Posts by birali
-
-
Hello Birali,
thanks.
I've made an OTA update and everithing is fine now, with ATV7 and even Netflix 4k.
I have an other problem.
I can't make work the oscam with my nagra channels. Do you have any idea for me ?
unfortunately,No information on this subject..
-
-
Hello
the above alpha version ...
follow the beta version here .......https://linuxsat-support.com/thread/126323-u5pvr-android-tv-7-first-beta-firmware/
-
U5PVR Android TV 7 First Beta Firmware
-
How to recover U5PVR Deluxe.
1. Download below file from link
https://drive.google.com/file/…JaEFuWW8/view?usp=sharing
2. Unzip file on your PC.
3. Try to execute HiTool.exe.
4. If you can't execute HiTool.exe, please install Java(Ver 1.8), then you can execute this.
5. After executing HiTool.exe, you have to select Device ID to erase EMMC.
6. Select Hi3798CV200.
7.After select Hi3798CV200, then you will see below picture, then select HiBurn.
8. then you will see below photo.
9. Now, ready to erase EMMC.
10. Connect RS232 cable to PC to U5PVR.
11. If you connect RS232 cable to PC to U5PVR, then it is ready to erase EMMC.
12. Before pressing "Erase ALL" button, please check that you select "Burn EMMC"
13. Press "Erase All" button and turn AC power on U5PVR.
14. Then you will see above message but press OK to erase EMMC.
15. Please turn AC power on from rear panel.
16. Please download below file
https://drive.google.com/open?…uvsSlWArHaZTBHZ1hzVkdsUEU
This is recovery image. after upzip file, you can find 4 files.
Recommend to format your USB Stick with FAT32.
Please copy all(4 files) to your USB stick
17. Insert USB stick to Front USB 2.0 port and turn AC power ON, then you will see "uPdt" message on Front panel.
It means that box is updating with firmware.
It will takes over 3 minutes for all procedures.
17. Please wait until to see "hOnE" message on front panel.
System is recovered.
Thanks....
http://u5pvr.blogspot.com.tr/2…recover-u5pvr-deluxe.html
-
U5PVR Transformation Image
This image will update from ATV 5.1 to ATV 7.0 or from ATV 7.0 to ATV 5.1
ATV7 ==> ATV5.1.......https://drive.google.com/open?id=0B9uvsSlWArHaWVpJMGhxcEJsRjAATV5.1 ==> ATV7
....https://drive.google.com/open?id=0B9uvsSlWArHaTVlUQ2Vpc0tHaHM
-
Dear Botegausen1
I apologize first of all for bad english.....
To install Linux ....
On home Screen, ATV Settings ==> Device ==> About ==> System update ==> Upgrade Online ==> Linux
Follow here....
http://smartstb.net/viewtopic.php?f=73& ... 121851c504
Use any FTP software on the computer and log in with the following name:
Box IP address: example 192.168.x.xxx
Port: 21
User Name: u5pvr
Password: u5pvr
Best Regards -
Firmware Upgrade History : 12 July 2017
Full Version:
https://drive.google.com/open?…uvsSlWArHaeGFtTmJKc0J4LUU
Erase USER DB--------------------------------------------------------------------
Normal Version
https://drive.google.com/open?…uvsSlWArHaX0N5MmExLWlhS3MKEEP USER DB
Bug Fixed.
1. Hanging issue when they play pictures on MediaCenter.
2. Reduce TVH parsing time for E2 DB.
Release revised ChannelEditor.exe u5pvr/APP/ChannelEditor2/ChannelEditor.zip
1. Fixed E2 DB Western Language issue
2. Fixed HispaSAT DB issue.
Dear customer.
We are sorry that we didn't improved many issues but all member in team, we are developing Android TV 7 right now.
So we hope that we can release Android TV 7 on first alpha version on next month. also doing E2 at same time.
and hope that we can take E2/Android 7 system ASAP.
U5 Team. -
WeOS v3.0.1 by OTA for WeTek Play 2 [Android Marshmallow 6.0.1]
To download and apply the update directly from your device, simply access WeUpdate app from My Apps select “On-line Update”.
Or download this file to Local Update:
https://mega.nz/#!N4BTQT7L!r2CTaGnkPjzUfZiScepVMPknchAdhWrcZbQVkQRUn9g
Here are the new features and bug-fixes you will get with the new WeOS 3.0.1
System:
- Kernel Fixes
- Streaming apps in 4K
Apps:
- Added Kodi 17.3
- Aptoide Store updated
WeTV:
- Added XMLTV for Sat
- PG Fixes for ATSC
- Now allows ATSC-T and ATSC-C
To manually update you can download this file
https://mega.nz/#F!8wYXDQQB!HDDJDSeiQkOMVtu9SAc3gwBest Regards Wetek Team
-
openspa-7.1.002-wetekplay-20170601 for sdcard
-
wetekplay-PBNIGMA-VX-6.1-20170515
http://www.pb-download.com/ima…X-6.1-20170515_sdcard.zip
15.5.2017
- Estuary E2 update
- Feeds and feeds sources update (double, consecutive update needed)
- misc updates
Thanks delfi -
WeTek Play PBNIGMA VX 6.1 20170513 For mSDcard ..http://pb-download.com/images/…X-6.1-20170513_sdcard.zip
Wetek Play PBNIGMA-VX 6.1 20170513 For NAND .....
http://pb-download.com/images/…-VX-6.1-20170513_NAND.zip
13.5.2017
- Estuary E2 update
- Kodi update
- misc updates
- NAND version
THX PB-TEAM and Delphi
-
PB rel 6.1 (probe)
Changelog- new E2 code
- new build sys
- Kodi 17.2 rc1+
- kernel changes
- utils updated
- PB Estuary skin major update
- E2 RC + OE RC basic out of the box support (fine tune for OE RC probably needed)
- almost everything compared to the last release.
Thanks delfi
PB-ENIGMA-DEV -
wetekplay-PBNIGMA VX 6.1-probe_sdcard.2017.05.10
-
[Stable] OpenELEC 8.0.2 released
OpenELEC 8.0.2 release has been published. Users running OpenELEC
8.0.0 or later with auto-update enabled will be prompted on-screen to
reboot and apply the update once it has been downloaded and enabled in
some hours. Users running older OpenELEC releases or with auto-update
disabled will need to manually update. If you would like to update from
an older OpenELEC release please read update instructions/advice on the
Wiki before updating. Manual update files can be obtained from the
downloads page.
OpenELEC 8.0.2 is a maintenance release for OpenELEC-8.0 series. The main fixes are:
disable RTL8XXXU driver, which was loaded together with RTL8192CU/EU driver and caused conflicts with some WLAN USB dongles.
add CONFIG_SND_SOC_STA32X and CONFIG_SND_SOC_WM8804_I2C for RPi builds, needed for some RPi Sound modules.
remove 0 byte database files in Kodi, to workaround database upgrade failures in Kodi.
build Kodi with SSE4 support for Generic builds.
fix broken Kodi addon library names for x86_64 builds.
force loading fuse module to fix mounting ntfs and exfat partitions.
update to mesa-17.0.4, dbus-1.10.18, linux-4.9.24 (Generic), linux-4.9.23 (RPi), libdrm-2.4.80 and curl-7.54.0
(Stable) OpenELEC 8.0.2 WeTek Play - Updatefile:(Stable) OpenELEC 8.0.2 WeTek Play -Android Recovery install file:
(Stable) OpenELEC 8.0.2 WeTek Play - Diskimage for SD-Card install file: -
[Stable] OpenELEC 8.0.2 released
OpenELEC 8.0.2 release has been published. Users running OpenELEC
8.0.0 or later with auto-update enabled will be prompted on-screen to
reboot and apply the update once it has been downloaded and enabled in
some hours. Users running older OpenELEC releases or with auto-update
disabled will need to manually update. If you would like to update from
an older OpenELEC release please read update instructions/advice on the
Wiki before updating. Manual update files can be obtained from the
downloads page.
OpenELEC 8.0.2 is a maintenance release for OpenELEC-8.0 series. The main fixes are:
disable RTL8XXXU driver, which was loaded together with RTL8192CU/EU driver and caused conflicts with some WLAN USB dongles.
add CONFIG_SND_SOC_STA32X and CONFIG_SND_SOC_WM8804_I2C for RPi builds, needed for some RPi Sound modules.
remove 0 byte database files in Kodi, to workaround database upgrade failures in Kodi.
build Kodi with SSE4 support for Generic builds.
fix broken Kodi addon library names for x86_64 builds.
force loading fuse module to fix mounting ntfs and exfat partitions.
