Posts by welder1977

Hi all, hope someone can help. I stupidly played about with the settings before reading up on the receiver. It keeps telling me Wrong image so I went into BIOS setting an changed it to NAND but is still wouldn't boot up, same problem wrong image, TPFT load but would not load. So I then tried a factory reset which has no left me with a blue screen and I'm still getting wrong image message. Is there a way I can re install the image etc??
Cheers
Mark

Yeah Ben did a 51 update then says rebooting but gets stuck in boot made again. guess its truly broken!! Shame this dual boot receiver is so reluctant & unhappy being used for just that. I got this for my dad for a xmas gift thinking it would be more reliable then a clone DM!! lol
Cheers for all your help fella

ok of reading from here and youtube i worked out where the spaces were needed in the first command and now have my box running but looking at the sparks software upgrad I have no option for1.2.51 only 54 or 58???
thanks

hi you say enter the commands but do I enter the first one then press enter to get the space between the lines?

set bootargs console=ttyAS0,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:0037:04:15:00

ip=192.168.40.83:192.168.40.19:192.168.40.1:255.25 5.0.0:lh:eth0:off

stmmaceth=msglvl:0,phyaddr:1,watchdog:5000 bigphysarea=6000

nboot.i 0x80000000 0 0x00100000 ;bootm 0x80000000
Thanks

well im happy to type it in but on every site i have seen this on it is shown like this
set bootargs console=ttyAS0,115200 rw ramdisk_size=6144 init=/linuxrc root=/dev/ram0 nwhwconf=device:eth0,hwaddr:00*:06:37:04:15:00

ip=192.168.40.83:192.168.40.19*:192.168.40.1:255.255.0.0:lh:e*th0:off

stmmaceth=msglvl:0,phyaddr:1,w*atchdog:5000 bigphysarea=6000
These have a space or is this all one line?
Cheers

how can I paste the command into PuTTY?

Hi I have the same problem my alien2 is stuck on INIT BOOT. can some one give me a heads up of what to do with putty and how to fix my problem please