Short version:
Because no one is so crazy as to tackle and spend their time FOR FREE on the challenge of dealing with MPEG-DASH manifests packaged with various ISO boxes, fragmented with Piff or other security measures.
Posts by FrancHR
-
-
For Gigablue only 4k devices.
Why?
No mipsel/sh4 support anymore from various reasons.
-
-
Solution for what?
FATAL SIGNAL?
Where is the crash (which operation). what you expect, which box you have?
If you trying to translate TTX subs outside Novaler box... not possible.
-
-
if Team allow me to mod The skin by adding poster via xtraevent , i will share it
Yes, we allow.
But as we want to kept Infobar/channel selection as it is (at least for now), you can make it in the second infobar. You can remove weather widgets to get more blank space, make two events with two posters (now and next). After you finish name the screen "SecondInfobarPoster".
This approach is something new which i want to test (without extra panels, etc...) and i can't guarantee that will work, so If everything goes right i will add your screen to the EstuaryConfig as an additional option for the SecondInfobar screen.
In fact i am sending you SecondInfobar, without widgets, only with now event, clock, date. So you can remove whatever you want, just please keep original roster, at least down part.
-
Display More
Hello, i just tested last image on my Dreambox Two. GUI very impressive, settings overdosed, i can switch off egp grabbing from transponders, so everything's looks fine.
I just installed my favorite skin HD glass, and my favorite EPG grabber, epgimport plugin, try to set all, upload my channel list, and then reboot the box, and looks like works good.
But unfortunately i can't download anyting through hdglass skin, because said my flash is full (it has internal 16GB EMMC and 4GB flash) so someting's wrong, finally i began watch tv without picons and additional files, but after 6 hours my box self- rebooted, and i got flashing red light.
Today i succesfully bing it back to live with service usb- serial cable, putty, and a rescue image, after i upload a backup, box updated cpu code, so if you can develop it in the future, will be good, all others use conventional simply settings, weak plungin compatibility, so this image is the first after 1.5 years, i want to use forever.
At this point this image destroy dreambox two boxes.
Thanks!
DMM One/Two are still in Alpha development stage.
-
First, we can't see anything strange in your debug logs.
Sadly we do not own Amiko Viper 4kv30 to see what is the real problem in the realtime, so everything which is connected with this box are made in blind mode.
But in blind we cannot fix such issue, especially if there are no strange things in the debug log.
-
PurE2 can't support DMM on a complete base, only in blind mode, as a team does not have DMM support.
In this case, it's hard to say where the problem is and we can't help too much.
Sadly, we must say "use it as it is" or try with another image.
-
-
Images from 07.08.2022
- new player in FileManager-FNC and in enigma2 (MovieList)
What is FNCplayer?
FNCplayer is an interactive and new enigma2 player (similar to Kodi player). Part of pure2 image, and it can't be installed from the feeds.
To get FNCplayer on your box you need to update/reflash your box with image from 07.08.2022 (dd.mm.yyyy) or younger.
Keep in mind this is the first beta version of player.
Here you can find more screenshots from different skins.
I don't like FNCplayer, i want back the old player, how i can achieve that in MovieList?
1. Open MovieList (sometimes called Movie Selection, Playlist, etc...)
2. Press Menu
3. Choose Settings...
4. Set default player = Default
5. Restart e2
I want back the old player in FNC plugins, how?
You can't. FNCplayer will be default player for all Pure2 extensions, for now FileManager-FNC and FilmXY-FNC ver. 2.2. Later for all.
I don't like default skin in a player (Estuary), how i can change this?
For now, FNCplayer has 3 skins, Estuary as default, unitybule and unityred. In player options (you need to start some movie first), choose Player Options and change skin.Is FNCplayer available on other languages except English and Croatian?
For now no.
You can help us to translate to your own language. Just download FNCplayer.pot from this page and use PoEdit. After you translate send us .po/.mo file(s) back.
-
I installed new Sportklub FNC plugin in my box ( DM800 SE , v.6.2 ) , but not work. The message is "No module named multiprocessing pool".
Please , can you tell me where to find that python module or maybe the plugin is not prepared for old version.
Thank you.
you need to install python-multiprocessing module. But 6.2 feeds are off so you need to install manually.
Will this work (in attachment) i don't know. it depends about module dependencies. Also i do not remember which version of libc is in 6.2. For this ipk must be 2.28+
If still doesn't work you need to install all dependencies manually. Check control file in ipk to see all of them
-
v 1.0
For EX-YU users: all news, clips, videos, podcasts, etc, from SportKlub official site .