update to mesa-17.0.4, dbus-1.10.18, linux-4.9.24 (Generic), linux-4.9.23 (RPi), libdrm-2.4.80 and curl-7.54.0
(Stable) OpenELEC 8.0.2 (Aarch64) WeTek Play 2 - Updatefile
(Stable) OpenELEC 8.0.2 (Aarch64) WeTek Play 2 - Diskimage for SD-Card install file:
(Stable) OpenELEC 8.0.2 (Aarch64) WeTek Play 2 -Android Recovery install file: -
[Stable] OpenELEC 8.0.2 released
OpenELEC 8.0.2 release has been published. Users running OpenELEC
8.0.0 or later with auto-update enabled will be prompted on-screen to
reboot and apply the update once it has been downloaded and enabled in
some hours. Users running older OpenELEC releases or with auto-update
disabled will need to manually update. If you would like to update from
an older OpenELEC release please read update instructions/advice on the
Wiki before updating. Manual update files can be obtained from the
downloads page.
OpenELEC 8.0.2 is a maintenance release for OpenELEC-8.0 series. The main fixes are:
disable RTL8XXXU driver, which was loaded together with RTL8192CU/EU driver and caused conflicts with some WLAN USB dongles.
add CONFIG_SND_SOC_STA32X and CONFIG_SND_SOC_WM8804_I2C for RPi builds, needed for some RPi Sound modules.
remove 0 byte database files in Kodi, to workaround database upgrade failures in Kodi.
build Kodi with SSE4 support for Generic builds.
fix broken Kodi addon library names for x86_64 builds.
force loading fuse module to fix mounting ntfs and exfat partitions.
update to mesa-17.0.4, dbus-1.10.18, linux-4.9.24 (Generic), linux-4.9.23 (RPi), libdrm-2.4.80 and curl-7.54.0(Stable) OpenELEC 8.0.2 WeTek Core - Updatefile:
(Stable) OpenELEC 8.0.2 WeTek Core -Android Recovery install file:
(Stable) OpenELEC 8.0.2 WeTek Core - Diskimage for SD-Card install file
http://releases.openelec.tv/Op…Tek_Core.arm-8.0.2.img.gz -
[Stable] OpenELEC 8.0.2 released
OpenELEC 8.0.2 release has been published. Users running OpenELEC
8.0.0 or later with auto-update enabled will be prompted on-screen to
reboot and apply the update once it has been downloaded and enabled in
some hours. Users running older OpenELEC releases or with auto-update
disabled will need to manually update. If you would like to update from
an older OpenELEC release please read update instructions/advice on the
Wiki before updating. Manual update files can be obtained from the
downloads page.
OpenELEC 8.0.2 is a maintenance release for OpenELEC-8.0 series. The main fixes are:
disable RTL8XXXU driver, which was loaded together with RTL8192CU/EU driver and caused conflicts with some WLAN USB dongles.
add CONFIG_SND_SOC_STA32X and CONFIG_SND_SOC_WM8804_I2C for RPi builds, needed for some RPi Sound modules.
remove 0 byte database files in Kodi, to workaround database upgrade failures in Kodi.
build Kodi with SSE4 support for Generic builds.
fix broken Kodi addon library names for x86_64 builds.
force loading fuse module to fix mounting ntfs and exfat partitions.
update to mesa-17.0.4, dbus-1.10.18, linux-4.9.24 (Generic), linux-4.9.23 (RPi), libdrm-2.4.80 and curl-7.54.0
(Stable) OpenELEC 8.0.2 (Aarch64) WeTek Hub - Updatefile:
http://releases.openelec.tv/Op…Tek_Hub.aarch64-8.0.2.tar
(Stable) OpenELEC 8.0.2 (Aarch64) WeTek Hub -Android Recovery install file:http://releases.openelec.tv/Op…Tek_Hub.aarch64-8.0.2.zip
(Stable) OpenELEC 8.0.2 (Aarch64) WeTek Hub - Diskimage for SD-Card install file:http://releases.openelec.tv/Op…_Hub.aarch64-8.0.2.img.gz -
[Stable] OpenELEC 8.0.1 released
To install on SD-Card you MUST update WeTek's Android software to the latest OTA version first
(Stable) OpenELEC 8.0.1 (Aarch64) WeTek Hub - Updatefile:http://releases.openelec.tv/Op…Tek_Hub.aarch64-8.0.1.tar
(Stable) OpenELEC 8.0.1 (Aarch64) WeTek Hub -Android Recovery install file:
http://releases.openelec.tv/Op…Tek_Hub.aarch64-8.0.1.zip
(Stable) OpenELEC 8.0.1 (Aarch64) WeTek Hub - Diskimage for SD-Card install file:
http://releases.openelec.tv/Op…_Hub.aarch64-8.0.1.img.gz