Posts by roycke

Hi, thankx for the explanation!

This works on my dm800se for the lan.

But.... how can i do this for wlan?:)

I have replaced eth0 into wlan0 and rebooted but no. The box takes the original mac;(

My webcam does save the files on the usb from the Linux server.
i have put in the following command:
rm /volumeUSB1/usbshare/*.mp4

Each day he does remove all the files.
But i want him 2 remove only the files from yesterday.
the files are named with date:
20130331_(current time).mp4

How can i make this work?

thanks allready.

my vigor router has syn flood defence.
i have enabled that. hope this helps.

ok. thanks. i have no big server only 40 clients. but also serveral offline client ill gues someone inthere is playing.
is it not possible 2 get the ip adres from this attack and block it in the firewall?

thanks.

can someone pls help me 2 install the correct drivers?

i have installed last week a ubuntu 10x server with cccam.
this week it 2x stopped for now reason.
when i looked at var/log/messages it gives this:
Nov 29 15:09:00 ubuntu kernel: [112920.866534] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:10:22 ubuntu kernel: [113002.243056] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:11:35 ubuntu kernel: [113075.870790] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:12:36 ubuntu kernel: [113136.628463] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:13:45 ubuntu kernel: [113206.007073] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:15:15 ubuntu kernel: [113295.963727] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:16:30 ubuntu kernel: [113370.934025] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:17:34 ubuntu kernel: [113434.755281] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:18:50 ubuntu kernel: [113510.658666] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:20:00 ubuntu kernel: [113580.981041] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:21:00 ubuntu kernel: [113641.018767] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:22:02 ubuntu kernel: [113702.600129] possible SYN flooding on port 12000. Sending cookies.
Nov 29 15:23:02 ubuntu kernel: [113762.751008] possible SYN flooding on port 12000. Sending cookies.

how can i blok or solve this problem?

auto restart script not working.
i have installed a ubuntu server with cccam.
everything works now except the auto restart script when offline...
i have added the script, see attachement, but when i give cccam stop it does not restart automaticly.
can someone pls tell me whats wrong in the script?
reg,

thanks. the start stop cript works good now!

yep. that correct.

here they r.
thanks!

ps. were do i need 2 put the script 2 see cccam is alive and if not it will restart?

Quote from Ten Below

Linux can do many things, including webserver. Where did you read you needed this option for c/s?

Here. http://linuxsat-support.com/li…all-cccam-debian-6-a.html
In the first 5 rows. And point 17 and 18.

I have installed a ubuntu cccam server by using the debian tut.
But i did not install the webserver only ssh and the standard stuff.
Every this works ok, also the webinfo.
So my question is, why should i need the webserver application?
Reg roy

I have done the start stop scprit like written in here in my ubuntu server. Stop cccam works.. Start cccam does not work. Can someone the complete scripts file in here so i can see whats wrong.?
A other question the update script, does ist also restart cccam?
I would like 2 restart cccam everynight..
Thanks allready.

and this is the not working debian giving:
0.802939] audit: initializing netlink socket (disabled)
[ 0.802962] type=2000 audit(1321625943.800:1): initialized
[ 0.809880] highmem bounce pool size: 64 pages
[ 0.809889] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.812569] VFS: Disk quotas dquot_6.5.2
[ 0.812675] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.812805] msgmni has been set to 1740
[ 0.813145] alg: No test for stdrng (krng)
[ 0.813242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.813248] io scheduler noop registered
[ 0.813252] io scheduler anticipatory registered
[ 0.813256] io scheduler deadline registered
[ 0.813325] io scheduler cfq registered (default)
[ 0.813506] pcieport 0000:00:04.0: irq 24 for MSI/MSI-X
[ 0.813516] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.813765] isapnp: Scanning for PnP cards...
[ 1.167849] isapnp: No Plug & Play device found
[ 1.170362] Linux agpgart interface v0.103
[ 1.170781] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.170927] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.171436] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.171700] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.171706] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.172445] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.172585] mice: PS/2 mouse device common for all mice
[ 1.172661] rtc_cmos 00:03: RTC can wake from S4
[ 1.172734] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.172773] rtc0: alarms up to one month, 242 bytes nvram
[ 1.172792] cpuidle: using governor ladder
[ 1.172797] cpuidle: using governor menu
[ 1.172806] No iBFT detected.
[ 1.173516] TCP cubic registered
[ 1.173780] NET: Registered protocol family 10
[ 1.175255] Mobile IPv6
[ 1.175261] NET: Registered protocol family 17
[ 1.175288] Using IPI No-Shortcut mode
[ 1.175452] PM: Resume from disk failed.
[ 1.175473] registered taskstats version 1
[ 1.175823] rtc_cmos 00:03: setting system clock to 2011-11-18 14:19:05 UTC (1321625945)
[ 1.175916] Initalizing network drop monitor service
[ 1.175962] Freeing unused kernel memory: 380k freed
[ 1.176518] Write protecting the kernel text: 2508k
[ 1.176561] Write protecting the kernel read-only data: 920k
[ 1.191703] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.216250] udev[46]: starting version 164
[ 1.561761] SCSI subsystem initialized
[ 1.593073] usbcore: registered new interface driver usbfs
[ 1.593340] usbcore: registered new interface driver hub
[ 1.593627] usbcore: registered new device driver usb
[ 1.649209] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.649283] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.649320] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.649365] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.649411] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.649431] ehci_hcd 0000:00:13.5: debug port 1
[ 1.649475] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe02a000
[ 1.660053] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.660123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.660129] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.660135] usb usb1: Product: EHCI Host Controller
[ 1.660139] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 1.660144] usb usb1: SerialNumber: 0000:00:13.5
[ 1.660331] usb usb1: configuration #1 chosen from 1 choice
[ 1.660392] hub 1-0:1.0: USB hub found
[ 1.660409] hub 1-0:1.0: 10 ports detected
[ 1.661091] libata version 3.00 loaded.
[ 1.664660] tg3.c:v3.116 (December 3, 2010)
[ 1.664698] tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.664712] tg3 0000:02:00.0: setting latency timer to 64
[ 1.671108] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.671126] ACPI: Thermal Zone [THRM] (49 C)
[ 1.671757] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.678218] scsi0 : pata_atiixp
[ 1.711294] scsi1 : pata_atiixp
[ 1.713482] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfe00 irq 14
[ 1.713489] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfe08 irq 15
[ 1.716141] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.716191] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.716227] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.716259] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.716313] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02f000
[ 1.717634] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:23:7d:10:1d:6b
[ 1.717643] tg3 0000:02:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.717651] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.717657] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.776046] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.776054] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.776060] usb usb2: Product: OHCI Host Controller
[ 1.776064] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.776069] usb usb2: SerialNumber: 0000:00:13.0
[ 1.776392] usb usb2: configuration #1 chosen from 1 choice
[ 1.776512] hub 2-0:1.0: USB hub found
[ 1.776533] hub 2-0:1.0: 2 ports detected
[ 1.776648] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.776685] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.776702] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.776751] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02e000
[ 1.836046] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.836052] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.836058] usb usb3: Product: OHCI Host Controller
[ 1.836062] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.836067] usb usb3: SerialNumber: 0000:00:13.1
[ 1.836376] usb usb3: configuration #1 chosen from 1 choice
[ 1.836496] hub 3-0:1.0: USB hub found
[ 1.836517] hub 3-0:1.0: 2 ports detected
[ 1.836628] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.836662] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.836680] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.836726] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02d000
[ 1.876540] ata1.00: CFA: 1024MB ATA Flash Disk, ADAA408J, max MWDMA2
[ 1.876547] ata1.00: 2001888 sectors, multi 0: LBA
[ 1.884490] ata1.00: configured for MWDMA2
[ 1.884673] scsi 0:0:0:0: Direct-Access ATA 1024MB ATA Fla ADAA PQ: 0 ANSI: 5
[ 1.896048] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.896055] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.896061] usb usb4: Product: OHCI Host Controller
[ 1.896065] usb usb4: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.896070] usb usb4: SerialNumber: 0000:00:13.2
[ 1.896286] usb usb4: configuration #1 chosen from 1 choice
[ 1.896411] hub 4-0:1.0: USB hub found
[ 1.896431] hub 4-0:1.0: 2 ports detected
[ 1.896536] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.896575] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.896597] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.896627] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02c000
[ 1.956046] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.956052] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.956057] usb usb5: Product: OHCI Host Controller
[ 1.956062] usb usb5: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.956067] usb usb5: SerialNumber: 0000:00:13.3
[ 1.956377] usb usb5: configuration #1 chosen from 1 choice
[ 1.956497] hub 5-0:1.0: USB hub found
[ 1.956517] hub 5-0:1.0: 2 ports detected
[ 1.956626] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.956663] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.956679] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.956710] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02b000
[ 1.972037] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 2.016041] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.016047] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.016052] usb usb6: Product: OHCI Host Controller
[ 2.016057] usb usb6: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 2.016062] usb usb6: SerialNumber: 0000:00:13.4
[ 2.016341] usb usb6: configuration #1 chosen from 1 choice
[ 2.016786] hub 6-0:1.0: USB hub found
[ 2.016809] hub 6-0:1.0: 2 ports detected
[ 2.074014] sd 0:0:0:0: [sda] 2001888 512-byte logical blocks: (1.02 GB/977 MiB)
[ 2.074104] sd 0:0:0:0: [sda] Write Protect is off
[ 2.074110] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.074147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.074371] sda: sda1 sda2 < sda5 >
[ 2.077231] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.105821] usb 1-4: New USB device found, idVendor=152d, idProduct=2338
[ 2.105829] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 2.105836] usb 1-4: Product: USB to ATA/ATAPI Bridge
[ 2.105840] usb 1-4: Manufacturer: JMicron
[ 2.105844] usb 1-4: SerialNumber: 222222222222
[ 2.106037] usb 1-4: configuration #1 chosen from 1 choice
[ 2.160146] Initializing USB Mass Storage driver...
[ 2.160339] scsi2 : SCSI emulation for USB Mass Storage devices
[ 2.160846] usbcore: registered new interface driver usb-storage
[ 2.160853] USB Mass Storage support registered.
[ 2.162407] usb-storage: device found at 2
[ 2.162413] usb-storage: waiting for device to settle before scanning
[ 2.237217] PM: Starting manual resume from disk
[ 2.237226] PM: Resume from partition 8:5
[ 2.237230] PM: Checking hibernation image.
[ 2.237946] PM: Error -22 checking image file
[ 2.237950] PM: Resume from disk failed.
[ 2.276190] kjournald starting. Commit interval 5 seconds
[ 2.276210] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.592061] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.767086] usb 4-1: New USB device found, idVendor=0403, idProduct=6001
[ 2.767095] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.767101] usb 4-1: Product: Smartreader plus
[ 2.767106] usb 4-1: Manufacturer: Argolis BV
[ 2.767110] usb 4-1: SerialNumber: Reader 0
[ 2.767289] usb 4-1: configuration #1 chosen from 1 choice
[ 2.864409] udev[290]: starting version 164
[ 3.032080] usb 4-2: new full speed USB device using ohci_hcd and address 3
[ 3.385453] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 3.385468] ACPI: Power Button [PWRB]
[ 3.385619] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.385627] ACPI: Power Button [PWRF]
[ 3.387034] processor LNXCPU:00: registered as cooling_device0
[ 3.437578] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.447310] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 3.453530] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.475994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.487126] usb 4-2: New USB device found, idVendor=0403, idProduct=6001
[ 3.487134] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.487141] usb 4-2: Product: Smartreader plus
[ 3.487145] usb 4-2: Manufacturer: Argolis BV
[ 3.487149] usb 4-2: SerialNumber: Reader 0
[ 3.487315] usb 4-2: configuration #1 chosen from 1 choice
[ 3.487645] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SM00 [0xb00-0xb07]
[ 3.487697] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.674976] [drm] Initialized drm 1.1.0 20060810
[ 3.676513] usbcore: registered new interface driver usbserial
[ 3.676788] USB Serial support registered for generic
[ 3.677071] usbcore: registered new interface driver usbserial_generic
[ 3.677076] usbserial: USB Serial Driver core
[ 3.705793] USB Serial support registered for FTDI USB Serial Device
[ 3.706268] ftdi_sio 4-1:1.0: FTDI USB Serial Device converter detected
[ 3.706374] usb 4-1: Detected FT232BM
[ 3.706379] usb 4-1: Number of endpoints 2
[ 3.706384] usb 4-1: Endpoint 1 MaxPacketSize 64
[ 3.706388] usb 4-1: Endpoint 2 MaxPacketSize 64
[ 3.706392] usb 4-1: Setting MaxPacketSize 64
[ 3.707190] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 3.707219] ftdi_sio 4-2:1.0: FTDI USB Serial Device converter detected
[ 3.707265] usb 4-2: Detected FT232BM
[ 3.707269] usb 4-2: Number of endpoints 2
[ 3.707273] usb 4-2: Endpoint 1 MaxPacketSize 64
[ 3.707278] usb 4-2: Endpoint 2 MaxPacketSize 64
[ 3.707282] usb 4-2: Setting MaxPacketSize 64
[ 3.714553] usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 3.714590] usbcore: registered new interface driver ftdi_sio
[ 3.714595] ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
[ 3.892344] [drm] radeon defaulting to userspace modesetting.
[ 3.893213] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.893748] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on minor 0
[ 3.901564] Error: Driver 'pcspkr' is already registered, aborting...
[ 4.376389] usb 4-2: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[ 4.395643] ftdi_sio ttyUSB1: FTDI USB Serial Device converter now disconnected from ttyUSB1
[ 4.395694] ftdi_sio 4-2:1.0: device disconnected
[ 4.400551] usb 4-1: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[ 4.403247] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 4.403502] ftdi_sio 4-1:1.0: device disconnected
[ 4.554157] Adding 95224k swap on /dev/sda5. Priority:-1 extents:1 across:95224k
[ 4.655511] EXT3 FS on sda1, internal journal
[ 4.731437] loop: module loaded
[ 5.721594] tg3 0000:02:00.0: irq 25 for MSI/MSI-X
[ 5.911986] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.160433] usb-storage: device scan complete
[ 7.162657] scsi 2:0:0:0: CD-ROM LITE-ON LTR-40125S ZS0A PQ: 0 ANSI: 0
[ 7.228677] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 7.228686] Uniform CD-ROM driver Revision: 3.20
[ 7.228940] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 7.267611] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.269005] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 7.465070] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex
[ 7.465079] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
[ 7.465526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.840019] eth0: no IPv6 routers present

in ubuntu it gives this:

usb usb1: configuration #1 chosen from 1 choice
[ 0.480650] hub 1-0:1.0: USB hub found
[ 0.480672] hub 1-0:1.0: 10 ports detected
[ 0.480803] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.480841] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.480875] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.480957] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.481010] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02f000
[ 0.560171] usb usb2: configuration #1 chosen from 1 choice
[ 0.560238] hub 2-0:1.0: USB hub found
[ 0.560260] hub 2-0:1.0: 2 ports detected
[ 0.560356] alloc irq_desc for 17 on node -1
[ 0.560361] alloc kstat_irqs on node -1
[ 0.560378] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.560411] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.560502] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.560556] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02e000
[ 0.652132] usb usb3: configuration #1 chosen from 1 choice
[ 0.652199] hub 3-0:1.0: USB hub found
[ 0.652221] hub 3-0:1.0: 2 ports detected
[ 0.652341] alloc irq_desc for 18 on node -1
[ 0.652346] alloc kstat_irqs on node -1
[ 0.652363] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.652398] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 0.652496] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.652550] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02d000
[ 0.744279] usb usb4: configuration #1 chosen from 1 choice
[ 0.744338] hub 4-0:1.0: USB hub found
[ 0.744360] hub 4-0:1.0: 2 ports detected
[ 0.744462] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.744498] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 0.744568] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 0.744602] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02c000
[ 0.836259] usb usb5: configuration #1 chosen from 1 choice
[ 0.836318] hub 5-0:1.0: USB hub found
[ 0.836341] hub 5-0:1.0: 2 ports detected
[ 0.836447] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.836481] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 0.836554] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 0.836588] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02b000
[ 0.928690] usb usb6: configuration #1 chosen from 1 choice
[ 0.928769] hub 6-0:1.0: USB hub found
[ 0.928792] hub 6-0:1.0: 2 ports detected
now im going 2 install debian agian....

this is what i get with the LSusb:
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ubuntu 10 lts is working but debian not.....
Same lsusb output, same cccam.cfg same readers.....???

which one is better ubuntu or debian?

Reg.

hi i tries bouth.
with lsusb ik gave 6 usb ports and on 2 u could see "something" was connected.
it looked like 004:004 XXXXXX
now im installing ubuntu 2 see of this works.......so i cant see it anymore.

i also tried usb 1 usb2 etc. like u listed. also nothing.
ill gues its a driver issue with this special pc.....
if ubuntu will not work ill install debian back and give a reply.

i have installed debian 606 with this great tut on this site.
cccam runs great but he doesnt see the smargo readers...:(
i have tried 2 lines in de cfg:

SERIAL READER : /dev/ttyUSB0 smartreader
SERIAL READER : /dev/ttyUSB0 smartreader+

in de deamon.log it says:
Nov 17 21:09:00 debian brltty[489]: USB: endpoint descriptor not found: 81

Nov 17 21:09:00 debian brltty[489]: USB: endpoint descriptor not found: 81

Nov 17 21:09:05 debian brltty[489]: USB: endpoint descriptor not found: 81

Nov 17 21:09:05 debian brltty[489]: USB: endpoint descriptor not found: 81

Nov 17 21:09:05 debian brltty[489]: USB: endpoint descriptor not found: 81

Nov 17 21:09:05 debian brltty[489]: USB: endpoint descriptor not found: 81

Nov 17 21:09:11 debian brltty[489]: USB: endpoint descriptor not found: 81

when i put the smargo in a old ubuntu server with the same cccam.cfg it works good.
ill hope some one can help me.
Allready thanks alot!

ps the server is a HP T5730.