Posts by superglud

  • not clearing Viasat 093E card on VU+Uno with smargo reader and BH 2.03 image

    Quote from dbstaff

    Does anyone know why Oscam status log is showing the message "plain dvapi-client granted (AU=off)" when the AU is NOT off..please see picture with config d4aafe50dc5a.png23562ac8f5f570f5233f.png


    Adding au = 1 in oscam.server [reader] section, did the trick for me.
    au = 1 (Undocumented feature)


    FYI:
    [newcamd]
    port = 34001@090F:000000;34002@0B00:000000
    should be changed to
    port = 34001@093E:000000;34002@0B00:000000


    Best regards

  • MGCAMD sometimes goes to sleep or gives picture freezes.

    I am running this version on my two VU+ ultimo's (Blach Hole)
    (is working on both OE1.6 and OE2.0)


    MGcamd 1.38.c Stable-mips E2 by Leo11- 04.12.2012
    ************************************************** ****************
    ----- ENIGMA II---------- ENIGMA II---------- ENIGMA II---------- ENIGMA II
    Deutsch: Getestet mit Octagon und VU+Geräte.
    An erster Stelle wird die Stabilität beim CS verfolgt!
    In the first place the stability of the CS is followed!
    EMU -Al Jazeera Sports
    Die Version ist Angepasst worden für Octagon und VU+Geräte.
    Testen!
    ************************************************** ****************
    ----- ENIGMA II---------- ENIGMA II---------- ENIGMA II---------- ENIGMA II



    FYI:
    I can run "MGcamd 1.38.c Stable-mips E2 by Leo" with no problems at all
    I can run "E2_Mgcamd_138_bh" with no problems at all
    I cannot measure any differences, both work like a charm


    Regarding MGcamd 1.38c
    check the Thread: MGcamd 1.38c at w*w*w.v*u*p*l*u*s*t*e*a*m.c*o*m



    Best regards

  • Roy Image BKP QBOXHD Latest

    Roy Image BKP QBOXHD 7.4.2012
    ============================================================ ================


    uboot 24.11.2010
    ============================================================ ================
    Release BETA 10.0.16


    - Bugfix: Upgrade satellites.xml.
    - Bugfix: Upgrade terrestrial.xml (added transponder for Estonia).
    - Bugfix: Upgrade cables.xml (added transponder for Estonia).
    - Bugfix: Added the Estonian language.
    - Bugfix: The "TV Settings" menù is not displayed it when it is used the default skin.
    - Bugfix: Some options of "TV Settings" menù (Just scale, Letterbox, ect.) are not applied when the decoder is restarted.
    - Bugfix: Some minor bugfixes.



    ============================================================ =================


    what new ?
    add oscam 6576 new oscam truck 1.20
    LT6SKIN v2.0.45



    * oscam oscam 6576 *
    * radar 4.22 *
    * radar sat sharing 4.22 *


    http://***.sendspace.com/file/rbyg22


    Tribute to Victor


    FYI:
    I do not know, if there exists a newer version, if so please let me know



    Do not use the link directly.
    Just type it manually, and replace *** with www


    Best regards

  • Time Shift on BH

    Quote from zak2000

    Hi I'm new to this technology and I purchased an Ultimo and previously had Humax iCord HD+ , the only thing I miss now is the time shift that records automatically as you shift from one service to another which I'm not able to do on the Ultimo , anybody can help?


    Install PermanentTimeshift plugin (permanent time-shifting plugin for oe1.6 images)


    ftp enigma2-plugin-extensions-permanenttimeshift_1.0.1_mipsel.ipk to /tmp
    install via green-button yellow-button


    Best regards

  • mgcamd not working on latest BlackPole image

    Hi


    I am running mgcamd1.38 on two Vu+ Ultimo's (One with oscam server, and one without)


    Here is a working mg_cfg for vu+ boxes (# box type B: { 06 })
    (Confirmed working on Vu+ Duo and Vu+ Ultimo)


    Best regards


    #########mg_cfg############
    ###########VU+############
    ##########################


    # EMM messages
    # 00 don't show any EMMs (default)
    # 01 show only valid EMMs
    # 02 show valid and bad EMMs with complete data display
    M: { 01 }


    # ECM messages
    # 00 don't show anything about ecm
    # 01 normal mode, show pids processed, decoded ecm and cw
    # 02 verbose mode, show valid and bad ECMs with data
    C: { 02 }


