With the great help from Jokosat I have resolved this loading loading a c line issue.
Really appreciate the assistance and time given.
Thanks all
TheCeltictiger
With the great help from Jokosat I have resolved this loading loading a c line issue.
Really appreciate the assistance and time given.
Thanks all
TheCeltictiger
try lavatronics its there botched up lets pretend its a vix image
also biggest clue is cccam does not and never will work on the alien2
using an EMU emulator you can get CCcam to work. I already have it running on another Amiko Alien2
Hi All,
I looking for assistance to get a cline running as it is wrecking my head at this stage.
I have loaded Enigma 2 Vix4blue image. I then ftp'd to the box and installed softcams to var/emu and added CCcam.cfg to var/keys. I edited the CCcam.cfg file with my cline details.
Returning to the Vix4blue setting I go to the Softcam manager settings and start CCcam and is showing as active but I do not get any premium service picture.
I really am at a loss why I am not getting picture. Any advise or suggestions to fix this is appreciated as I have been at this for the last two days and my missus is threatening to f#ck the box out the window ( and me with it)
Again any help is appreciated
Regards,
TheCeltictiger
Presumably both boxes are connecting to a remote server - one box will kick the other off if you use the same C Line on both at the same time => freezing.
How is each box connected to the internet (eg. wired or wirelessly)?
Try running Oscam on the Fergusson and see if that freezes too.
I have a multiroom C line connection so the freezing would not have been down to the server provider.
I did some more trawling through the sat forums and I ended up adding a cccam EMU onto the receiver and after loading the C line details and a reboot running cccam it seems to have fixed the issue. I have been watching SSP1 for over 10 mins without a lag.
I will continue to monitor it but fingers crossed this might just have sorted it
dont use ccam much in the alien2 but last time i used these settings
Thanks for the suggestion but sections but unfortunately I had the same result of picture freezing for a few seconds every 30-40 secs
Any other suggestions are greatly appreciated.
Are you having problems with a local card, or the cccam connectio?
The problem is with the cccam connection
Hi there,
I am looking for some assistance resolving a channel freeze issue that I have running oscam on my Amiko Alien2 receiver
I have another receiver in the house (Ferguson Ariva running on cccam) and I do not see any picture freeze issue so I know the my home broadband is ok and the C line that I am using is fine also.
Below are my oscam.server settings with my personal details removed.
Do these settings look ok or is there a change that might resolve by picture freeze issues ?
[reader]
label = cccam-reader
enable = 1
protocol = cccam
device = xxxxxx
user = xxxxxx
password = xxxxx
cccversion = 2.0.11
cccmaxhops = 3
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
keepalive = 1
[reader]
label = reader_down
enable = 0
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
group = 4
emmcache = 1,2,3
Here are my oscam.server settings (with private info removed)
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9524
# Read more: http://www.streamboard.tv/svn/…/doc/txt/oscam.server.txt
[reader]
label = cccam-reader
enable = 1
protocol = cccam
device = xxxxxx
user = xxxxxx
password = xxxxx
cccversion = 2.0.11
cccmaxhops = 3
group = 1
inactivitytimeout = 1
reconnecttimeout = 30
keepalive = 1
[reader]
label = reader_down
enable = 0
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
group = 4
emmcache = 1,2,3
- - - Updated - - -
Maybe also post the log (again removing private info...)
Can you tell me where i can pull the log data from. The log folder within the var directory is empty?
- - - Updated - - -
I am new to Linux sat receivers but I eventually figured out how to create a log file.
Soory for the lengthy copy/paste, but i do hope that this may shed some light on my picture freeze issue
+ (1) Background File Eraser
+ (5) Tuxtxt
+ (8) graphics acceleration manager
STMFB accel interface available
+ (9) GFBDC
15360k total video mem
7260k usable video mem
5640kB available for acceleration surfaces.
resolution: 720 x 576 x 32 (stride: 2880)
+ (9) gLCDDC
couldn't open LCD - load lcd.ko!
lcd buffer 0x773bc0 8448 bytes, stride 132
LCD resolution: 132 x 64 x 8 (stride: 132)
+ (9) Font Render Class
[FONT] initializing lib...
[FONT] loading fonts...
PYTHONPATH: /usr/lib/enigma2/python
[FONT] Intializing font cache, using max. 4MB...
+ (10) gRC
RC thread created successfully
+ (15) eWindowStyleManager
+ (20) DVB-CI UI
+ (20) UHF Modulator
couldnt open /dev/rfmod0!!!!
