you can download ncam powersat from download panel blu blu batton
Posts by voyger
-
-
maybe don't work because you haven't the right configuration
-
new image Power-Sat-1.1b7-dm520-2017 05 24
Tue, 23 May 2017 09:01:23 +0000 (11:01 +0200)]
update enigma2:*4.3.1r7
-*allow*to*downscale*with*factors*up*to*225
-*eMediaDatabase/DatabasePlaylist:*allow*to*presizing*cover*arts,*use*300x300*as*default
-*fixed*linked*and*"satpos*depend"*tuner*handling
-*fixed*motor*turning*with*enabled*power*measurement
**(broken*since*4.3.1r5)
download link -
new Power-Sat-1.1b7-dm820-2017-05-24
Tue, 23 May 2017 09:01:23 +0000 (11:01 +0200)]
update enigma2:*4.3.1r7
-*allow*to*downscale*with*factors*up*to*225
-*eMediaDatabase/DatabasePlaylist:*allow*to*presizing*cover*arts,*use*300x300*as*default
-*fixed*linked*and*"satpos*depend"*tuner*handling
-*fixed*motor*turning*with*enabled*power*measurement
**(broken*since*4.3.1r5)
your powersat team
download link
http://www.power-sat.org/power-plus/index.php?dir=Powersat_2.5/immagini_powersat_dm820_OE2.5/&file=Power-Sat-1.1b7-dm820-20170524152152.rootfs.tar.xz -
new Power-Sat-1.1b7-dm7080-2017-05-24
Tue, 23 May 2017 09:01:23 +0000 (11:01 +0200)]
update enigma2:*4.3.1r7
-*allow*to*downscale*with*factors*up*to*225
-*eMediaDatabase/DatabasePlaylist:*allow*to*presizing*cover*arts,*use*300x300*as*default
-*fixed*linked*and*"satpos*depend"*tuner*handling
-*fixed*motor*turning*with*enabled*power*measurement
**(broken*since*4.3.1r5)
download link -
last image-Power-Sat-1.1b7-dm900-2017 05 24
Tue, 23 May 2017 09:01:23 +0000 (11:01 +0200)]
enigma2:*4.3.1r7
-*allow*to*downscale*with*factors*up*to*225
-*eMediaDatabase/DatabasePlaylist:*allow*to*presizing*cover*arts,*use*300x300*as*default
-*fixed*linked*and*"satpos*depend"*tuner*handling
-*fixed*motor*turning*with*enabled*power*measurement
**(broken*since*4.3.1r5)
download link -
powersat image update 02/05/2017
enigma2: update to 4.3.1r4
- fixed some listbox problems (since 4.3.1r3)
- fixed crash in manual scan (since 4.3.1r3)
- fixed memory leak (since 4.3.1r3)
- fixed tuner config problems ... sometimes the SCR was not stored per LNByou can update the image via software update
enjoy your powersat team
-
powersat image update 02/05/2017
enigma2: update to 4.3.1r4
- fixed some listbox problems (since 4.3.1r3)
- fixed crash in manual scan (since 4.3.1r3)
- fixed memory leak (since 4.3.1r3)
- fixed tuner config problems ... sometimes the SCR was not stored per LNByou can update the image via software update
enjoy your powersat team
-
powersat image update 02/05/2017
enigma2: update to 4.3.1r4
- fixed some listbox problems (since 4.3.1r3)
- fixed crash in manual scan (since 4.3.1r3)
- fixed memory leak (since 4.3.1r3)
- fixed tuner config problems ... sometimes the SCR was not stored per LNByou can update the image via software update
enjoy your powersat team
-
powersat image update 02/05/2017
enigma2: update to 4.3.1r4
- fixed some listbox problems (since 4.3.1r3)
- fixed crash in manual scan (since 4.3.1r3)
- fixed memory leak (since 4.3.1r3)
- fixed tuner config problems ... sometimes the SCR was not stored per LNByou can update the image via software update
enjoy your powersat team
-
Power-Sat-1.1b1-dm900-2017-04-28 new
Update 25/04/2017
Enigma2 Update
4.3.1r3
- added Durline UCP20 V2 (with different SCR frequencies) to supported unicable switches
- increase unicable delay after switch command
- ServiceList: refresh every full minute while open
- GraphMultiEpg: fixed wrong prime time (patch from dre ... thanks!)
