kalkan99, out of politeness I don't give you a bad word
Posts by lupogiallo
-
-
New freeserver update 7.1.7
-
The problem returned, having to wait up to 40 minutes for the servers to update after pressing the yellow button! ?,regards
-
-
Melgas, I had your problem at the beginning and I ascertained that the problem was the rear switch, so trying doesn't hurt, I repeat
when it is turned on unplug, the switch leave it plugged in. Open DCC test. -
Hi, do a test, turn on the decoder then without turning off the switch disconnect it from the plug, get ready with the modem with network connection inserted and access the DCC program, insert the plug without touching the decoder switch, once the DCC is open , name: rooot, password dreambox click on search and it will find the ip once found ip of the dreambox accept, and after that click on the remote control at the top right and enter resurce, at first I had this problem decoder switch, do this test, greetings
-
Freeserver_7.1.5, automatic update, greetings
-
L'aggiornamento è automatico
-
Ma per far funzionare la versione 7.1.1, devi installare torrentplayer ?. Buon 2021.
sì
-
Questo e link http://tunisia-dreambox.info/TSplugins/torrentPlayer/ versione 2.1. Una volta installato il freeserver versione 7.1.0, installare torrentPlayer e riavviare enigma2, saluti
-
-
Hi, open freeserver, instead of the yellow button press the blue button, once opened positioned on: "Download sharing server as you select # 1 or # 2" and from ok you open another window from many times ok until it ends the list according to you have: nicam or oscam yellow or blue button once finished exit and active softcam, greetings.
-
Amico Ahmed dal 12 ottobre c'è stato questo problema che il freeserver versione 7.0.8 non ha accettato, ma nessuno ha risposto al mio msg, solo la versione 7.0.4 va, saluti
-
Ci auguriamo che questa versione accetti freeserver 7.8, versione
7.04.7.05 e 7.06, fino a quando l'immagine del 01/11/20020 ha inviato il decodificatore spark 7162 in blocco, saluti -
Info pulsante e attendere un po', tutto ok
-
Ciao, la versione ncam 1.4 su scintilla tripla invia il sistema in tilt, installato di nuovo l'immagine pure2 6.5, installato ncam 1.3 e poi 1.5, tutto ok, saluti
-
Have you tried ncam 11.3, and very stable, regards
-
My friends Ahemed Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 11/10/2020, found boot problem: after installation of freeccam 7.0.5 at full boot it remains in load 5, when restarting it remains in perennial boot. Installatazion new installed freeccam version 7.0.4 and everything ok, greetings
-
Spark devices sti7162 for amikoalien-PurE2-6.5 for test as at 01/10/2020, found boot problem: after installation of freeccam 7.0.5 at full boot it remains in load 5, when restarting it remains in perennial boot. Installatazion new installed freeccam version 7.0.4 and everything ok, greetings
-
Ciao, in questo modo non si dispone di connessione di rete,