    # AU
    # 00 disable, no emm pids processed
    # 01 enable, emm pids always processed for soft-au and shared cards
    # 02 auto, emm started only if channel cant be decoded
    # 03 process emm pids for network cards update only
    A: { 01 }


    # key update (sum 01 or 02 with 04)
    # 01 update only new keys, default setting
    # 02 update all keys (used for valid PMK checking)
    # 04 enable TPS au
    # + tps SID, which pmt pid contains au pid
    U: { 01 } 0x12c0


    # config files folder (softcam, autoroll, ignore/priority)
    # 00 files in /var/keys
    # 01 files in /tmp
    T: { 00 }


    # network mode, use summ for several clients
    # 00 no network (default)
    # 01 newcamd netclient
    # 02 radegast netclient
    # 04 camd3 netclient
    # 08 gbox netclient
    # 32 cccamd netclient, card list saved as /tmp/cccamd.info
    # (ECM only, supported server version up to 2.1.1, later not work)
    G: { 01 }


    # network retry, use summ for several options
    # 00 disable
    # 01 retry every new ecm
    # 02 try to connect to offline shares every Q: seconds
    # 04 try to detect and fast reconnect to lost (and not used atm) server
    # + XX messages number and YY seconds to reconnect
    # mg will reconnect to server, if no answer to last XX ecm/keepalive or
    # if no answer for last ecm or keepalive sent for YY seconds
    # set to 0 to disable
    N: { 07 } 5 30


    # network ecm timeout in seconds
    K: { 15 }


    # newcamd dead routes connect retry, sec
    Q: { 10 }


    # network shares priority
    # 00 gbox, newcamd, cccamd, radegast, camd3 (default)
    # 01 camd3, radegast, cccamd, gbox, newcamd
    # 02 cccamd, newcamd, camd3, gbox, radegast
    P: { 00 }


    # on screen display type
    # 00 No OSD (default)
    # 01 neutrino
    # 02 enigma
    # 03 relook
    # + user password for http auth
    O: { 00 } username password


    # on screen display Options, summ of:
    # 01 show emu ecm
    # 02 show network shares messages
    # 04 show decoding failed / fta
    # 08 show emm keys update
    # + web port to use for osd
    S: { 03 } 80


    # Log option, summ of:
    # 00 off
    # 01 network udp log
    # 02 log to console
    # 04 file, appended ! delete it by yourself, before it eat all your hdd
    # + IP udp-port log-file-name
    #L: { 02 } 172.16.1.1 28007 /tmp/mgcamd.log
    #L: { 04 } 127.0.0.1 28007 /tmp/mgcamd.log
    L: { 00 } 127.0.0.1 28007 /tmp/mgcamd.log


    # keep ecm cache, seconds
    # every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
    # for openbox/elanvision users with remote shares make sense to set it higher than default value,
    # to not hammer cards while timeshifting or playing crypted recordings.
    E: { 15 }


    # cache option, summ of:
    # 00 Off (default)
    # 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
    # 02 Ecm data cache, remember CW for (E:) time
    # 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
    H: { 07 }


    # reread files, summ of:
    # 00 No (default)
    # 01 reread config file on channel change (including priority and ignore, but not replace/cache)
    # 02 reread SoftCam.Key on channel change
    # 04 reread SoftCam.Key if file changed
    R: { 04 }


    # debug, summ of
    # 00 off (default)
    # 01 debug ecm
    # 02 debug emm
    # 04 debug network ecm
    # 08 debug network emm
    # 16 debug network login
    # 32 show mem/cpu stats every 1 min
    # 64 add timestamp to log messages
    D: { 00 }


    # box type
    # 00 autodetect, change only if you think wrong type detected.
    # 01 dbox2
    # 02 dreambox
    # 03 triple-dragon
    # 04 relook
    # 05 openbox
    # 06 dreambox/mips
    # 08 stapi/kathrein
    # 09 stapi/ipbox
    # 11 stapi/openbox
    #B: { 00 }
    B: { 06 }


    # map all 180x nagra caids to 1801
    # default is 01
    F: { 00 }

  • DVB-T2 USB tuner (AAC-HE (HE-ACC) audio support ?)

    I see that the PCTV nanoStick 290e DVB-T2 USB tuner is supported on VU+ boxes at least in Blackhole images.


    I have a Vu + ultimo and need an addional DVB-T tuner


    But i need AAC-HE (HE-ACC) audio support


    Does anyone know if "PCTV nanoStick 290e DVB-T2 USB tuner" is supporting AAC-HE (HE-ACC) audio ?


    Best regards