappen procedure. Het oscam config bestand in /etc/tuxbox/config plaatsen
- Rechten heb ik aan gepast (telnet lanadress passwd = root ingelogd chmod 755 /etc/tuxbox/config.*
- Eerst Oscam emu downloaden uitpakken en renamen naar oscam. Dan in /usr/bin/ directery plaatsen
(oscam-svn11508-794-arm_dm900-solo4k-webif-oscam-emu-patched.tar.gz ) (oscam.dreamosat.net)
- Dan het start stop script plaatsen in /etc/ directery bij het Opendroide image
- Startscript voor softcams
########################################
###### Powered by Ger ######
########################################
emuname = Oscam-Latest
binname = oscam
startcam = /usr/bin/oscam -d -c /etc/
stopcam = killall -9 oscam
- Script opslaan als Oscam-Latest.emu en ftp naar de vu box in de /etc directery
- Telnet lanadres vu passwd root chmod 755 /etc/Oscam-Latest.emu
- Nu kan ik in de cammanager kiezen tussen oscam en cc cam
telnet into the box and do chmod 755 enigma2-plugin-cams-oscam-emu-svn10656_openatv_all.ipk
then opkg install enigma2-plugin-cams-oscam-emu-svn10656_openatv_all.ipk
in telnet and reboot box with reboot command
Must be working ;)
If not, then your oscam version is not compatenble with the box image