Posts by CyberCrime

  • usb error

    Hi all i did a reinstall today after doing a upgrade. but i keep getting a usb error
    usb 1-8: clear tt 1 (90b4) error -71
    anyone know what this is?


    it all looks like its working and the error only kicks in after about 2hrs?
    i think its something stupid i forgot to install, but can not think what i forgot

  • cacheex mode 3

    all is good with 2 cacheex exchanges mate, mine was working great until i added another and give it 30mins and someones cacheex freezes
    was doing my headin so gave up and setup a perm cacheex server so i would only need 1 cacheex link to my local oscam

  • cacheex mode 3

    I have setup a cacheex only vps and is running great. Only done this because the only version thats stable with cacheex is 6923.
    The only problem with 6923 is my local cards do not like it glitching etc.
    All new versions of Oscam work great with cacheex, no memory leaks and stuff. but there is a problem. when the loopback bug was fixed another bug turned up.
    If you add more that 2 cacheex mode 3 exchanges the new versions will freeze on the cache, its like oscam can not keep up with the filtering of the cache and gives up.
    So i have a cacheex only vps with 6923 and my local oscam can be the most up to date best of both as cache works perfect and as i only have 1 cacheex linked my local oscam works perfect
    If anyone wants to join or test my cacheex server pm me.
    Remember if you use mode 3 (the only mode i use) there is 0% hammering of cards as its only cache and nothing is sent to a card. But you might need a more powerfull server to keep up
    on the user side (where you get the cache from) its best to lower the max hops to where you stop getting glitching, i have mine at 3 hops at the moment and is 100% glitch free (saying that you watch it go tits up lol)
    10 hops works great 90+ cache hits but with glitching

  • CacheEX mode 3, cache only share

    Been looking into cacheex mode 3 shares (cache only) and was given this info,
    I have tried the settings listed and it does work, but eats ram ;)
    ---


    You need at least Oscam 1.20 compiled with cacheex enabled.

    I always use mode 3 cacheEx since that simply gives the best results.

    You need to adjust some settings in oscam:

    CONFIG:
    extra delay: 500
    client timeout: 6000 < IMPORTANT
    fallback timeout: 1600
    cache delay: 10 < IMPORTANT
    client max idle: 120
    global sleep: 0
    suppress cms08: NO
    reader restart seconds: 5
    drop duplicate users: NO
    max cache time: 8 < IMPORTANT
    max cache count: 2500
    ecm doublecheck: NO
    cacheex wait time: 50
    cacheex write statistic: OFF < IF YOU PUT THIS ON, CPU WILL GET A HARD TIME.. ONLY SET TO ON IF YOU WANT TO DEBUG !

    Then restart Oscam and add users/readers this way for cccam protocol:

    USER:
    group: 1 or 2 or 3... (do not leave blank !!!)
    cacheex mode: 3 (reverse cache push)
    cacheex max hops: 10
    Anticascading numusers: 0
    ccc maxhops: -1
    ccc reshare: 3
    ccc ignore reshare: 1 use reshare level of reader or user
    ccc stealt: enable: use oscam <> cccam protocol
    keepalive: ON

    READER:
    group: 1 (or all groups you are using) > so can aso be 1,2,3,4,5 etc > remember that the group you use in the user settings must be also the same here ! so if in user group = 10 then reader must have at least group 10 !
    load balance: 100
    caid: < LEAVE EMPTY !
    drop cw's with wrong checksum: NO
    cacheex mode: 3 (reverse cache push)
    au disabled: yes
    cache ex maxhop: 10
    inactivity timeout: 30
    reconnect timeout: 2
    request timeout: 0
    version: 2.3.0
    maxhop: 0 < these settings are needed this way, otherwise your other clients might see the cache as cards !
    mindown: 15 < these settings are needed this way, otherwise your other clients might see the cache as cards !
    reshare: 3
    want emu: NO
    keep alive: NO


    Note that if you check the status of the reader, it will say: NEEDINIT (0 of 0 card); thats normal. Behind the cacheEx-tab you will see if the cacheEx works.


    UPDATE
    After more digging and doing some tests, It's best not to have the reader and user in the same group for mode 3 (it maybe ok for mode 1 and 2 but i have not tested them)
    mode 3 will push all cache to all other mode 3 peers, so if all in one group you get a loop.


    something like oscam 1 pushes all it's cache to oscam 2, them oscam 2 will push all that cache to all other mode 3 cacheex in the same group including back to oscam 1 so you get a loop.
    so it looks like it works best like this


    User Group 1 - Reader Group 2,3,4, 5,6,7
    User Group 2 - Reader Group 1,3,4, 5,6,7
    User Group 3 - Reader Group 1,2,4, 5,6,7
    User Group 4 - Reader Group 1,2,3, 5,6,7


    that way you still push all the cache to other cacheex mode 3 peers but not back to the original oscam that you got the cache from so breaking the loop

  • Oscam / CSP

    I have Oscam setup on a small linux server. all working ok
    but it looks like more and more people are using CSP.
    what are the advantages of CSP?

  • preset channels

    Hi all, I'm thinking about trying Black Hole image at the moment i have ViX on my Ultimo.
    Can you download preset channels from the plugin menu like you can on ViX?