Hvala, ali voleo bih da imam zvaničnu uslugu. Plati za to i nema grešaka.
Posts by maneldascoubes
-
-
Pozdrav balkanski prijatelji! Stvarno mi treba pomoć nekoga tko živi u jednoj od ovih zemalja. Htio sam se pridružiti ArenaSport kanalima, ali sam dosta tražio po internetu i ne mogu. satelitom ne mogu naći nikoga tko prodaje maxtv ili m:telsat prepaid kartice a OTT platforme traže broj telefona iz tih zemalja. Može li mi netko pomoći kupiti satelitsku karticu s kanalima ili mi pomoći da se pridružim ArenaCloudu ili nekom drugom servisu koji ima te kanale. Hvala vam puno unaprijed! Oprostite, koristim prevoditelj. Govorim samo španjolski i engleski
-
I thought OpenVix 6.2 was python 2.7. With the Image TeamBlue 6.4 AutoBissKey works well
OpenViX 6.2 is python 3 - OE-A 5.0 core.
teamBlue 6.4 is python 2.7 - OE-A 4.4.
what about the error in the teamblue image? what is the problem? have a solution? If I copy the data from the feed and manually search in reception menu, I find the feeds. Maybe some bug in the plugin -
It also does not work with the latest version of OPENVIX in a GIGABLUE UE 4K. Only works well with OpenATV
In openvix, after installation the PLUGIN does not appear in the list. Neither this nor u AutoBissKey
Both plugins havn`t been modified for python 3 images yet.
Go back to using old python 2.7 images.
Thank you. I thought OpenVix 6.2 was python 2.7. With the Image TeamBlue 6.4 AutoBissKey works well, but FeedFinder crashes. When I start searching, the following error appears
Satellite names do not appear, and when loading on search blue screen appears
-
It also does not work with the latest version of OPENVIX in a GIGABLUE UE 4K. Only works well with OpenATV
In openvix, after installation the PLUGIN does not appear in the list. Neither this nor u AutoBissKey
-
Key 00 : FE 4E DC 54 49 89 03
-
Is it not possible to use this plugin with the Teamblue image?
the box always crashes when i try to search any feed. With other images, this problem never happens. -
Hi!
Does anyone know what happened with Arena Sport channels in Tandberg that were on Satellite 1.9E?
Have they left permanently or temporarily?
-
Hello friend, the answer is no, you have many plat on net same size for same price and new.....
Thank you so much for the answer. This is a really good price. Actually I only need 120cm, I don't know if 140cm is too much for my diseqc motor. The motor is on the ground, not a loot of wind.
One more question about this 140 cm Televes antenna. This model is offset, right? And not even an actuator motor works with her, right?
Thanks in advance
-
Ps.
My disecq motor supports 17kg.
This dish have 13/14kg.
-
Should I buy? The price is 100€
-
Hi.
Someone wants to sell this antenna for me on the internet.
Its strange, dimensions are 140cm x 140cm Televes brand. I can't find anything about this dish on internet. The material is aluminum.
Do you think this will work with my usals/diseqc motor? Or it seems to be a fixed antenna and I can't use motor?
-
Works also on 13° east Tnt france ?
No. Only 19.2 East.
-
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.
I dont Know how i can have 2 oscam-emu at the same time.
Now in my main image only have Oscam_11.685-r798 (Powervu, biss, tand works)
Via openmultiboot i have a 2nd image with this TNT emu running, but I would like to have everything working in one image.
*** On OpenPLI mips ***
Go to
/etc/init.d
Creat : softcam.SURPRISE (chmod 755) with the content below
*****************************************************
#!/bin/sh
case "$1" in
start)
ulimit -s 1024
/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise--daemon --pidfile /tmp/surprise.pid --restart 2 --utf8
/usr/bin/oscam --config-dir /etc/tuxbox/config/Oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
;;
stop)
kill `cat /tmp/surprise.pid` 2> /dev/null
kill `cat /tmp/oscam.pid` 2> /dev/null
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "SURPRISE"
;;
info)
echo "SURPRISE"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
*****************************************************
Yellow : the direction of your bin files (chmod 755)
Red : the direction of your config files
Works in OpenAtv 6.4 too!
Is there a way to automatically switch from oscam-emu to surprise when I choose tnt channels?
(Autocam is that?) Cant find this plugin on openatv
-
Try this command:
/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise --daemon --pidfile /tmp/surprise.pid --restart 2 --utf8
if screen stay black, just run /usr/bin/oscam-surprise to display messages.
I get this error
opkg install libusb-1.0-0
Clear!
Thank you so much!
-
Try this command:
/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise --daemon --pidfile /tmp/surprise.pid --restart 2 --utf8
if screen stay black, just run /usr/bin/oscam-surprise to display messages.
I get this error
-
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.
I dont Know how i can have 2 oscam-emu at the same time.
Now in my main image only have Oscam_11.685-r798 (Powervu, biss, tand works)
Via openmultiboot i have a 2nd image with this TNT emu running, but I would like to have everything working in one image.
*** On OpenPLI mips ***
Go to
/etc/init.d
Creat : softcam.SURPRISE (chmod 775) with the content below
*****************************************************
#!/bin/sh
case "$1" in
start)
ulimit -s 1024
/usr/bin/oscam-surprise --config-dir /etc/tuxbox/config/Surprise--daemon --pidfile /tmp/surprise.pid --restart 2 --utf8
/usr/bin/oscam --config-dir /etc/tuxbox/config/Oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
;;
stop)
kill `cat /tmp/surprise.pid` 2> /dev/null
kill `cat /tmp/oscam.pid` 2> /dev/null
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "SURPRISE"
;;
info)
echo "SURPRISE"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
*****************************************************
Yellow : the direction of your bin files (chmod 775)
Red : the direction of your config files
Thank you, for your help!!
Well, i tried your solution, but the TNT channels keep black.
Please verify my attachments
-
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
just run oscam-tntsat and oscam-emu (with powervu) separately, you will have 2 oscam process, don't forget to set pmt_mode to 6.
I dont Know how i can have 2 oscam-emu at the same time.
Now in my main image only have Oscam_11.685-r798 (Powervu, biss, tand works)
Via openmultiboot i have a 2nd image with this TNT emu running, but I would like to have everything working in one image.
-
Oscam EMU Mipsel arch for Tnt 19.2 E
by juli13
Works very well.
The problem is: for have tnt, I lose biss, tandberg and powervu :(
-
version mips ( last revision )
config is easy only oscam.conf / oscam.user
Can I use it in my vu uno hd, with atv 6.4?
Dont need to install lib files?