+ (20) RC Input layer
+ (20) misc options
+ (20) AVSwitch Driver
couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
+ (21) input device driver
EVIOCGRAB: Device or resource busy
Input device "fulan front panel buttons" is a remotecontrol
EVIOCGRAB: Device or resource busy
Input device "TDT RC event driver" is a remotecontrol
failed to open /dev/input/event2
Input device "" is a remotecontrol
failed to open /dev/input/event3
Input device "" is a remotecontrol
Found 4 input devices.
+ (22) Hdmi CEC driver
+ (30) eActionMap
+ (35) CI Slots
scanning for common interfaces..
eDVBCIInterfaces->setInputSource(0, 0)
eDVBCIInterfaces->setInputSource(1, 1)
done, found 0 common interface slots
+ (35) CA handler
+ (36) Stream server
[SERVERSOCKET] ERROR on bind() (Address already in use)
+ (40) eServiceCenter
settings instance.
+ (41) eServiceFactoryDVD
+ (41) eServiceFactoryEPlayer3
+ (41) eServiceFactoryM2TS
+ (41) eServiceFactoryMP3
+ (41) eServiceFactoryFS
+ (41) eServiceFactoryDVB
reached rl 70
---- opening lame channel db
reading services (version 4)
loaded 1046 services
scanning for frontends..
opening frontend 0
close frontend 0
opening frontend 1
failed! (/dev/dvb/adapter0/frontend1) Device or resource busy
opening frontend 2
close frontend 2
found 1 adapter, 2 frontends(2 sim) and 4 demux, boxtype 29
Use valid Linux Time :) (RTC?)
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
[ePNG] couldn't open /usr/local/share/enigma2/skin_default/spinner/wait10.png
found 9 spinner!
setIoPrio best-effort level 3 ok
Failed to open /dev/dbox/fp0
[Harddisk] enumerating block devices...
main thread is non-idle! display spinner!
Reading satellites.xml
Reading terrestrial.xml
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Tuner3-T/T2(T/T2/C), need rotorworkaround No, enabled Yes, DVB-S2 No
setSlotInfo for dvb frontend 2 to slotid 2, descr Tuner2-Sat, need rotorworkaround No, enabled Yes, DVB-S2 Yes
slot: 1 configmode: simple
diseqcmode: single
slot: 2 configmode: simple
diseqcmode: single
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv 1
loading bouquet... /etc/enigma2/userbouquet.c29c5.tv 1
64 entries in Bouquet userbouquet.c29c5.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs00.tv 65
495 entries in Bouquet userbouquet.ukcvs00.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs01.tv 541
124 entries in Bouquet userbouquet.ukcvs01.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs05.tv 664
28 entries in Bouquet userbouquet.ukcvs05.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs07.tv 691
28 entries in Bouquet userbouquet.ukcvs07.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs03.tv 718
30 entries in Bouquet userbouquet.ukcvs03.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs09.tv 747
30 entries in Bouquet userbouquet.ukcvs09.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs04.tv 776
31 entries in Bouquet userbouquet.ukcvs04.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs06.tv 806
23 entries in Bouquet userbouquet.ukcvs06.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs14.tv 828
275 entries in Bouquet userbouquet.ukcvs14.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs0b.tv 1085
23 entries in Bouquet userbouquet.ukcvs0b.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs08.tv 1107
16 entries in Bouquet userbouquet.ukcvs08.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs0a.tv 1122
29 entries in Bouquet userbouquet.ukcvs0a.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs10.tv 1150
238 entries in Bouquet userbouquet.ukcvs10.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs11.tv 1385
11 entries in Bouquet userbouquet.ukcvs11.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs0e.tv 1395
3 entries in Bouquet userbouquet.ukcvs0e.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs12.tv 1397
3 entries in Bouquet userbouquet.ukcvs12.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs15.tv 1399
35 entries in Bouquet userbouquet.ukcvs15.tv
loading bouquet... /etc/enigma2/userbouquet.ukcvs16.tv 1415
1 entries in Bouquet userbouquet.ukcvs16.tv
loading bouquet... /etc/enigma2/userbouquet.dbe1c.tv 1415
9 entries in Bouquet userbouquet.dbe1c.tv
loading bouquet... /etc/enigma2/userbouquet.dbe06.tv 1424
11 entries in Bouquet userbouquet.dbe06.tv
loading bouquet... /etc/enigma2/userbouquet.dbe15.tv 1435
9 entries in Bouquet userbouquet.dbe15.tv
loading bouquet... /etc/enigma2/userbouquet.dbe12.tv 1444
6 entries in Bouquet userbouquet.dbe12.tv
loading bouquet... /etc/enigma2/userbouquet.dbe14.tv 1450
30 entries in Bouquet userbouquet.dbe14.tv
loading bouquet... /etc/enigma2/userbouquet.dbe09.tv 1478
45 entries in Bouquet userbouquet.dbe09.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 1521
0 entries in Bouquet userbouquet.LastScanned.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv 1521
0 entries in Bouquet userbouquet.favourites.tv
27 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio 1
loading bouquet... /etc/enigma2/userbouquet.ukcvs00.radio 1
59 entries in Bouquet userbouquet.ukcvs00.radio
loading bouquet... /etc/enigma2/userbouquet.dbe00.radio 59
31 entries in Bouquet userbouquet.dbe00.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio 89
0 entries in Bouquet userbouquet.favourites.radio
3 entries in Bouquet bouquets.radio
3660kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5120)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...executing main
OK (Regular)
[FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/local/share/enigma2/PLi-HD/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
Selected keymap does not exist!
