Posts by graham1981

ah great stuff, so i just add my friend as an F line in CCcam.cfg ?

=) We have a little progress!, card is now reading nicely!. I was using a crappy USB to serial adapter, now im not and its working like a charm.

But...... I can see all the entitlements in Oscam, but none in CCcam. Any ideas?

yeah none of the above in cccam.config

Quote from Ten Below

You will see this by following the link in post #15, i think the problem is your usb reader is not installed/configured correctly. Hopefully another member has the same reader & can advise, Check against this Tutorial: How to install Infinity USB programmer on a Debian with CCcam

Hiya, I have looked at that, but its only for CCCam and not Oscam as the reader, the config files that are there are

SERIAL READER : /dev/ttyS0
SMARTCARD CLOCK FREQUENCY : /dev/ttyS0 3570000
TRY ALL CHIDS : /dev/ttyS0
BOXKEY : /dev/ttyS0 XX XX XX XX
SERVER LISTEN PORT : XXXXX

would any of that be able to be added to Oscam.server or would it go into CCCam.Cfg its just confusing because i was under the impression the reason we use oscam rather than cccam to read the cards is because its more reliable etc.

Quote from musogeek

no harm in trying the other frequencies

Tried them, still the same

2011/12/17 22:57:24 82497D8 r reader ***uk initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/12/17 22:57:25 0 ***uk card detected
2011/12/17 22:57:29 82497D8 r ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2011/12/17 22:57:31 82497D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/17 22:57:34 82497D8 r card system not supported
2011/12/17 22:57:34 82497D8 r Normal mode failed, reverting to Deprecated Mode
2011/12/17 22:57:38 82497D8 r ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2011/12/17 22:57:39 82497D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/17 22:57:45 82497D8 r card system not supported
2011/12/17 22:57:45 82497D8 r card initializing error
2011/12/17 22:57:45 0 s init for all local cards done

Feel so close to getting it working.... but card system not supported?

ok, how do i get to that? sorry for being a pain =)

Quote from musogeek

Your card was working today in the original receiver and you are getting a card initializing error, so I don't think you have an entitlement issue. Your card is not being read properly. Can't see anything in your configs and you have tried what we suggested. You said yourself your reader was years old, maybe it is time to get another one:feel_good:

Well its funny you say that, i do have a Gem plus twin device, any idea on getting that put to use?

Entitlements for slyuk

Cardsystem Valid To IRD ID (nagra) Provider
unknown n/a FF FF FF FF
Serial Rom ATR
0000000000000000 3F FD 13 25 02 50 00 0E 33 B1 0F 69 FE 4A 50 D0 00 00 53 59 03
Type Caid Provid ID Class Start Date Expire Date Name

The clock frequency on my usb infinity (phoenix mode) is 3.68, is that ok?

Thanks for all your help. still not working though,

lastest oscam log is

2011/12/17 22:38:19 0 s 37 tier-id's loaded
2011/12/17 22:38:19 0 s 1000 provid's loaded
2011/12/17 22:38:19 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2011/12/17 22:38:19 0 s Starting listener 0
2011/12/17 22:38:19 0 s monitor: disabled
2011/12/17 22:38:19 0 s Starting listener 0
2011/12/17 22:38:19 0 s camd35: disabled
2011/12/17 22:38:19 0 s Starting listener 0
2011/12/17 22:38:19 0 s cs378x: disabled
2011/12/17 22:38:19 0 s Starting listener 0
2011/12/17 22:38:19 0 s newcamd: initialized (fd=4, port=10000, crypted)
2011/12/17 22:38:19 0 s -> CAID: 0963 PROVID: 000000
2011/12/17 22:38:19 0 s Starting listener 0
2011/12/17 22:38:19 0 s pandora: disabled
2011/12/17 22:38:19 0 s Starting listener 0
2011/12/17 22:38:19 0 s radegast: disabled
2011/12/17 22:38:19 0 s http thread started
2011/12/17 22:38:19 0 s reader check thread started
2011/12/17 22:38:19 0 s check thread started
2011/12/17 22:38:19 0 s creating thread for device /dev/ttyUSB0
2011/12/17 22:38:19 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/12/17 22:38:19 0 s waiting for local card init
2011/12/17 22:38:19 8970FD0 h HTTP Server listening on port 8888
2011/12/17 22:38:21 896F7D8 r reader ***uk initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/12/17 22:38:22 0 ***uk card detected
2011/12/17 22:38:26 896F7D8 r ATR: 83 40 37
2011/12/17 22:38:26 896F7D8 r ERROR: Could not read reader->convention
2011/12/17 22:38:26 896F7D8 r Error activating card.
2011/12/17 22:38:31 896F7D8 r ATR: 3F FD 13 25 02 50 00 0F 32 B0 0E 69 FF 4A 50 D1 00 00 53 59 02
2011/12/17 22:38:33 896F7D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/17 22:38:36 896F7D8 r card system not supported
2011/12/17 22:38:36 896F7D8 r Normal mode failed, reverting to Deprecated Mode
2011/12/17 22:38:40 896F7D8 r ATR: 3F FD 13 25 02 50 00 0E 33 B1 0F 69 FE 4A 50 D0 00 00 53 59 03
2011/12/17 22:38:41 896F7D8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/17 22:38:42 896F7D8 r card system not supported
2011/12/17 22:38:42 896F7D8 r card initializing error
2011/12/17 22:38:42 0 s init for all local cards done
2011/12/17 22:38:42 0 s anti cascading disabled
2011/12/17 22:38:42 8975848 c client connected to 10000 port
2011/12/17 22:38:42 8975848 c anonymous disconnected from 127.0.0.1
2011/12/17 22:38:42 8975848 c thread B6C9FB70 ended!
2011/12/17 22:38:42 89740E0 c client connected to 10000 port
2011/12/17 22:38:42 89740E0 c anonymous disconnected from 127.0.0.1
2011/12/17 22:38:42 89740E0 c thread B74E8B70 ended!