- VirtualKeyboard: fixed layouts with more than 5 lines and add ru_RU
- CeC:
- minor fixes
- fixed "tv power on" detection in some cases (Samsung and probably others, too)
- added reset option to CeC-Setup, set's all options to default
- fixed bus errors when trying to acces files on dead storage (e.g. network mounts)
- fixed some issues with widget animation enabling/disabling
- fixes broken "blinking" and
- fixes custom animations for widgets when defaults are disabled
- properly fixed issues with eListBoxPythonMultiContent and animations
- raise RLIMIT_NOFILE to 8k min (soft & hard) on enigma2 startup
(fixes ION-related crashes when a lot of pixmaps are being cached/held)
- restate some strings
update dm820/dm7080 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- some CEC fixes and improvements
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problem
update dm52x/dm900 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- fixed lame CEC bus in standby
- some CEC fixes and improvements
DM900:
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problemyour powersat team
-
Power-Sat-1.1b1-dm520-2017-04-28 new
Update 25/04/2017
Enigma2 Update
4.3.1r3
- added Durline UCP20 V2 (with different SCR frequencies) to supported unicable switches
- increase unicable delay after switch command
- ServiceList: refresh every full minute while open
- GraphMultiEpg: fixed wrong prime time (patch from dre ... thanks!)
- VirtualKeyboard: fixed layouts with more than 5 lines and add ru_RU
- CeC:
- minor fixes
- fixed "tv power on" detection in some cases (Samsung and probably others, too)
- added reset option to CeC-Setup, set's all options to default
- fixed bus errors when trying to acces files on dead storage (e.g. network mounts)
- fixed some issues with widget animation enabling/disabling
- fixes broken "blinking" and
- fixes custom animations for widgets when defaults are disabled
- properly fixed issues with eListBoxPythonMultiContent and animations
- raise RLIMIT_NOFILE to 8k min (soft & hard) on enigma2 startup
(fixes ION-related crashes when a lot of pixmaps are being cached/held)
- restate some strings
update dm820/dm7080 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- some CEC fixes and improvements
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problem
update dm52x/dm900 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- fixed lame CEC bus in standby
- some CEC fixes and improvements
DM900:
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problemyour powersat team
-
Power-Sat-1.1b1-dm820-2017-04-28-new
Update 25/04/2017
Enigma2 Update
-4.3.1r3
- added Durline UCP20 V2 (with different SCR frequencies) to supported unicable switchesincrease unicable delay after switch command
- ServiceList: refresh every full minute while open
- GraphMultiEpg: fixed wrong prime time (patch from dre ... thanks!)
- VirtualKeyboard: fixed layouts with more than 5 lines and add ru_RU
- CeC:
- minor fixes
- fixed "tv power on" detection in some cases (Samsung and probably others, too)
- added reset option to CeC-Setup, set's all options to default
- fixed bus errors when trying to acces files on dead storage (e.g. network mounts)
- fixed some issues with widget animation enabling/disabling
- fixes broken "blinking" and
- fixes custom animations for widgets when defaults are disabled
- properly fixed issues with eListBoxPythonMultiContent and animations
- raise RLIMIT_NOFILE to 8k min (soft & hard) on enigma2 startup
(fixes ION-related crashes when a lot of pixmaps are being cached/held)
- restate some strings
update dm820/dm7080 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- some CEC fixes and improvements
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problem
update dm52x/dm900 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- fixed lame CEC bus in standby
- some CEC fixes and improvements
DM900:
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problemyour powersat team
-
Power-Sat-1.1b1-dm7080-2017-04-28 new
Update 25/04/2017
Enigma2 Update
4.3.1r3
- added Durline UCP20 V2 (with different SCR frequencies) to supported unicable switches-increase unicable delay after switch command
- ServiceList: refresh every full minute while open
- GraphMultiEpg: fixed wrong prime time (patch from dre ... thanks!)