Za ljubitelje sporta, sve sa sportklub stranica na vašoj kanti. Najnovije novosti, hrpa sportova (kategorizirano), video klipova, podcasta...
Pošto se sadržaji međusobno razlikuju od države do države, za sada u dvije verzije (Hrvatska i Srpska). Neke stvari iz srpske verzije su dodane u HR, kao npr podcast (pošto isti na HR ne postoji), itd...
https://www.pur-e2.club/OU/images/index.php?dir=Plugins/SportKlub-FNC/
P.S.
Šaltanje sa glavnog izbornika na sadržaj i obratno... sa tipkama sa kojima prebacujete programe (negdje P+-, negdje CH+-, ovisno o modelu daljinskog). Isto kao i na FilmXY-FNC.
e20041cc.jpg fde3bc8e17dd0500.jpg 479d24437c.jpg 750ea3333d.jpg 70b1f850bf27094cb.jpg 48085f675d00516ac.jpg
-
v 2.2
- french translation (thx Raze)
-
v 2.1
- pass ghost mounts
-
AX60 new drivers, sys libs, etc....
Reflash needed!!!
New Recovery v318 (be careful!)
Novaler4k and Maxytec Multi --- > reflash needed
AX60 and Mutant60 ---> reflash needed
New Recovery (be careful!)
-
Well, If you don't know where are skin xml's then better try to install some LCD skin from the feed.
Let me say first i do not have experience with LCD skins because i don't have box with such display and i hope this will work for you.
opkg list | grep LCDskin
- after that install some from the list (opkg install ...)
- restart e2
- in pManager try to change LCD skin
-
What skin you have as default i don't know, but these are usually screens with the "summary" prefix in screen name (in most cases, not all). Open xml and edit font sizes.
Also you can change your LCD skin from pManager.
-
... picons doesn't work, it always gives an error and blocks the box.
Where can I find more skins?
"picons doesn't work" is not enough. No one can help you without detailed explanation and /or detailed debug logs.
To change picon path: Setup ---> System ---> User Interface ---> Picon Path (/media/usb/ is default).
More skins on skin feed.
-
ver. 2.0
What every image lacks is a file commander/explorer, where some operations such as copying, moving, renaming, deleting, creating folders ... can be performed easily and without complications with a remote control in hand, without the need to turn on PC, laptop, FTP and all sorts of wonders/miracles.
Following the example/simplicity from Kodi here is one for PurE2 users.
Features:
- copying , moving, deleting (with detailed progress info)
- renaming
- setting permissions and ownerships
- background operations (copy, delete, move and watch your fav channels)
- built-in image viewer
- built-in media player (FNCplayer)
- each mount (local or remote) will be visible
- various settings
- view/edit all of kind of text files
- decompress rar, tar, zip, jar, 7z, cab and deb archives (limitation in this version; archives without password only)
- install ipk's
- make Folders and Files
- properties of file and directories
- metadata info for multimedia files
- all PurE2 images are mounted to your STB
- all PurE2 Plugins are mounted to your STB
- configure cache location (this is required for remote mounts)
- delete cache manually
- run remote mounts with advanced debug
- run scripts (python and bash)
- a lot of fixes and code optimization
- from this version you can add remote services as mounts, protocols; http, https, FTP, sFTP, webDEV, Mega.nz, Alldebrid, Google Drive.***
***What does this mean?
- http and https protocols
- You can mount any web page where you can find open directory (google how to search open directory, you will find a lot interesting information, movies, music, etc...). The only limit is your imagination.
- FTP and sFTP
- You can mount any FTP and sFTP server to your STB
- webDEV
- it's an old protocol but not dead yet. There is a millions services around the internet with such protocol (box.com, freenet.de, magentacloud.de, HiDrive, openDrive, pCloud, alldebrid, real-debrid, premiumize, furk, yandex cloud, etc, etc, etc....
- Mega.nz
- you can mount all your mega.nz accounts to STB
- Alldebrid
- mount AllDebrid via username and password (API key)
- Google Drive
- mount gDrive directly to your STB (in this version of plugin manually only)
So, you can add unlimited services, accounts, clouds, open directories. Copy, delete, move between services without limitations (with read-write access of course).
Note:
keep in mind this is still Beta version.
Also, when you mount any service or folder with read-write permissions you are must be aware; you are doing it at your own risk! Your data may get lost at any time!
