Posts by canthackit

  • OTTOMAN DREAMS MoD by oktus

  • Kodi: addon migration in progress - please wait

    Hi

    had this message originally on the modded version of ATV 6.0, but because of other problems changed to modded VIX 4.0.

    getting the above message on both images, just left the VIX version running for 6 hours still got the message.

    anybody know what the problem is or might be.


    regards: canthackit

  • Cannot connect to server

    sorry for the late reply, amongst other things my BB hub keeps disconnecting.
    Yes mate i did check that, it would appear that my ip addy is linked to my dns.
    can't do much atm until the telephone engineer comes on Tuesday.


    regards: canthackit


    - - - Updated - - -


    went out, when i got back the BB is working, don't trust it though.
    but at least i can try to get the cards running correctly.
    on the server it's showing "card ok" "1 entitlement" on both.
    on my client it's showing as connected and 0 of 0 cards
    the external ip has changed again because of all the booting, but it is linked to my no-ip dns.
    this is driving me bonkers just cannot suss what the problem is.


    regards: canthackit


    - - - Updated - - -


    ok sort of got it working, not good tho.


    In oscam.conf i have deleted the entries for CCcam and newcamd now i can connect.


    Client is showing 0 fo 2 cards connected, but i can only get them at 2 hops changed CCcamversion from 2.1.2 to 2.3.0 not made any difference.


    regards: canthackit


    - - - Updated - - -


    So BT have just rang to say that the engineer's visit has been cancelled because they have now found that it's a line fault...........typical:thumbsdown:


    i've now created 2 groups on the server group 1 Redlight group 2 NC+, i can clear both cards but only @2hops, and the client is still showing as zero cards available.


    anybody got any clues as to whats going on, three bloody days and this is the best i can do.


    regards: canthackit


    - - - Updated - - -


    OK
    got it working.
    installed Houara's clean ATV 6.0 put on the same configs i've been using, everything's working fine, cards are now showing as local, and recieving them @1hop


    very strange why it wasn't, or had stopped working with BH, VIX, PLI.


    maybe someone could explain this to me.


    regards: canthackit

  • Cannot connect to server

    Hi
    i run a DB SE clone as a server have 2 subs Redlight 10 channel and NC+ premium.
    atm i have openpli 4.0 modded on with oscam 11359.
    everything has been working fine but now after 2 days only 1 peer can connect, all other 7 peers including myself cannot connect, although it's showing all connected apart from the 1 no one is showing as online.
    i can't even connect with CCcam.
    all the configs are as they always have been when working.
    the cards are clearing and have updated on the server.
    the port is forwarded correctly.
    the external ip is linked correctly to my dns.
    but that is the only thing that i think where the problem might lie, i had to reboot the router a few days ago and being a dynamic ip i guess it must have changed but can't be sure.
    i just don't know what else to do, is there anybody that can help? this is driving me bonkers.


    regards: canthackit

  • VUPlus Solo4k OpenATV 6.0 Kodi 17.0 master G

    Boss
    had to put 6.0 back on had 5.3 there.
    did the telnet init 3
    ftp'd into the box theres no settings.xml file in /ect/enigma2........theres a settings file but without the .xml extension.


    just going to complete my config and wait for your instructions:20_003:


    regards:canthackit

  • VUPlus Solo4k OpenATV 6.0 Kodi 17.0 master G

    Yeah Boss
    as i said earlier tried the original 6.0 nightly build from downloads, that works fine no hiccups, but in general nowhere near as good as your mod.


    i'll stick with 5.3 until you can finish the latest build i'm sure that will rectify the fault.


    regards: canthackit

  • VUPlus Solo4k OpenATV 6.0 Kodi 17.0 master G

    yes Boss
    done everything possible on the audio side of things.
    without going into detail you name it i've done it.
    Dunno what else the could possibly be, as I say it don't do it on any other image, i'm having to run 5.3 as it don't happen on that.


    i've even reinstalled the image 3 times from scratch.


    best regards: canthackit

  • VUPlus Solo4k OpenATV 6.0 Kodi 17.0 master G

    Boss
    This image i've posted elsewhere but got nowhere with a solution.
    The audio on Moviestar when changing from Spanish to dos, when channel changing or anything else then going back to the previous channel the sound keeps reverting back to Spanish.
    It doesn't do it on any other image, i've tried it on the original ATV 6.0, on VIX on BH on ATV 5.3 the audio works just fine.


    regards: canthackit

  • Vu+ solo 4k oscam Black Hole setup

    makes no difference.
    i've got 10 peers all group 1 always have been, never had a problem, or should i say never caused freezing, if he's running it on a server then it can make a difference.
    mckee25 i think has offered the correct solution.


    regards: canthackit

  • Audio problem with ATV modded 6.0

    Got a problem here with audio.
    not sure what the cause is, i run a sound bar and got the image settings as always ac3/aac downmix enabled.
    it on happens on Moviestar 19.2 usually once i've selected the default audio in this case Dos it stays that way, but now it keeps reverting back to the native language ie Spanish, when i change channels, or can you believe the other day in high winds and temporary picture freezes it just kept reverting back to Spanish.
    never had this sort of problem before with any setup.
    anybody got a solution please.
    just to add this is with the ottoman dreams mod skin, if that makes any difference.
    changed skins to metrix made no difference, HD channels on qaa work just fine thought, so i'ts only on the sd channels.


    regards:canthackit

  • Do I need a dvbapi account entry in user?

    Quote from technodvl2

    [newcamd]
    port = 11000@0500:043800;11000@0100:000068
    key = 0102030405060708091011121314
    keepalive = 1


    must be different ports


    really? i have never had that format before mate, always been the same port that's the newcamd port.
    but if you say so, then i won't argue lol.


    regards: canthackit


    i should have guessed you'd be right just checked on streamboard, this is what they say.......
    port
    HakenRot.png parameter is required


    TCP port/DES key/CAID/ident definitions. Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES Key will be used!


    port[{DES key}]@CAID[:ident][,ident]...[;port[{DES key}]@CAID[:ident][,ident]...]...


    Example:


    port = 15000@1234:000000 # (CAID 1234 connected with port 15000)
    port = 15000@1234:000000;15001@5678:000000 # (CAID 1234 connected with port 15000. CAID 5678 with port 15001)

  • Do I need a dvbapi account entry in user?

    Hello
    i've been running CCcam on my server for quite a while but now I need to run oscam.
    forgot how to set it up, read loads of threads and got it working.
    the one thing that aint online is the dvbapi entry user account, do i need one? i've added a very basic one but it just shows offline.


    here's my oscam.conf
    [global]
    logfile = /var/log/oscam.log
    nice = -1
    preferlocalcards = 1


    [cache]


    [newcamd]
    port = 11000@0500:043800;11000@0100:000068
    key = 0102030405060708091011121314
    keepalive = 1


    [cccam]
    port = 12000
    nodeid = 0558244110821388
    version = 2.1.2
    reshare = 1
    ignorereshare = 1


    [streamrelay]


    [dvbapi]
    enabled = 1
    au = 1
    pmt_mode = 0
    delayer = 60
    user = local
    boxtype = dreambox


    [webif]
    httpport = 8181
    httpuser = linuxsat
    httppwd = support
    httprefresh = 15
    httpshowpicons = 1
    httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255


    and the lines in oscam.user
    [account]
    user = local
    au = 1
    group = 1


    best regards: canthackit