Or another example, in the case of OpenPLi, CRON is not a default installed service. You must first install the service: "opkg update && opkg install busybox-crontab
Hi,please change to opkg install busybox-cron in OpenPli
Or another example, in the case of OpenPLi, CRON is not a default installed service. You must first install the service: "opkg update && opkg install busybox-crontab
Hi,please change to opkg install busybox-cron in OpenPli
inserted keys like P <groupid><srvid> <nb> <key>,and got confused how to make auto update of keys work? Do i need to enable AU on softcam.key reader or how?
thank you
Hi,maybe someone can point me a right direction,is it problem with my box,my tv or openpli4?
Problem is following:
When I start my xtrend et8000 box and it loads normally,spinner is rotating(but no bootlogo picture) and so on,but no picture,
when its logged in and tv channel is on,then tv channel has sound and still no picture,when i choose openpli menu(strange menu shows up on on tv,but tv picture not,so if i make
restart to enigma 2 then second time everything loads normally,there is bootlogo picture and also tv picture like needs to be.
What could be problem with it?
Tried different HDMI-CEC settings,turned it off,still nothing helped so far.
thank you
Hi,i have oscam as cardserver and mgcamd as softcam,but problem is that mgcamd starts ok,but oscam sometimes start sometimes i need to start it manually. I have conax local for oscam that needs to get updated also. Using OpenPli 4 image.
here is my config:
oscam.config
[global]
logfile = /tmp/.oscam/oscam.log
disablelog = 1
nice = -1
dropdups = 1
lb_mode = 1
lb_save = 120
lb_savepath =
lb_stat_cleanup = 12
[newcamd]
port = 10001@0B00:000000
key = 0102030405060708091011121314
allowed = 127.0.0.1,192.168.0.10-192.168.0.20
keepalive = 1
mgclient = 1
[dvbapi]
enabled = 0
au = 1
user = linuxsat
boxtype = dreambox
[monitor]
port = 16000
nocrypt = 127.0.0.1,192.168.0.0-192.168.0.255
#You are allowed to monitor from localhost, and all LAN with home ip.
hideclient_to = 15
#Hide clients from monitor or webinterface after 15 seconds idleness.
monlevel = 4
[webif]
httpport = 16005
httpuser = root
httppwd = dreambox
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.0.255
-----------------------------------------------------------------------
oscam.reader
[reader]
label = lower_card
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
group = 1
emmcache = 1,3,15
audisabled = 0
mhz = 357
cardmhz = 2700
ratelimitecm = 4
ratelimittime = 9000
srvidholdtime = 2000
ecmunique = 1
[reader]
label = upper_card
enable = 0
protocol = internal
device = /dev/sci1
detect = cd
group = 1
emmcache = 1,3,15
audisabled = 0
mhz = 357
cardmhz = 2700
ratelimitecm = 4
ratelimittime = 9000
srvidholdtime = 2000
ecmunique = 1
-----------------------------------------------------------------------
oscam.user
[account]
user = linuxsat
pwd = support
group = 1
au = 1
-----------------------------------------------------------------------
mgcamd config
mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 02 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 02 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 00 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 02 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 33 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 07 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 02 }
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 04 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 01 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }
-----------------------------------------------------------------------
newcamd.list
CWS_KEEPALIVE = 300
CWS = 127.0.0.1 10001 linuxsat support 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
-----------------------------------------------------------------------
and startup scripts on /etc/init.d
cardserver.oscam
#!/bin/sh
case "$1" in
start)
ulimit -s 1024
/usr/bin/oscam --config-dir /etc/tuxbox/config/oscam --daemon --pidfile /tmp/oscam.pid --restart 2 --utf8
;;
stop)
kill `cat /tmp/oscam.pid` 2> /dev/null
;;
restart|reload)
$0 stop
sleep 1
$0 start
;;
version)
echo "svn10656"
;;
info)
echo "oscam svn10656"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0
-----------------------------------------------------------------------
softcam.mgcamd
#!/bin/sh
case "$1" in
start)
sleep 15 ; start-stop-daemon -S -b -x /usr/bin/mgcamd
;;
stop)
exec start-stop-daemon -K -R 2 -x /usr/bin/mgcamd
;;
restart|reload)
$0 stop
sleep 15
$0 start
;;
version)
echo "1.38c"
;;
info)
echo "mgcamd 1.38c"
;;
*)
echo "Usage: $0 start|stop|restart"
exit 1
;;
esac
exit 0