in 2nd box
as that was what you asked for
ask yourself have I got a card in 2nd box ?
if the answer is NO
then you do need it
If you want to use OScam for watching TV (not only for reading cards) you need to add these lines to oscam.conf FILE:
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
#------------------------------------------------------------------------------#
#
I: 1814 ;
P: 0100:005221 ; MEO PT DHT (30W)
P: 0100:005225 ; MEO RFU
P: 0100:005211 ; MEO (30W)
P: 1802 ;
P: 1802:004801 ;
P: 1802:004901 ; ZonTV/Cabo (30.0W)
M: 1814 0100:005221,000007
#
#------------------------------------------------------------------------------#
i use this
maybe you do or you don't
its upto you
number 1 box
IN OSCAM CONFIG
[cs357x]
serverip = 192.168.0.6 # the IP of server of 1st box
port = 11000 # any unused port
keepalive = 1
in oscam user
[account]
user= hs5424
pwd= hs5424
group=1
number 2 box
oscam server
[reader]
label = box1=1814
protocol = cs357x # in older versions of oscam put camd35
device = 192.168.0.6,11000 # ist box IP and Port
user = hs5424
password = hs5424
group = 1
caid = 1814:0100,0100
ident = 0100:005211,005221,005225;1814:005211,005221,005225,000000,000007
emmcache = 1,3,2
if you want it be shown as a real card in 2nd box
add to reader
services=meo
and make sure you have them in the 2nd box
in oscam dvbapi
M: 1814 0100:005221,000007
you may need to assign the port in your router and use UDP
have you tried to share it in
[cs357x]
share
its the best way to homeshare
i use this in oscam dvbapi
M: 1814 0100:005221
im using a dm500s as server
but using nos card
and bypass a c-line in oscam from a family member
to act as sever
but I've never got a MEO card to work in dm500
I allways put that down to not receiving signal as its got nothing to decrypt
a
Hispasat 30W All Meo frequencies
12130.00 H DVB-S2 8PSK 27500 3/4
12168.00 H DVB-S2 8PSK 27500 3/4
12207.00 H DVB-S2 8PSK 27500 3/4
12246.00 H DVB-S2 8PSK 27500 3/4
12284.00 H DVB-S2 8PSK 27500 3/4
12398.00 H DVB-S2 8PSK 27500 3/4
12476.00 H DVB-S2 8PSK 27500 3/4
you wont OPEN or VIEW
ANY
esculpa
Dm500s
with MEO ?
didnt think dm500s open HD channels
as most if not all are
dvb-S2 not aviailable
and only some NOS about 12 of them
non dvb-s2
It is 100% new
did you install the image that's being used
and have you got any working cam ?
Octagon SF4008
is it new or 2nd hand or from a dealer
as i think its got a personal password
from your snapshot
im sure you have wrong info
that's my snapshot
see modulation 8PSK
oh you may need to use manual scan
anyway if it was me
I would just install an already made channel list
https://linuxsat-support.com/f…uet-Channel-List-Download
all that you need is there
including satellites.xml
Hello everybody,
I would like to know if someone could help me, I bought a Vu Solo 4k. I cannot configure the tuners.
I have two satellite dishes one pointed to the 28e and is using the tunner A, and another to the 30w in tunner B, when the Tunner A opens all paid channels, the tunner B only opens the channels free, if I exchange the cables the opposite happens. Could anyone help me to configure the tunner to open the paid channels in the both, I am using Mgcamd 1.35.
Thanks in advance.
HI there,
I have single port lnb,
I have peer from friends.
My case already discovered the tunner configuration is correct, the problem is that the oscam is not reading properly.
what are you using Mgcamd 1.35. or oscam
oh well
streamboard
also gives you info on dvbapi
and user settings PM supplied
have fun
[newcamd]
port = 11000@0500:043800;11000@0100:000068
key = 0102030405060708091011121314
keepalive = 1
must be different ports
erinville
I do know that if you ask in the right part of the forum you may get more answers
i don't think dreambox make a bootloader for an Edison OS Mini
[MENTION=14575]canthackit[/MENTION]
never offended
glad to have helped you
ask again if needed
[MENTION=14575]canthackit[/MENTION]
did you also forget to mention what I sent you
your config works
wait 2 mins then it opens
I sent you the most basic config for dvbapi to work
as from reading your config that's all you needed
make it simple and it works
anyway well done you got it working
have fun
[MENTION=14575]canthackit[/MENTION]
as joeuser once told me
oscam.user is not necessary for just watching. The user will just show up as anonymous.
if I were you id look elsewhere other than your config
as I assure you all is well on that part
so look at where it goes
and the right attribute ie 755
other than that you can allways go back to the nemsis image
as I believe you know how you got that to work
its the same
oh 1 other thing are you using icons in oscam
if not remove
httpshowpicons = 1
iit slows it down
