Solved :-)
Thanks to Master G.
My config files were wrong. After several corrections (last correction was "group" in the viasat reader was wrongly set to 2....should be 1) it now works :-)
Thanks for all the help.
br
NEJensen
Solved :-)
Thanks to Master G.
My config files were wrong. After several corrections (last correction was "group" in the viasat reader was wrongly set to 2....should be 1) it now works :-)
Thanks for all the help.
br
NEJensen
Hi Jokosat
Thanks for the offer. That is a very good offer :-).......but Master G is helping me at the moment.
I have a [cccam] port = 50100 on both on the server and the client have tried the N-line in the oscam.server on the client....but still no picture :-(
If you have any other suggestions please write and I will try them out :-)
Thanks for all your help until now. I really appreciate this :-)
Br
NEJensen
Hi Master G,
Im grateful for your patience :-)
Grrrrrr.........I can not get it to work.
As you can see from my OScam-status the cccam shows NEEDINIT!!! and the port of the client is a random portnumber!!
Server status:
Client status
and the C-lines is placed in the oscam.server on the client?
Hi,
Still a little confused....in CCCam you create til C-line on the clients and a F-line(s) on the server. Can you specify what to write in the Server ctr Client? (also witch users where)
/NEJensen
Hi,
Thks for the answer....but....
- On the clients, do I choose the Softcam "cccam" or "oscam" on the clients??
- do I need to setup oscam on the clients? or is the CCCam.cfg enough??
- what is the noteid under CCCam in the oscam.conf
/NEJensen
Hi,
I have one Vu+Duo2 with an internal card (viasat) and need to share this with my 2 other DM800-boxes. It has been working with CCcam 2.3.0 on all devices, byt now I have to use OScam on my Vu+.
The OScam is worning and decoding the card on the VU+ (server) but I cant get the sharing to work om my DM800 (clients). Im trying to use OSCam on the server and CCcam om the clients.....but im confused about where and when to use CCcam/oscam.
can anyone help me, so my children can see TV again (the are ignoring me at the moment :-))
Here are my configs:
__________________________________________________________________________________________________________________________
oscam.conf
[global]
logfile = /dev/tty
nice = -1
preferlocalcards = 1
WaitForCards = 1
[cache]
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = dvb-api
boxtype = dreambox
[webif]
httpport = 5000
httpuser = userxxxxxxxx
httppwd = pwdxxxxxxxx
httppiconpath = /etc/tuxbox/config/oscam/webpicon/
httprefresh = 7
httppollrefresh = 10
httphidetype = sh
httpshowpicons = 1
httppiconsize = 25
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
httposcamlabel = BlackHole OSCam
[cccam]
port = 50100
reshare = 1
version = 2.3.0
updateinterval = 200
keepconnected = 1
nodeid = 9b386a3e6e40520
OScam.server
[reader]
label = VIASAT
protocol = internal
device = /dev/sci0
boxid = boxid
fix07 = 0
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,1,0,0
[reader]
label=CCcam-Client
enable=1
protocol=cccam
device=ip-adress-of-the-client,50100
user=user-client
password=password-client
cccversion=2.3.0
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
OScam.user
[account]
user = otheruser
pwd = otherpassword
uniq = 1
monlevel = 1
group = 1
[account]
user = User-client
pwd = password-client
uniq = 1
monlevel =1
group =1
Clients (OScam r11359):
oscam.conf
[global]
disablelog = 1
#serverip = 192.168.1.200
logfile = /dev/tty
preferlocalcards = 1
[cache]
[cs357x]
port = 25550
serverip = server.ip
[cccam]
port = 50100
serverip = server.ip
[cs378x]
port = 12005
[dvbapi]
enabled = 1
au = 1
pmt_mode = 6
user = dvb-api
boxtype = dreambox
[webif]
httpport = 8081
httpallowed = 10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255,127.0.0.1
Oscam.server
[reader]
label = lower_card
enable = 0
protocol = internal
device = /dev/sci0
detect = cd
cardmhz = 2700
group = 1
emmcache = 1,3,15,0
ratelimitecm = 4
ecmunique = 1
ratelimittime = 10000
srvidholdtime = 2000
cooldown = 30,600
[reader]
label = Test
protocol = cs357x
device = serv er.ip,25550
user = otheruser
password = otherpassword
caid = 0940
group = 1
emmcache = 1,3,2,0
[reader]
label = cccam-reader
protocol = cccam
device = server.ip,50100
user = otheruser
password = otherpassword
inactivitytimeout = 30
group = 1
emmcache = 1,1,2
cccversion = 2.3.0
ccckeepalive = 1
oscam.user
[account]
disabled = 1
user = anonymous
group = 1
_______________________________________________________________________________________________________________
- On the clients, do I choose the Softcam "cccam" or "oscam" on the clients??
- do I need to setup oscam on the clients? or is the CCCam.cfg enough??
- what is the noteid under CCCam in the oscam.conf
thks in advance.
Br
NEJensen
I use 2.3.0 for 3 years and all working 100% no problems like nano said it's all rumours.
Hi Ronan,
Do you have any remote connections in your Server view?
Br
NEJensen
Hi Again,
I do not understand your answer....is it normal to have a "remote"-user or not??? og if it is.....what is it for???
Im ONLY sharing internal, my cccam.cfg ONLY contains F-lines for my clients and all my clients have been blocked on my router so the can't connect to the internet at all, so if am hijacked it can only be from my Vu+ with CCcam.
(I can certainly see why the roumors about CCcam is alive if there is no explanation to a remote-user connecting to your Card!!)
Br
NEJensen
Hi Again,
But why are there "remote traffic" at all when im only useing the cccam internaly??
Br
NEJensen
Hi Nano,
Can you perhaps refere me to a thread or page where I can read about why CCCam creates a "remote" and what it does? I would really like an explanation to this and I haven't been abel to find any on my own.
Thanks in advance :-)
Br
NEJensen
Hi,
I have a new Vu+Duo2 with CCcam 2.3.0. (the only cam I could get to work with my Card :-)). After a few days I noticed a stange behavior with the cam....a "remote" appeared under "shareinfo" !! (see attached). When I restart my VU+ the entry disappeares a'gain, but after a few days its there again.
I have changed the default password and ports (in cccam.cfg and on the VU+) and I only share my card with internal Dreamboxes (and do not want to share outside my home :-)). I haven't seen strange connections in NETSTAT on the VU+
Can anyone explain this and is it normal behavior and nothing to worrie about (im worried about the hole backdoor issue)?
Can I do something to make absolutely sure that i'm not unwillingly sharing my Card with external clients?
Br
NEJensen
Denmark