Activating language English
[ePopen] command: ip -o addr show dev eth0
[ePopen] command: ip -o addr show dev ra0
[ePopen] command: killall -9 daemon &
[ePopen] command: /bin/fp_control -l 0 0
Plugin Extensions/XBMCAddons failed to load: No module named XBMCAddons.plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/XBMCAddons
('[AutoTimer] Unable to initialize MPHelp:', ImportError('No module named MPHelp',), '- Help not available!')
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
setMode - port: HDMI mode: 720p rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
updateColor: HDMI
('[MediaPortal] fallback to default translation for', "The directory path does not end with '/':\n%s")
('[MediaPortal] fallback to default translation for', 'File with the same name exists in the directory path:\n%s')
('[MediaPortal] fallback to default translation for', 'The missing directory:\n%s could not be created!')
('[MediaPortal] fallback to default translation for', 'The directory path:\n%s does not exist!')
('[MediaPortal] fallback to default translation for', 'There exists already a directory with this name:\n%s')
('[MediaPortal] fallback to default translation for', 'The path is OK, the file name was not specified:\n%s')
('[MediaPortal] fallback to default translation for', 'The directory path and file name is OK:\n%s')
('[MediaPortal] fallback to default translation for', 'The directory path is not specified!')
('[MediaPortal] fallback to default translation for', 'Symbolic link with the same name in the directory path:\n%s available!')
Plugin Extensions/MediaPortal failed to load: /usr/lib/python2.7/site-packages/Crypto/Cipher/AES.so: undefined symbol: rpl_malloc
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList
File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
File "/usr/lib/enigma2/python/Plugins/Extensions/MediaPortal/plugin.py", line 42, in <module>
from resources.simplelist import *
File "/usr/lib/enigma2/python/Plugins/Extensions/MediaPortal/resources/simplelist.py", line 16, in <module>
from Plugins.Extensions.MediaPortal.resources.hlsplayer import *
File "/usr/lib/enigma2/python/Plugins/Extensions/MediaPortal/resources/hlsplayer.py", line 27, in <module>
from fetcher import HLSFetcher
File "/usr/lib/enigma2/python/Plugins/Extensions/MediaPortal/resources/fetcher.py", line 20, in <module>
from Crypto.Cipher import AES
ImportError: /usr/lib/python2.7/site-packages/Crypto/Cipher/AES.so: undefined symbol: rpl_malloc
Plugin Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[MyTube] MyTubePlayerService - init
[AutoBouquets] set language to en
[AutoBouquets] fallback to default translation for default
[AutoBouquets] fallback to default translation for style 1
[AutoBouquets] fallback to default translation for style 2
[AutoBouquets] fallback to default translation for style 3
[AutoBouquets] fallback to default translation for style 4
[AutoBouquets] fallback to default translation for style 5
[AutoBouquets] fallback to default translation for Large 1st Bouquet
[AutoBouquets] fallback to default translation for HD First
[AutoBouquets] fallback to default translation for Sort 1
[AutoBouquets] fallback to default translation for Sort 2
[AutoBouquets] fallback to default translation for Sort 3
[AutoBouquets] fallback to default translation for no
[AutoBouquets] fallback to default translation for /usr/share/enigma2/picon
[AutoBouquets] fallback to default translation for /picon
[AutoBouquets] fallback to default translation for /media/usb/picon
[AutoBouquets] fallback to default translation for /media/hdd/picon
[AutoBouquets] fallback to default translation for /media/cf/picon
