Posts by larsmads1
-
-
which Receiver and which Image?
Sorry forgot to mention which box
Vu+ Uno 4k SE
BlackHole 3.1.0.H
-
need help cant find for my usb network adapter
Description: Realtek 8812BU Wireless LAN 802.11ac USB NIC(Realtek USB3.0 802.11ac 1200M Adapter)
Device Type: Vendor Specific
Protocal Version: USB 2.10 <- Hint: This device can run faster when plugged to a USB3.0 port
Current Speed: High Speed
Max Current: 500mA
USB Device ID: VID = 0BDA PID = B812
Serial Number: 123456
Device Vendor: Realtek
Device Name: USB3.0 802.11ac 1200M Adapter
Device Revision: 0210
Controller Part-Number: Unknown
-
its a bit Stranges cos i use the same Oscam binary and i have no problems whit that i use a Huawei B525S router and my internet working whit problems
i first noticed it when i thought the net was down in the house and i used my mobile broadband router from telia (Huawei E5186S) after about 24 hours it had used all my data which was about 30gb
If you turn off the set-top box or pull out the LAN cable, overloading your LAN will be resolved ?
Are you sure this network overload is causing Oscam ? Try stopping Oscam and see if the LAN overloading has really been resolved.
i did check with speedtest.net with and without the box connected to the lan and the difference is huge
-
Display More
Yes, but you can have different network hardware in set-top box (NIC), different speed from internet provider, different firmware in set-top box (Enigma), otherwise configured router, maybe you use different protocol in softcam ... all this can to make the difference that in your case it doesn't overwhelm the Internet.
It is possible to diagnose a network congestion problem by X - ways. In the case of a high-quality router, or at least using the appropriate firmware (such as "dd-wrt" firmware - if the router's hardware allows it), you can even view real-time data flow on each network interface of the "gateway" (router). There it is possible to monitor in real time the actual data flow to / from WAN or within LAN, or even between individual machines in the LAN network. It is also possible to diagnose on the operating system in the PC, depending on the installed version of Windows or add-ons (application firewall, antivirus system, etc.). For Linux PCs, it is also easy - just search Google for how to do it, according to your Linux distribution, or find which network monitoring tool to use in Linux.
///////// EDIT :
Where exactly are you newbie ? You mean setting up Oscam or installing it ?
Changing the binary is very very very simple:
- Find which binary file is in the set top box, ideally via the Shell: find /usr/bin -name "*cam*"
- Download the Oscam binary file for your chipset architecture (arm7, mipsel, sh4, aarch64 / arm8) - i.e. designed for your set-top box
- Stop the Oscam: killall -9 <oscam_service_name> (usually the service name is the same as the binary filename from the "/usr/bin" folder)
- Upload and rewrite the new binary file instead of the original one
- Set the file attributes to 755 - via total commander in FTP or Shell, for example: chmod 755 /usr/bin/oscam
- Reboot - for example, using the Shell: reboot
I recommend everyone a manual way to install Oscam: Tutorial : How to install softcam (OSCam/CCCam) manually, if you hate ipk packages
However, you may lose some graphical interface features (if Enigma supports Softcams in the GUI - such as the SoftcamPanel plugin).
ipk packages are i used with also editing some with ultraedit
some telnet i know ftp are i used with
what is the shell?
-
its a bit Stranges cos i use the same Oscam binary and i have no problems whit that i use a Huawei B525S router and my internet working whit problems
i first noticed it when i thought the net was down in the house and i used my mobile broadband router from telia (Huawei E5186S) after about 24 hours it had used all my data which was about 30gb
-
Got it working but now is the issue that the box makes the internet in the house very slow unstable and it is using more than 50% of the capasity
Try another Oscam binary. I've heard that there are also binaries from unknown sources that share your decode card to all people in the world and you don't even know about it (and you don't see it in oscam-LOG).
If it is not a piracy, the communication softcam protocol (cccam / newcamd) or its configuration may be a problem. You can also try to set or limit other versions of the protocol (cccam / newcamd).
the oscam i got is from icecool_denmark he also think this is strange... i am totally newbie to oscam more used to cccam
-
Got it working but now is the issue that the box makes the internet in the house very slow unstable and it is using more than 50% of the capasity
-
Display More
and it work now i just forgot to add
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.2
stealth = 1
I put this in the oscam.server file?
sorry for asking stupid questions
-
Hi
You have finally managed to upgrade to BH 3.0.9G
Use attachments, it is plug and play for CD Nordic.
How do i get the old c lines to work with oscam?
-
Hi
You have finally managed to upgrade to BH 3.0.9G
Use attachments, it is plug and play for CD Nordic.
Yes i managed to upgrade finally after all this years :)
Thank you so much will install now
-
Hello which oscam do i need for vu+ solo2 with black hole 3.0.9 image? and where to find it
-
Do you use Blackhole 3.
Do you use Blackhole 3.0.9?
i use a older version 2.1.5
-
originaltunern er gitt bort for lenge siden ble aldri åpna har prøvd og få cd til og sende signaler på nrk1 men ikke latt den stå over natten
-
See you write it has worked before, same card?
If it's new then only oscam works!
Test the card in the original tuner, it works there so it should also work in solo2 if you have the correct Cccam installed.
it worked like a month ago.. then suddenly it stopped to update the card..this card is 10 years old..
also got a new card as backup it does not work either
-
Hello i have a vu+ solo2 with cccam 2.30 and canal digital nordic card in cccam info it reads the card entitlements etc but i cant get any picture on the channels the card is for it used to work before ...Also have reinstalled the image and cccam
Help anyone
-
Thanks! problem solved now working :)
-
Hello where do i find newest cccam for blackhole image for vu+ solo2 ?
