Posts by georgeflu

  • PowerVU config files for oscam-emu

    fox group is in tandberg encryption, the others in powervu...

    so different things needed...


    anyway, it says " key not found" , so maybe something wrong in your keyfile???


    ps: oscam-emu works perfect for those channels...

  • Which motor for Gibertini off-set 1.5m dish, please?

    a 18" inch motor i think is good for 1.50 dish (as they say 1.35-1.80 , ) . in my life i had used only superjack as i said , because it was the only one that i could find easy in my area...maybe someone else is having a better opinion...

    for positioner, as i said vbox ii is a famous and good one. vboxii is the "sub-name" , and as i said i have seen it in many brandnames (the same box), so i don't know in which name you can find it in your area...

    https://www.orbitadigital.com/…tors-supports-design.html ...


    you can do whatever you want to your box, the memories for the satelite position, will be saved in positioner.

    you just can writte somewhere the numbers positions (once you have finalized the setup) and than you can just insert them in the new image/in motor setup...


    unfortunatelly ... i can't find the guide that i had in mind...

  • Edision OS mio 4K Plus

    η ταχυτητα μεταφορας απο πολλα, αλλα εχω παρατηρησει οτι σε εμενα ο filezilla κανει πολυ ταχυτερα την μεταφορα αρχειων ...

  • Which motor for Gibertini off-set 1.5m dish, please?

    first of all, i would like to say... (or remind) the big difference between motor and multi focus dish...

    the first one allows you bigger distance coverage (so more satellites) , the second one offers instant change from satellite to satellite.

    if you could combine both, it could be the ideal...


    but ... about the size

    Quote

    Besides, that dish was 1m x 80cm, the motor was not DiSEqC, so I better ask...

    1.80m or 1m??? because the motor type coult be totally different...

    in the second one (1m) you just need an usals diseqc motor, and nothing more, the base (depends ground or wall) and you do not need polar mount


    in the first one


    1) i do not leave in uk, so i do not know the law and rules that they have , so it would be better to ask someone that really knows.


    a) keep in mind that if the roof is coming out enough from the home + the dish height installation, it may cover the "signal line" of the satellite


    2) there are a few years, that the big dishes (at least in my area) are not in their "pick" . so i don't know what now happens in this part.

    in the past i was using (not in mine installation) superjack actuator motor and it size depends the dish size (i didn't saw it somewhere?) ...


    3) yes you need a positioner (vbox ii was the most famous in many brands) which will send the necessary electric power in the motor.


    4) most positioners, are using diseq c 1.2 and once you will finish the satellites setup,it will work from the receivers rc. i am not sure if usals is supported (think no).


    5) you do not need to reflash your box, and as an installation there is a point zero (the total center and highest position of the dish). in a few areas there is a satrllite in point zero (so things are easier) and in other not...



    edit: sorry the size is in the title 1.5M , so ... the second way.

    also keep in mind that as bigger is a dish, more accuracy is needed...

  • PowerVU config files for oscam-emu

    the first reader is only for constan.cw keys (i do not propose it) so you can delete it.


    the one that i have is like yours


    [reader]

    label = emulator

    protocol = emu

    device = emulator

    disablecrccws_only_for = 0E00:000000

    caid = 0500,0604,090F,0E00,1010,1801,2600,2602,2610,4AE1

    detect = cd

    ident = 0500:000000,007400,007800,021110,023800;0604:000000;090F:000000;0E00:000000;1010:000000;1801:000000,001101,002111,007301;2600:000000;2602:000000;2610:000000;4AE1:000011,000014,0000FE

    group = 1

    emmcache = 2,1,2,1

    emu_auproviders = 0604:010200;0E00:000000;1010:000000;2610:000000;4AE1:000011,000014,0000FE


    , but...


    the "black" in pvu channels may have a lot of reasons.


    let start, which receiver, which pvu channels

    and most important, what oscam.log shows...

  • Digea & EΡΤ hellas sat 39°E

    αυτη την ωρα και στιγμη, με βροχουλα, ειναι ειναι στα 8.5 (συνηθως ειναι στα 9.0 -9.2)


    και για να εχεις ως μετρο συγκρισης, στο ερτ world αυτη τη στιγμη ειμαι στα 13.6 (συνηθως στα 14.5)


    πιατο wave frontier με κεντρο 21) και δεκτης osmio+


    σε καθε περιπτωση ομως το καλο με αυτα, ειναι οτι λογω διαμορφωσης (QPSK) παιζουν και με αρκετα χαμηλο σημα...

  • Digea & EΡΤ hellas sat 39°E

    το ρωτησες 5 φορες (και εδω κι αλλου).

    για να μην παιρνεις απαντηση, κατι τρεχει.

    δεν ειναι κατι ευκολο, ειδικα εαν ο δεκτης γραφει κλειδωμενο το προγραμμα.


    τωρα εξαρταται το πως ξεκλειδωνει αυτο το καναλι. καποιος σου προτεινε το dvb dream (δεν ξερω εαν και πως)

  • Digea & EΡΤ hellas sat 39°E

    ειπαμε πολλες φορες οχι φορα παρτιδα τα νουμερακια...


    κανε το ενα edit στα γρηγορα και χωστα σ ενα txt (αν και ειναι γνωστα και δεν ειναι μονο για το 2, αλλα για ολα της συχνοτητας)

  • Digea & EΡΤ hellas sat 39°E

    Quote from tolli1986

    Για τα κανάλια που λες δεν χρειάζεται να αλλαξεις κατι στο σοφτκαμ.κανεις ένα σκαν σε αυτήν την συχνότητα και χρησιμοποιείς τα κλειδιά που είχες και στην συχνότητα 12720. δεν παίζει ρόλο κανονικά

    τα κλειδια ναι... τα id των καναλιων οχι... (μηνυματα 663 κ 679)

  • Digea & EΡΤ hellas sat 39°E

    δεν πηγαν απο χθες

    και συνεχιζουν να υπαρχουν κανονικα και τα παλια.οποτε δεν ειναι και απαραιτητο να το κανεις


    αν τωρα θελεις για την εμπειρια...

    ξεκινα απο το μηνυμα #659 και διαβαζε προς τα κατω

  • Missing satellite channels on search

    about longitude and latitude i think chris is a little confused because of me.

    i have the strange (in my personal motor dish, which is still installed in my fathers home from when i was living there)

    i am living in longitude 21 degrees

    i installed the dish, and i tested through my satellite meter. i had the perfect signal from 30W to 75E (my limits when Lmi 75E was available in Greece)


    for a strange reason , when i connected my receiver (first a dm800 and a few years later a vu+uno) , and set longitude/latitude, the motor had about 3-4 degrees deviation (maybe enigma2 fault, maybe wrong motor calibration?) . i tried to adjust whole the motor/dish 3 degrees, but i was loosing too much from the midle to the limits...


    the solution was to insert fake longitude (about 25 degrees) and it was working perfect...


    so i suggested to chris, if he is sure that the dish is adjusted perfect, to try change the values of latitude , and watch what happens


    the dish is still there for anyone who wants to examinate it :cool1: