tenbelow will my cccam.check.sh ,configupdate.sh, keyupdater.sh, logcleanup.sh, oscamcheck.sh all be ok or do these need changed as well.
Posts by toonshare
-
-
hi fellow vips
hope ya can help me please.
ive installed the silverfox auto script for oscam to cccam
but its for smargo reader and im using a omnikey reader ive got the reader working.but i need proper configs for the server im scared to delete anything from the server incase its wrong.
i need configs for
cccam.cfg
oscam.server
oscam.user
oscam.confplease could you help me please this is what there at the min could someone please change these for me to work id be over the moon if
someone can help me pleasecccam.cfg
#This config was created by Silverfox0786.
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
SERVER LISTEN PORT: xxxx
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT: 16001
SOFTKEY FILE: /var/keys/SoftCam.Key
AUTOROLL FILE: /var/keys/AutoRoll.Key
STATIC CW FILE: /var/keys/constant.cw
CAID PRIO FILE: /var/etc/CCcam.prio
PROVIDERINFO FILE: /var/etc/CCcam.providers
CHANNELINFO FILE: /var/etc/CCcam.channelinfo
LOG WARNINGS: /tmp/warnings.txt
#BOXKEY: /dev/ttyUSB0 xx xx xx xx
#SERIAL READER: /dev/ttyUSB0 smartreader+
#SMARTCARD CLOCK FREQUENCY /dev/ttyUSB0 3690000
DISABLE EMM: no
EXTRA EMM LEVEL: no
SHOW TIMING: yesoscam.cfg
[global]
serverip = 127.0.0.1
usrfile = /var/camlogs/oscam/oscamuser.log
logfile = /var/camlogs/oscam/oscam.log
cwlogdir = /var/camlogs/oscam/cw.log
emmlogdir = /var/camlogs/oscam/emm.log
disableuserfile = 0
loghistorysize = 2048
usrfileflag = 1
nice = 0
maxlogsize = 2048
preferlocalcards = 1
saveinithistory = 1
dropdups = 1
lb_savepath = /var/camlogs/oscam[monitor]
port = 988
aulow = 120
hideclient_to = 15
monlevel = 4
appendchaninfo = 0[newcamd]
port = xxxx
serverip = 127.0.0.1
key = 0102030405060708091011121314
allowed = 127.0.0.1,192.168.x.x-192.168.x.x
keepalive = 1
mgclient = 1[cs357x]
port = xxxx
serverip = 192.168.1.10[cccam]
port = xxxx
reshare = 0
forward_origin_card = 1
version = 2.2.1
stealth = 1
nodeid =
reshare_mode = 1[webif]
httpport = 16002
httpuser = card
httppwd = server
httprefresh = 10
httpallowed = 192.168.x.x-192.168.x.x
httpdyndns =oscam.server
[reader]
label = ***_uk
protocol = pcsc
device = 0
caid = 0963
detect = cd
ident = 0963:0000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
lb_weight = 101oscam.user
[account]
user = server1
pwd = server2
description =
disabled = 0
uniq = 1
group = 1
au =
caid = 0963:000000please hope you can help me thanks
-
hi all ive got a cccam server at the moment and it going strong. but time has come to want to have more cards.
so i was wondering what server i would need to have sly uk card , tring , viasat , jsc etc working in same server.
would i have to use oscam/newcs is there even a setup for this or does oscam read all of these cards. will they update ect.
once i know where to go ill get my head round it.thanks if you help me
-
brandnew dm800 wouldnt flash with web browser so used dreamup now it wont turn on only has network lights on back
what the hell can i do to recover this as its not mine im gutted cant get it to connect to anything -
is setting up the usals mate the same as dm 500 mate
-
Hi everyone would really like your support on best dm800 clone image and how to falsh it over to box is it the same process as a 500
always just installed 500s for clients but fitting a 800 tomoz would really like to know how to go on -
hi everyone anyone know where this match is showing tomoz
would love it if you can find out for is ive looked but found nothing -
hi mate i set alot of motorised dishes up and to be honest the bracket your using how on earth do you make that plumb on the level that bracket has to be perfectly plumb both ways or you wont get viasat at all mate. i would use a t&k bracket so you can plumb the pole up perfect.
-
if you have another dm800 handy you could get dreamup to read the 800 thats working then quickly swap over with 800 thats not then it should flash again. only thing is you need a working another working 800
-
is that 256 trick and who is the one with bad setup me or my peer
-
hi everyone again im just asking the bit in cs studio where it says fake.
and most of my peers say ok in green but i have 2 that say nok in red is this anything to worrie about.
-
you are the man i tried to update with cs studio but with no success but i went in to cs studio files in c: drive and updated the channel and provider info manually and hay presto ive got it working champion thankyou for your help im over the moon
-
hey you might be right ill have a look now
-
how dop i make pictures bigger for you all to see
-
my setup is ubuntu 10.4 lts server i have everything where it should be in cccam config
but it just wont show who my providers are on some of my shares and its quite annoying as i dont no what i have more or less ofbb960defcb34fc4d8855be5.png
b4a8352ae912bd.png -
hi everyone this question has got me pulling me hair out and its annoying me as i dont know what shares ive got.
in easy config and cs studio my shares are coming up like this well nearly most of them. ive tried putting channel list and provider list in to my
server loads of diffrent way automatic upload and putting in to var config manual.can anyone shed some light on this id be over the moon if anyone knows the score.
500 : 41700
500 : 42200
500 : 42300
500 : 4240
500 : 42700
500 : 43800
500 : 43800
500 : fff4a0 Ident-Card -
tell me if im thick but im thinking of buying a vu duo but im wondering
how do you use the dual tuner on a multi sat setup do you have to have
to have one cable going to one tuner for multi and one fixed dish say uk to other tuner
im puzzled