I think we should change the firmware see on Russian forum
Posts by rri973
-
-
currently putting 000:005 for Omnikey and / dev/ttyUSB0 (triple Smargo) the system does not seem blocked
lsusb:
Bus 003 Device 005: ID 076b: 3021 OmniKey AG CardMan 3121 (for omnikey)Bus 002 Device 015: ID 0403:6011 Future Technology Devices International Ltd FT4232H Quad HS USB-UART/FIFO IC (for triple smargo)
-
how to configure a triple smargo reader with omnikey player?
when the smargo reader 3 is alone with the device :/ dev/ttyUSB0 (../dev/ttyUSB3) it works fine
well if it is the reader with the omnikey device: 000:005 (or even 000:003) it also works very well
if both readers are put together
triple smargo is blocked after some time
I noted with the command lsusb usb drives position as belowHave you a solution for these readers config put together
I try in vain to solve this problem probably conflict :67:lsusb:
Bus 003 Device 005: ID 076b: 3021 OmniKey AG CardMan 3121Bus 002 Device 015: ID 0403:6011 Future Technology Devices International Ltd FT4232H Quad HS USB-UART/FIFO IC
sorry for the English translation
-
problem solved and if it can help another person
I configured "single block = Ip-no and Name-no" in the configuration -
have you had this kind of problem
I have to manually refresh a reader proximal every 10 seconds to make it work
while I have the same config oscam on both pcI have a pc oscam (1) being proxi camd 3.5 (UDP) to another pc oscam (2)
this one works welloscam pc (2) also put in proxi camd 3.5 (UDP) to oscam pc (1) works just 10 seconds, I have to reset manual (by save the config file reader) the reader of the proxi 2 pc oscam every 10 to work without cut!!!!!!
all pc in oscam proximal have same config.
both are remote oscam pc (dyndns).
if there is a script I'm interested to raffraichr this reader that the proxi or if you have a solution
I'm sweating neurons
sorry for the translationOScamCollection2!
Open Source Conditional Access Module Web Interface r8705 -
-
-
and the triple smargo?
the file can be used or you must change the idproduct and idvendor ? etc ...
-
Hi
I do not think the file OscamCkeck.sh above is good my Pc 0scam can do a control every five minutes on my linux pc (my crontab contains the command * / 5 **** root / var / script / OscamCkeck sh.)
I note as a directory (ccamlog) in / var / ccamlog / Osacmckeck.h, while I do not see this directory in my linux
that must be done before I make a stupidity changing anything ..
thousand excuses for the translation......file on my pc oscam
#!/bin/sh
process=`ps auxwww | grep oscam | grep -v grep | awk '{print $1}'`
if [ -z '$process' ]; then
echo "Couldn't find Oscam running. Restarting server-binary" >> /var/cccamlog/oscam.check
echo && date >>/var/cccamlog/oscam.check
/usr/local/bin/oscam >> /var/cccamlog/Oscam.log &
else echo "Oscam is still OK!" >> /var/cccamlog/oscam.check
fi
...
whereas in /var / script / oscamckeck.sh
i see OscamCkeck.sh and I do not have / var / cccamlog / oscam.ckeck -
all is ok
after sweating
error configuration of the groups
I had several groups and had to commit the use of camd3.5 (server box 1) with other groups -
hello
have you experimented with two server pc linux oscam ?I tried with two oscamd server pc linux
I am not yet arrived
for the address of dns
"device = xxxxxxx.dyndns.org, 25550" ?
or
"device = http://xxxxxxx.dyndns, 25550" ?
difficult to check if a port is open UDP -
thanks
all is ok -
Hello
sbt dreambox 500s (used as server)or where the HTML files for web info page?
or I'm looking for a script to make the web pages info to refresh automatically
Thank you if you have an idea for your help will be precious to me
(I tried a bunch of config on the ACPC cfg file) -
all things have been solved by myself, after many efforts and sweat
your help was very very .............. valuable:fish slap: :confuse: -
I'm saying that I do not have the directory cccamlog!
-
I have a 1.10rc version oscam svn build 6481
and I find no oscam.check file in var / log nor in / var / cccamlog
also cccam log directory does not exist on my pc
My script file is as follows:#!/bin/sh
process=`ps auxwww | grep oscam | grep -v grep | awk '{print $1}'`
if [ -z '$process' ]; then
echo "Couldn't find Oscam running. Restarting server-binary" >> /var/cccamlog/oscam.check
echo && date >>/var/cccamlog/oscam.check
/usr/local/bin/oscam >> /var/cccamlog/Oscam.log &
else echo "Oscam is still OK!" >> /var/cccamlog/oscam.check
fibecause the webif crashes often even qu'oscam
thank you
-
excuse for the translation (translate)
I have a pc server oscam-svn 1.1 RC build 6481, this is sure that this is not the most rescente (I am a beginner in linux and oscam) but it works very well but in waitime an update I'm still in this version
I also installed the same oscam with a friend, he has a card with all channels "csa" on a card "orange" I can configure the file remotely by webif
the only problem is that only all adult channels can be played for a client !!I see the connection to the caid and sid for these channels, then these channels ecms return zero. (by no found (xxx ms)
questions: where should we change to allow these chains adults (penthouse xxl, dorcel, pink tv)
(I changed all files services because I am under canalsat Caribbean)
ecmwhitelist.? create somefile oscam.whitelist or something else?nota : a reading of the card in a SBT ariva ferguson 102 in the menu Cas, I note that the information Maturity rating is locked
to open and unlock these chains must put his pass for access to adult channels
we have already made a server openbox that worked very well with the chains adults (after the autorisation of Maturity adult of receiver) but as Pc Oscam how to do this ..
thankfrench
pas de lecture ecm des chaines adultes
excuse pour la traduction (translate)j'ai un serveur oscam pc 1.1 rc-svn build 6481 ,bon c'est sure que cela n'est pas la plus rescente (je suis débutant sous linux et sur oscam ) mais il fonctionne très bien mais en attendant une mise a jour je reste toujours sous cette version
j'ai aussi installé ce même oscam chez un ami ,lui a une carte avec toutes les chaines "csa" sur une carte "orange" je peux configurer ses fichier a distance par le webif
le seul probleme c'est que seulement toute les chaines pour adulte ne peuvent être lues pour un client
je vois bien la connection vers le caid et son sid pour ces chaines ,puis les ecms de ces chaines retournent retourent a zéro.
questions: où faut- il modifier pour autoriser ces chaines adultes (penthouse ,xxl,dorcel ,pink tv)
(j'ai modifié tous les fichiers de services car je suis sous canalsat antilles)a la lecture de la carte dans un SBT ferguson ariva 102 dans le menu du Cas ,je note que l'information Maturity rating est locked et pour ouvrir ces chaines il faut débloquer mettre son pass pour avoir acces aux chaines adultes
on a déja fait un serveur sous openbox qui fonctionnait très bien avec les chaines adultes (après l'autorisation du Maturity adulte) mais sous le Pc Oscam comment réaliser cela..
merci
creer unfichier oscam.whitelist ou autre chose ? -
well I'll try to do my test myself
thanks -
hello
How many customers can you get without too much freeze on a server oscam pc
line with a 1m b / s (reel 700 kb / s upload) knowing that a client connects between 250ms-450ms (LB Value / Reader)
what method of calculation
thanks -
because I do not see my post written a day earlier
Thanks