is it a loop back issue ¬
if i want to connect to my server on local you must use LAN ip 192.168.wot.eva - - - -
perhaps there is looback issue if you try using dns or public ip =you only use public ip or dns from a remote location/peers
Posts by rikjaard-real
-
-
wicked avatar ¬ take a moment to make an introduction post please mate and i will have a think - i flashed my tm600 the other day and had a similar issue
-
Dont worry ¬
its a good question though -
i assumed that they refer to oscam program running - perhaps like "task manager" and the Http client being Apache ?However now the question has been asked i'm sure a more knowledgeable Answer will be forthcoming !
Be sure its nothing to worry about dude ¬ unless its not there
-
Display More
Hi everyone,
I'm new to this sat world, I just got a VU+ duo box, loaded the latest BH image, uploaded cat's eye channel list, all looks good so far... BUT I seriously started thinking to return the box and get my money back ...and here is why:
My problem is:
are all theses boxes(TM, DM, VU+, etc) made to work only by being connected to internet? ..because I cannot have mine connected to the internet, my 3g router cannot connect to internet using my mobile broadband connection usb stick, however I can only use it for PC.
It doesn't need to be connected to the internet for Free To Air channels HOWEVER if you want to take advantage of its potential then YES an internet connection is required !
Please make an introduction post introductions/ And take a moment to read the forum rules ¬ Thanks
-
Omnikey have a huge product range - HID OmniKey Smart Card Readers, 3121, 3021, 5321, 4040 ...
Take a look ¬ i would suggets the main reason its cheaper is its not a "SATELLITE" specific product ¬ :dribble:
like annie stated - The world is flooded with them - -
From my experience i find the omnikey delivers the quickest ecm times with nd5 uk subscription !
I -
We are not aware of any "keys" in the public domain for this service ¬ my belief is they're not available as ND5 encryption has not been compromised -
-
check in usr/local/etc
does your oscam.conf have the following instructions ?
[webif]
httpport = 8888
httpuser = root
httppwd = admin
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,0.0.0.0-255.255.255.255check the httpport to start with it could be different ?
-
1000 clients - That is a lot of people ¬
-
why not use OScam it has support for newcamd connection unless i'm mistaken _ Surely thats your best option ?
:rikjaard1:
-
Please take a moment to peruse the house rules - forum-rules/
its always best to introduce oneself ¬ Samaritans help strangers !
:rikjaard1:
-
The parameters in green are correct new settings from 8/9 previously -
(22h50) BBC & Freesat & bbc Digital: New FEC for BBC HD on 10847.00MHz, pol.V: FEC:2/3 ( SR:23000 SID:6940 PID:5500[MPEG-4] /5501 English,5502 English - Clear).
(22h50) BBC & Freesat & bbc Digital: New FEC for BBC One HD on 10847.00MHz, pol.V: FEC:2/3 ( SR:23000 SID:6941 PID:5400[MPEG-4] /5401 English,5402 English - Clear).:rikjaard1:
-
if you are in windows you can use a program called putty to access your server.
or use filezilla and edit the file through the path /etc/cron.di use the putty method if im on windows !
G edit and nano
Scheduling Backup Jobs using at and crontab in debian linux crontab at files format or syntax:rikjaard1:
today i changed the cronjob in my debian server
from the keyboard or ssh - putty
type these commandscd /etc
The above command will change directory to /etc
type
ls
this is list command to see files in that directory ¬
to look in a file type command below,
more crontab
now you can read the crontab _
if you want to edit type
nano crontab
After editing hold control key + o
Then enter key
Finally hold control key and xHave fun
-
easy tether is a free app if you using android !
-
Down and to the left ¬ I bet your on Astra 19.2 OR Astra 23.5 -
Did you use a satellite meter ? or just the signal page on the box ?
the dish has a lower elevation angle than you think !
i think you should get07d4 transport stream
0002 network id -
Astro (09AC:0000)
ATR: 3F FF 11 25 03 10 80 41 B0 06 69 FF 4A 50 70 00 00 41 5A 01 00 11
CAID: 09ac
ECM: ok
EMM: ok
Tested on: Linux i686card country caid:provider mhz readers tested
Astro Malaysia MY 09AC:0000 OK - OK - - - - 3.57 - smargo ok, pcsc ok
-
have a read through these two oscam wiki ¬
Most cards can be read ! Please state your intentions to obtain a more specific answerType of card readers
DeviceList+
Card List
Stay cool
:rikjaard2:
-
you dont need the spider box if using a rf modulator u come out of the vu duo with the scart into the rf modulator then out of the modulator to the uhf in on the booster then that will send a signal to all the tvs in the house
If your not planning on using the spiderbox anywhere else in the house i would leave it above/below the vu+ box and loop the fixed dish input from the spider onto the VU+ via the satellite I.F Loopthrough ! That way when your watching summit on the motorised duo input the fixed dish signal can be used by the spider allowing you to watch different channels at the same time in a second location connected via existing cables ¬ IF of course your not recording onto the duo from the fixed dish that is ¬
As per the previous post if you just want to use the VU+ to distribute signals around the house limiting your best bet is the modulator i posted a link to !
-
hi mate thanks for reply but this is getting really technical
Let me remind you where you are Carmine :snicker: LINUXSAT-SUPPORT LoL
Go back a post and check my last reply lol ¬ Sometimes taking on the challenge can be very rewarding and worthwhile in terms of Value for money ! Yes i know it worked before BUT so did black and white TV transmissions,owever were not all still using that system are we ?using a cheap rf modulator will solve your issue for no more than £40ish ¬ EBAY LINK
:sheep:Looking at my post count shows i'm in search of a life - just in case you find a spare one listed whist perusing Ebay
:rikjaard2:
-
I'm sure muso uses a cat5/wireless iptv disribution system ! That way you could have different channels in different rooms if you leave the spider in situ and use the I.F loopthrough ¬ assuming the spider has I.f Loopthrough !