[AutoBouquets] fallback to default translation for /usr/share/enigma2/picon
[AutoBouquets] fallback to default translation for /picon
[AutoBouquets] fallback to default translation for /media/usb/picon
[AutoBouquets] fallback to default translation for /media/hdd/picon
[AutoBouquets] fallback to default translation for /media/cf/picon
[AutoBouquets] fallback to default translation for Daily
[AutoBouquets] fallback to default translation for Weekly
[AutoBouquets] fallback to default translation for 30 Days
[AutoBouquets] fallback to default translation for AutoBouquets E2
[AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader
[AutoBouquets] fallback to default translation for AutoBouquets (Lraizer) Downloader
[AutoBouquets] fallback to default translation for 28.2e stream bouquet downloader
[SubsSupport] initializing fonts in /usr/lib/enigma2/python/Plugins/Extensions/KodiDirect/scripts/script.module.SubsSupport/lib/SubsSupport/fonts
[SubsSupport] initializing Default
[SubsSupport] initializing Ubuntu
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/KodiDirect/scripts/script.module.SubsSupport/lib/SubsSupport/fonts/Ubuntu-R.ttf...OK (Ubuntu-R.ttf)
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/KodiDirect/scripts/script.module.SubsSupport/lib/SubsSupport/fonts/Ubuntu-I.ttf...OK (Ubuntu-I.ttf)
[FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/KodiDirect/scripts/script.module.SubsSupport/lib/SubsSupport/fonts/Ubuntu-B.ttf...OK (Ubuntu-B.ttf)
config.skin.primary_skin.value A = PLi-HD/skin.xml
config.plugins.kodiplug.skinres.value A = hd
[SKLDR] Loading skin /usr/lib/enigma2/python/Plugins/Extensions/KodiDirect/skin/skin1.xml
loadSkin: Screen already defined elsewhere: EMCMoviePlayerSummaryGBHDQ
[eSocketMMIHandler] created successfully
[SHOUTcast] desktop size 1280x725
[CacheFlush] fallback to default translation for plugins
[CacheFlush] fallback to default translation for menu-system
[CacheFlush] fallback to default translation for extensions
[CacheFlush] fallback to default translation for event info
[CacheFlush] fallback to default translation for Automatic cache flushing
--> applying pep values
couldn't apply pep values.
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
starting hotplug handler
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x1fae304>}
[TIMER] record time changed, start prepare is now: Sun Oct 18 18:58:40 2015
[Timer] Record RecordTimerEntry(name=The X Factor, begin=Sun Oct 18 18:59:00 2015, serviceref=1:0:16:44F:3E9:2174:EEEE0000:0:0:0:, justplay=0)
[CrossEPG_Auto] AutoStart Enabled
[CrossEPG_Loader] patch epgcache.load() found
[CrossEPG_Loader] patch Oudeis found
[CrossEPG_Auto] Schedule Enabled at Wed Dec 9 23:23:04 2015
[CrossEPG_Auto] Time set to Thu Dec 10 00:00:00 2015 (now=Wed Dec 9 23:23:04 2015)
[AutoBouquets] AutoStart Enabled
[AutoBouquets] AutoBouquets Schedule Disabled at (now=Wed Dec 9 23:23:04 2015)
EMC: +++ EMC V3.7.4beta20131015 startup
[CacheFlush] fallback to default translation for pagecache
[CacheFlush] fallback to default translation for dentries and inodes
[CacheFlush] fallback to default translation for pagecache, dentries and inodes
[CacheFlush] fallback to default translation for Default
[CacheFlush] fallback to default translation for Starting
[CacheFlush] set min_free_kbytes to 1024 kB
[SKIN] Parsing embedded skin <embedded-in-'CacheFlushAutoScreen'>
[CacheFlush] fallback to default translation for Started
[AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
[AutomaticVolumeAdjustmentConfig] Loading config file...
[AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
[AutomaticVolumeAdjustment] initialize config values...