- VirtualKeyboard: fixed layouts with more than 5 lines and add ru_RU
- CeC:
- minor fixes
- fixed "tv power on" detection in some cases (Samsung and probably others, too)
- added reset option to CeC-Setup, set's all options to default
- fixed bus errors when trying to acces files on dead storage (e.g. network mounts)
- fixed some issues with widget animation enabling/disabling
- fixes broken "blinking" and
- fixes custom animations for widgets when defaults are disabled
- properly fixed issues with eListBoxPythonMultiContent and animations
- raise RLIMIT_NOFILE to 8k min (soft & hard) on enigma2 startup
(fixes ION-related crashes when a lot of pixmaps are being cached/held)
- restate some strings
update dm820/dm7080 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- some CEC fixes and improvements
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problem
update dm52x/dm900 hardware drivers
- CEC:
- add some debug output and make debug output better readable
- fixed lame CEC bus in standby
- some CEC fixes and improvements
DM900:
- si2166b/si2169c:
- add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
- fixed possible deadlock on blindscan
- si2166b: firmware update
- si2169c:
- fixed DVB-T(2) 5V switching
- add better readable debug output
- disable 5V when tuner switches to sleep
- fixed possible rf_switching problemyour powersat team
-
powersat*oscam-emu*and powersat *oscam-armV711384 normal tested on dm900 ok
powersat-oscam-armV711384-by daimon
powersat-oscam-emu-armV7- 11384 by daimon
powersat-oscam-armV711384-by daimon
powersat-oscam-emu-armV7- 11384 by daimon -
powersat*oscam-emu*and powersat *oscam-armV711384 normal tested on dm900 ok
powersat-oscam-armV711384-by daimon
powersat-oscam-emu-armV7- 11384 by daimon -
this Gcam they are oscam derogative don't get why people rash to have them
get the original one mate
-
today agiornamento/update 12-4-2017
General:
- fixed spinners not working in some cases
- fixed teletext spamming the logfile (stuffing bytes)
- mount dreambox-data partition to /data if available
- look for picons in /data/picon, too
- fixed display-screenshots
Tuners:
- fixed unavailability of network scan
- fixed tuner defaults for single C/T tuners and multitype C/T tuners
- fixed handling of DVB-T2 PLP IDs (fixes missing freenet-tv services)
- fixed a bunch of minor usability and cosmetical flaws in tuner related dialogs
- improved debug output during scan
- allow auto modulation for all Si216x based frontends in manual scan
Other:
- NimManager: re-add deprecated "getNimType" method
- ePicLoad: fixed flawed svg detection logic
enigma2: 4.3.1r2
you can update the image via software update
best image around test to believed enjoy
your powersat team -
today agiornamento/update 12-4-2017
General:
- fixed spinners not working in some cases
- fixed teletext spamming the logfile (stuffing bytes)
- mount dreambox-data partition to /data if available
- look for picons in /data/picon, too
- fixed display-screenshots
Tuners:
- fixed unavailability of network scan
- fixed tuner defaults for single C/T tuners and multitype C/T tuners
- fixed handling of DVB-T2 PLP IDs (fixes missing freenet-tv services)
- fixed a bunch of minor usability and cosmetical flaws in tuner related dialogs
- improved debug output during scan
- allow auto modulation for all Si216x based frontends in manual scan
Other:
- NimManager: re-add deprecated "getNimType" method
- ePicLoad: fixed flawed svg detection logic
enigma2: 4.3.1r2
you can update the image via software update
best image around test to believed enjoy
your powersat team -
today agiornamento/update 12-4-2017
General:
- fixed spinners not working in some cases
- fixed teletext spamming the logfile (stuffing bytes)
- mount dreambox-data partition to /data if available
- look for picons in /data/picon, too
- fixed display-screenshots
Tuners:
- fixed unavailability of network scan
- fixed tuner defaults for single C/T tuners and multitype C/T tuners
- fixed handling of DVB-T2 PLP IDs (fixes missing freenet-tv services)
- fixed a bunch of minor usability and cosmetical flaws in tuner related dialogs
- improved debug output during scan
- allow auto modulation for all Si216x based frontends in manual scan
Other:
- NimManager: re-add deprecated "getNimType" method
- ePicLoad: fixed flawed svg detection logic
enigma2: 4.3.1r2
you can update the image via software update
best image around test to believed enjoy
your powersat team