I have not added the boxkey from original box, as I am under the impression that Oscam can read it from the ccard?

Quote from musogeek

When was the last time this white UK card was used?

It was used today in my sly box, wanted to make sure it worked =)

Hi, no entitlements shown it just says You have to set saveinithistory=1 in your config to see Entitlements!

Quote from musogeek

This would happen if your frequency is wrong, or there is an issue with the card or reader. I would think the issue is physical, because it should work at the frequency it is initialising on. If your card is ok in the original box then there might be a problem with the reader. You didn't set a frequency in your reader entry in oscam.server. In mine i add;

but I am not sure if this would make a difference because I think it should still work how it is if there wasn't any other issues.

I had a similar issue with the same resulting log, and it turned out to be a bad card.

Display More

Thanks, i have tried that, does it make a difference if the protocol is changed from mouse to newcamd ?

This is from CCCam

Server connections: 1
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+
| Host | Connected | Type | Version| NodeID | Cards | CAID/Idents |
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+
|127.0.0.1:10000 |00d 00:02:06|newcamd| | | 1 | |
+----------------------+------------+-------+--------+----------------+-------+-------------------------------+

New log from Oscam
2011/12/17 21:33:07 0 s client max. idle=120 sec, debug level=0
2011/12/17 21:33:07 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/12/17 21:33:07 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/12/17 21:33:07 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/17 21:33:07 0 s signal handling initialized (type=sysv)
2011/12/17 21:33:07 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/17 21:33:07 0 s 37 tier-id's loaded
2011/12/17 21:33:07 0 s 1000 provid's loaded
2011/12/17 21:33:07 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2011/12/17 21:33:07 0 s Starting listener 0
2011/12/17 21:33:07 0 s monitor: disabled
2011/12/17 21:33:07 0 s Starting listener 0
2011/12/17 21:33:07 0 s camd35: disabled
2011/12/17 21:33:07 0 s Starting listener 0
2011/12/17 21:33:07 0 s cs378x: disabled
2011/12/17 21:33:07 0 s Starting listener 0
2011/12/17 21:33:07 0 s newcamd: initialized (fd=5, port=10000, ip=127.0.0.1, crypted)
2011/12/17 21:33:07 0 s -> CAID: 0693 PROVID: 000000
2011/12/17 21:33:07 0 s Starting listener 0
2011/12/17 21:33:07 0 s pandora: disabled
2011/12/17 21:33:07 0 s Starting listener 0
2011/12/17 21:33:07 0 s radegast: disabled
2011/12/17 21:33:07 0 s http thread started
2011/12/17 21:33:07 0 s reader check thread started
2011/12/17 21:33:07 0 s check thread started
2011/12/17 21:33:07 0 s creating thread for device /dev/ttyUSB0
2011/12/17 21:33:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/12/17 21:33:07 0 s waiting for local card init
2011/12/17 21:33:07 9FF60B0 h HTTP Server listening on port 8888
2011/12/17 21:33:09 9FF48B8 r reader ***uk initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/12/17 21:33:10 0 ***uk card detected
2011/12/17 21:33:14 9FF48B8 r ATR: 3F FD 13 25 02 50 00 0E 33 B0 0F 69 FE 4A 50 D0 00 00 53 58 02
2011/12/17 21:33:16 9FF48B8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/17 21:33:17 9FF48B8 r card system not supported
2011/12/17 21:33:17 9FF48B8 r Normal mode failed, reverting to Deprecated Mode
2011/12/17 21:33:20 9FF48B8 r ATR: 3F FD 13 25 02 50 00 0E 33 B0 0E 69 FE 4A 50 D0 00 00 53 58 02
2011/12/17 21:33:21 9FF48B8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/17 21:33:22 9FF48B8 r card system not supported
2011/12/17 21:33:22 9FF48B8 r card initializing error
2011/12/17 21:33:23 0 s init for all local cards done
2011/12/17 21:33:23 0 s anti cascading disabled
2011/12/17 21:33:23 9FF8588 c client connected to 10000 port
2011/12/17 21:33:23 9FF8588 c anonymous disconnected from 127.0.0.1
2011/12/17 21:33:23 9FF8588 c thread B73ABB70 ended!
2011/12/17 21:33:26 9FF9D20 c client connected to 10000 port
2011/12/17 21:33:26 9FF9D20 c encrypted newcamd:10000-client 127.0.0.1 granted (test1, au=off)
2011/12/17 21:33:26 9FF9D20 c user test1 authenticated successfully (CCcam)
2011/12/17 21:33:26 9FF9D20 c AU disabled for user test1

