In answer to your question on Chat mate use DreamboxEdit
http://linuxsat-support.com/ch…-edit-latest-version.html
Install this > Find box on your Network
Link this to you box then you can change/modify do what you like to you channel list
Posts by mrgmx
-
-
Can be a number of reasons mate,
Some plugins are receiver or image specific and although go off and install correctly don't work or show on the image?
Some files are old and newer ones are needed? some just have problems lol....i know with Shoutcast and Youtube i had to try a few?
If you open TSPanel you should be able to locate ipk (plugins) that are box/image specific....may be worth clearing out any that have installed already and are not working though?
On reboot plugins installed correctly depending on what they are for will show up in different areas > Plugins Area or Just the Menu or Both lol
You could always use plugins/addons from our DM section that have been tried an tested and install them manually
-
So are you all sorted or do you still need help with anything Buddy?
-
lol Cheers Bud just had to nip out....Glad you got sorted!
Taught by the Best!
-
seems like there may be one that comes with the image (Sorry)
Press
Blue button and then Red button = Black Pole Epg PanelHopefully the EPG will popup and you will be able to set it up and download!
Post back any problems, i wonder whether you may have to remove CrossEPG?
-
You want to configure your EPG or install CROSSEPG if not already on your receiver (use one or the other - i find CrossEPG works great on Vix....haven't tried on BH though?)
info below
-
Your card has those entitlements I presume?
if so also look/check/update your Oscam whitelist?
On iPad so can't locate file but just type whitelist in searchbar and the info should come up
-
Glad you got sorted - Thread Closed!
-
-
Probably gonna have to reflash firmware on it buddy! Then add a different Channel List
It will be quicker and easier then any other type of fixes that im unaware of lol!
-
The Protocol Line should be Smartreader but i know you tried that and it didn't work!
Just try again as that's what it should be and is in my settings lol
description = Reader
protocol = smartreaderYou should get something like the following in the log if all goes well?
2012/11/28 **************** r Found smartreader device 001:004
Failing that look at post #3 in link below may offer some help
http://linuxsat-support.com/li…00-installing-smargo.html
or i wonder if you have an issue with the firmware of your smargo...info here
http://linuxsat-support.com/li…l-smargo-smartreader.html
-
The settings for protocol and device must be like this :
protocol = smartreader
device = 002:007Look at 2nd line of Georges Post!
Device = 002:007
You have it still set to device = Serial:Reader 207
You are using the wrong paramters -
You haven't changed the device format to what GeorgeXL suggested in post #2
-
I'm sure your problem lies around this thread i started when i was a wee nipper in the game
http://linuxsat-support.com/li…-connecting-internet.html
Have a browse of that and see if anything pops up or look in Debian Wiki
NetworkConfiguration - Debian Wiki
If you can't get anywhere post back and i will do some digging tomorrow....im offski for tonight Buddy!
-
nano /etc/network/interfaces
that should get you in and able to change mate?
Add the relevent bits of info
Ctrl + X and Save and Reboot
-
post you interface file mate found in etc/network/interfaces
but if connected via ethernet cable
# The loopback network interface
auto lo
iface lo inet loopback# The primary network interface
auto lo
iface eth0 inet static
address 192.168.1.200 (Static Ip Addy )
netmask 255.255.255.0
broadcast 192.168.1.255
gateway 192.168.1.1 (Default Gateway of Connection)Use this format just change for your details? you can find these by logging into your network detail on another PC! Go to connections and view details..all info for your network will be there apart from the Static Ip which you obviously change to the Server one in interfaces config
-
and another where are you getting your line from? From another Server or Have you a Sub Card in the box?
-
Have you tried any yet buddy?
#7107 seems stable enough been using it a wee while as an update from #6985 which was also pretty stable all with Sly!
Suppose 'stable' can be interrupted as whether its set-up correctly and who you share with e.t.c! TRUST! But either of them should be ok for you!
-
There are so many plugins available but very little info on what they do. Some of them you can tell by their name, but most of them you can't..
Yeah i know the feeling buddy, always best to do a search or have a test yourself and see what they do....just ensure you do regular backups and are aware where plugins are located on your box so you can delete them if any problems!
In answer to your question there is a plugin called MultiQuickButton that when installed will allow you to set-up various things from your remote.....some plugins may work with it some maybe not though?
The New Vix Image has a nice QuickMenu type option that lists various Plugins from your box which i find quiet handy! Not sure if OpenPli can or has the same?
The file in link below should be ok on your box buddy
-
All looks normal mate! That's how it's looks when you start server up! Just going through the process!
Theres nothing that stands out though? Are you Getting any problems?