[ePopen] command: fp_control -i 46 0
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
[EPGC] time updated.. start EPG Mainloop
[EPGC] 0 events read from /media/hdd/epg.dat
warning, skin is missing element chBouq in <class 'Plugins.SystemPlugins.RecInfobar.plugin.RecInfoBar'>
[SKIN] No skin to read...
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
warning, skin is missing element tunerName in <class 'Screens.Dish.Dish'>
warning, skin is missing element turnSpeed in <class 'Screens.Dish.Dish'>
[Skin] Attribute not implemented: align value: left
RemovePopup, id = ZapError
setValue 20
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
[CrossEPG_Loader] /var/crossepg/crossepg_epgcopy /media/hdd/crossepg/ext.epg.dat /media/hdd/epg.dat
[EPGC] 0 events read from /media/hdd/epg.dat
EMC: Setting EPG language: en_EN
playing -1:0:0:0:0:0:0:0:0:0:
[servicelist] search for service in userbouquets
[servicelist] service not found in any userbouquets
Failed to start <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x20e3f68> >
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
child has terminated
pipes closed
[ePopen] command: route -n | grep ra0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 30(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 36(17)
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
poll: unhandled POLLERR/HUP/NVAL for fd 43(16)
child has terminated
pipes closed
192.168
0.0.0.0
child has terminated
pipes closed
nameservers: [[89, 101, 160, 5], [89, 101, 160, 4]]
read configured interface: {'lo': {'dhcp': False}, 'ra0': {'dhcp': True}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'ra0': {'preup': '\tpre-up wpa_supplicant -ira0 -c/etc/wpa_supplicant.ra0.conf -B -dd -Dwext || true\n', 'predown': '\tpre-down wpa_cli -ira0 terminate || true\n', 'ip': [0, 0, 0, 0], 'up': True, 'mac': '7c:dd:90:40:e3:15', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 41], 'up': True, 'mac': '30:00:0e:00:11:2f', 'dhcp': True, 'bcast': [192, 168, 0, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
AT plugin not found
ER plugin not found
[OpenWebif] no plugins to load
[OpenWebif] failed to listen on Port 80
[OpenWebif] failed to listen on Port 443
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
poll: unhandled POLLERR/HUP/NVAL for fd 45(16)
[VLC] Checking for buildin servicets ... no
[VLC] Checking for existing and usable servicets.so ... No module named servicets
[VLC] Checking for usable gstreamer service ... yes
EMC: Next trashcan cleanup in 97 minutes
EMC: [EMCMS] trashcan cleanup: no trashcan...
File "/var/etc/clean", line 1
SyntaxError: Non-ASCII character '\xd1' in file /var/etc/clean on line 1, but no encoding declared; see http://www.python.org/peps/pep-0263.html for details
connectionLost? [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion: Connection lost.
]
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0x1fae304>}
---- saving lame channel db
saved 85 channels and 1046 services!
release cached channel (timer timeout)
thread joined 0
set RTC to previous valid time
- (41) eServiceFactoryDVD
- (41) eServiceFactoryEPlayer3
- (41) eServiceFactoryM2TS
- (41) eServiceFactoryMP3
- (41) eServiceFactoryFS
- (41) eServiceFactoryDVB
- (40) eServiceCenter
- (36) Stream server
- (35) CI Slots
- (35) CA handler
- (30) eActionMap
- (22) Hdmi CEC driver
- (21) input device driver
- (20) DVB-CI UI
- (20) UHF Modulator
- (20) RC Input layer
- (20) misc options
- (20) AVSwitch Driver
- (20) Socket MMI
- (15) eWindowStyleManager
- (10) gRC
waiting for gRC thread shutdown
gRC thread has finished
- (9) GFBDC
- (9) gLCDDC
- (9) Font Render Class
- (8) graphics acceleration manager
- (5) Tuxtxt
- (1) Background File Eraser
reached rl -1
Hi guys, looking for some assistance. I have a Amiko Alien 2 running the OpenPli Enigma2 image. It came preloaded with only one EMU which is oscam. I am getting momentary channel freezes every 30 seconds or so. Can someone offer any suggestion to fix this ?
I have another box in the house ( Ferguson Ariva) which is running cccam and have no issues with it and picture is constant with no freezing.
Is it possible to add cccam to my Amiko Alien or perhaps is there a way to adjust the oscam configuration to fix this issue.
Any suggestion, help or assistance is greatly appreciated.
Thanks.
Would this channel list also work on a Amiko mini combo ?