Quote from Ten Below

I missed this bit

It should be in /var/ect

Ok thanks, I have now moved the config to the correct collection, but no change =(

Ok changed the port although if i goto my server and look at the web config for Oscam it still reads needs Init (no entitlements)

2011/12/17 21:05:56 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/12/17 21:05:56 0 s signal handling initialized (type=sysv)
2011/12/17 21:05:56 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/12/17 21:05:56 0 s 37 tier-id's loaded
2011/12/17 21:05:56 0 s 1000 provid's loaded
2011/12/17 21:05:56 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) i***** guessing not loaded
2011/12/17 21:05:56 0 s Starting listener 0
2011/12/17 21:05:56 0 s monitor: disabled
2011/12/17 21:05:56 0 s Starting listener 0
2011/12/17 21:05:56 0 s camd35: disabled
2011/12/17 21:05:56 0 s Starting listener 0
2011/12/17 21:05:56 0 s cs378x: disabled
2011/12/17 21:05:56 0 s Starting listener 0
2011/12/17 21:05:56 0 s newcamd: initialized (fd=5, port=10000, ip=0.0.39.60, crypted)
2011/12/17 21:05:56 0 s -> CAID: 1234 PROVID: 000005
2011/12/17 21:05:56 0 s Starting listener 0
2011/12/17 21:05:56 0 s pandora: disabled
2011/12/17 21:05:56 0 s Starting listener 0
2011/12/17 21:05:56 0 s radegast: disabled
2011/12/17 21:05:56 0 s http thread started
2011/12/17 21:05:56 0 s reader check thread started
2011/12/17 21:05:56 0 s check thread started
2011/12/17 21:05:56 0 s creating thread for device /dev/ttyUSB0
2011/12/17 21:05:56 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/12/17 21:05:56 0 s waiting for local card init
2011/12/17 21:05:56 A0640B0 h HTTP Server listening on port 8888
2011/12/17 21:05:59 A0628B8 r reader ***uk initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/12/17 21:05:59 0 ***uk card detected
2011/12/17 21:06:04 A0628B8 r ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 68 (left some of ATR off)

Hello, thanks for taking the time to read my post. I am needing some help in getting a server runnning,

I currently have Debian 6 installed on a dedicated machine, and have used the auto-install script(Automated Oscam/CCcam 2.1.3 Install Package For Debian 6) to install the required files etc

I have installed an old card reader that I used to use in the cable scene a few years back, its a USB infinity, This has installed ok and is now in phoenix mode (3.68)

My problem is no matter how many times i have tried I can not get my card reader to share the card from Oscam, its a white uk card. I have now re-installed the system back to default settings and then ran the auto script again, so everything is at square one, I have already installed the usb infinity card reader.

I should point out that the card reader does see the card, but currently Oscam is saying status : NEED INIT (no entitlements)

I have included the config files below, they have not been touched other than adding my reader to oscam.server

Oscam.Server

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn build #6059
# Read more: http://streamboard.gmc.to/svn/…/doc/txt/oscam.server.txt

[reader]
label = ***UK
protocol = mouse
device = /dev/ttyUSB0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 1
blockemm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

Oscam.Conf

[global]
nice =
WaitForCards =
preferlocalcards =
ClientTimeout =
CacheDelay =
saveinithistory =
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10002@1234:5

Oscam.user

[account]
user = test1
pwd = test2
group = 1

I currently have CCCam.Cfg in /Emu/CCcam/

SERVER LISTEN PORT : 12000
ALLOW TELNETINFO: yes
ALLOW WEBINFO: yes
WEBINFO USERNAME :root
WEBINFO PASSWORD :dreambox
TELNETINFO USERNAME :root
TELNETINFO PASSWORD :dreambox
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
ZAP OSD TIME :0
OSD USERNAME :root
OSD PASSWORD :dreambox
OSD PORT :80
SHOW TIMING : yes
DEBUG : no
NEWCAMD CONF : yes
#DISABLE EMM : yes
#EXTRA EMM LEVEL : yes
SHOW EXTENEDED CLIENT INFO : yes
MINI OSD : no
#MINIMUM DOWNHOPS: 1
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
PROVIDERINFO FILE : /var/etc/CCcam.providers
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
#STATIC CW FILE : /var/keys/constant.cw
#BOXKEY: /dev/sci0
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6800000

N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

I really hope someone can help me get started, i feel so close, yet so far lol